1,481 research outputs found
Optimal passive filter design for effective utilization of cables and transformers under non-sinusoidal conditions
Transformers and cables have overheating and reduced loading capabilities under non-sinusoidal conditions due to the fact that their losses increases with not only rms value but also frequency of the load current. In this paper, it is aimed to employ passive filters for effective utilization of the cables and transformers in the harmonically contaminated power systems. To attain this goal, an optimal passive filter design approach is provided to maximize the power factor definition, which takes into account frequency-dependent losses of the power transmission and distribution equipment, under non-sinusoidal conditions. The obtained simulation results show that the proposed approach has a considerable advantage on the reduction of the total transmission loss and the transformer loading capability under non-sinusoidal conditions when compared to the traditional optimal filter design approach, which aims to maximize classical power factor definition. On the other hand, for the simulated system cases, both approaches lead to almost the same current carrying (or loading) capability value of the cables. © 2014 IEEE.This work is supported by Turkish Republic Ministry of Science, Industry and Technology and BEST Transformers Co. under the project number of 01008.STZ.2011 - 2
An algorithm for optimal sizing of the capacitor banks under non-sinusoidal and unbalanced conditions
In non-sinusoidal and unbalanced systems, optimal sizing of the capacitor banks is not a straightforward
task as in sinusoidal and balanced systems. In this paper, by means of qualitative and quantitative analysis, it is interpreted that the classical capacitor selection algorithm widely implemented in Reactive Power Control (RPC) relays does not achieve optimal power factor improvement in non-sinusoidal and unbalanced systems. Accordingly, a computationally efficient algorithm is proposed to find the optimal capacitor bank for smart RPC relays. It is further shown in a simulated test case by using Matlab software that the proposed algorithm provides better power factor improvement when compared with the classical algorithm. It is also figured out from the simulation results that both algorithms cause almost the same harmonic distortion and unbalance deterioration levels in the system
A filter design approach to maximize ampacity of cables in nonsinusoidal power systems
This paper presents an optimal design of the C-type passive filters for the effective utilization of the power cables under nonsinusoidal conditions based on maximization of the harmonic derating factor (HDF) of a power cable, where maintaining the load true power factor at an acceptable range is desired. According to IEEE Standard 519, the total harmonic distortions of the voltage and current measured at the point of common coupling are taken into account as main constraints of the proposed approach. The presented numerical results show that the proposed approach provides higher current carrying capacity, or ampacity of the cables under nonsinusoidal conditions when compared to the traditional approaches based on minimization of the current total harmonic distortion and maximization of the true load power factor. A numerical case study is presented to demonstrate the proposed approach
Optimal design of single-tuned passive filters using response surface methodology
This paper presents an approach based on Response Surface Methodology (RSM) to find the optimal parameters of the single-tuned passive filters for harmonic mitigation. The main advantages of RSM can be underlined as easy implementation and effective computation. Using RSM, the single-tuned harmonic filter is designed to minimize voltage total harmonic distortion (THDV) and current total harmonic distortion (THDI). Power factor (PF) is also incorporated in the design procedure as a constraint. To show the validity of the proposed approach, RSM and Classical Direct Search (Grid Search) methods are evaluated for a typical industrial power system
Plasmon-polaritons on graphene-metal surface and their use in biosensors
Cataloged from PDF version of article.We studied excitation of surface plasmon-polaritons on graphene-metal surface. The metal surface is functionalized by transfer printing of graphene grown by chemical vapor deposition on copper foils. Surface plasmon resonance characteristics of monolayer and multilayer graphene on the metal surface are presented. We were able to obtain the dispersion relation of graphene-metal surface which reveals the essential feature of the plasmon-polaritons. As an application, we fabricated a surface plasmon resonance sensor integrated with a microfluidic device to study nonspecific physical interaction between graphene layer and proteins. (C) 2012 American Institute of Physics
Critical coupling in plasmonic resonator arrays
Cataloged from PDF version of article.We report critical coupling of electromagnetic waves to plasmonic cavity arrays fabricated on Moire surfaces. Dark field plasmon microscopy imaging and polarization dependent spectroscopic reflection measurements reveal the critical coupling conditions of the cavities. The critical coupling conditions depend on the superperiod of the Moire surface, which also defines the coupling between the cavities. Complete transfer of the incident power can be achieved for traveling wave plasmonic resonators, which have a relatively short superperiod. When the superperiod of the resonators increases, the coupled resonators become isolated standing wave resonators in which complete transfer of the incident power is not possible. Analytical and finite difference time domain calculations support the experimental observations. (C) 2011 Optical Society of Americ
Absorption enhancement of molecules in the weak plasmon-exciton coupling regime
Cataloged from PDF version of article.We report on the experimental and theoretical investigations of enhancing the optical absorption of organic molecules
in the weak plasmon–exciton coupling regime. A metal–organic hybrid structure consisting of dye molecules
embedded in the polymer matrix is placed in close vicinity to thin metal films. We have observed a transition from a
weak coupling regime to a strong coupling one as the thickness of the metal layer increases. The results indicate that
absorption of the self-assembled J-aggregate nanostructures can be increased in the weak plasmon–exciton coupling
regime and strongly quenched in the strong coupling regime. A theoretical model based on the transfer-matrix
method qualitatively confirms the experimental results obtained from polarization-dependent spectroscopic
reflection measurements
Direct imaging of localized surface plasmon polaritons
Cataloged from PDF version of article.In this Letter, we report on dark field imaging of localized surface plasmon polaritons (SPPs) in plasmonic waveguiding bands formed by plasmonic coupled cavities. We image the light scattered from SPPs in the plasmonic cavities excited by a tunable light source. Tuning the excitation wavelength, we measure the localization and dispersion of the plasmonic cavity mode. Dark field imaging has been achieved in the Kretschmann configuration using a supercontinuum white-light laser equipped with an acoustooptic tunable filter. Polarization dependent spectroscopic reflection and dark field imaging measurements are correlated and found to be in agreement with finite-difference time-domain calculations. (C) 2011 Optical Society of Americ
Plexcitonic crystals: a tunable platform for light-matter interactions
Cataloged from PDF version of article.Coupled states of surface plasmon polaritons (SPPs) and excitons are collectively called plexcitons [Nano Lett. 8, 3481 (2008)]. Plexcitonics is an emerging field of research aiming to control light-matter interaction at the nanometer length scale using coupled pairs of surface-plasmons and excitons. Ability to control the interaction between localized excitons and propagating surface-plasmons is important for realization of new photonic devices. In this letter, we report plexcitonic crystals that yield direction-dependent plasmon-exciton coupling. We have fabricated one- and two-dimensional plexcitonic crystals on periodically corrugated silver surfaces, which are loaded with J-aggregate complexes. We show that plasmon-exciton coupling is blocked for some crystal directions when exciton energy falls inside the plasmonic band gap of the periodically corrugated metallic surface. (C) 2014 Optical Society of Americ
- …