78 research outputs found
An analysis of factors that influence personal exposure to toluene and xylene in residents of Athens, Greece
BACKGROUND: Personal exposure to pollutants is influenced by various outdoor and indoor sources. The aim of this study was to evaluate the exposure of Athens citizens to toluene and xylene, excluding exposure from active smoking. METHODS: Passive air samplers were used to monitor volunteers, their homes and various urban sites for one year, resulting in 2400 measurements of toluene and xylene levels. Since both indoor and outdoor pollution contribute significantly to human exposure, volunteers were chosen from occupational groups who spend a lot of time in the streets (traffic policemen, bus drivers and postmen), and from groups who spend more time indoors (teachers and students). Data on individual and house characteristics were obtained using a questionnaire completed at the beginning of the study; a time-location-activity diary was also completed daily by the volunteers in each of the six monitoring campaigns. RESULTS: Average personal toluene exposure varied over the six monitoring campaigns from 53 to 80 μg/m(3). Urban and indoor concentrations ranged from 47 – 84 μg/m(3 )and 30 – 51 μg/m(3), respectively. Average personal xylene exposure varied between 56 and 85 μg/m(3 )while urban and indoor concentrations ranged from 53 – 88 μg/m(3 )and 27 – 48 μg/m(3), respectively. Urban pollution, indoor residential concentrations and personal exposures exhibited the same pattern of variation during the measurement periods. This variation among monitoring campaigns might largely be explained by differences in climate parameters, namely wind speed, humidity and amount of sunlight. CONCLUSION: In Athens, Greece, the time spent outdoors in the city center during work or leisure makes a major contribution to exposure to toluene and xylene among non-smoking citizens. Indoor pollution and means of transportation contribute significantly to individual exposure levels. Other indoor residential characteristics such as recent painting and mode of heating used might also contribute significantly to individual levels. Groups who may be subject to higher exposures (e.g. those who spent more time outdoors because of occupational activities) need to be surveyed and protected against possible adverse health effects
Biodiesel emissions profile in modern diesel vehicles. Part 1: Effect of biodiesel origin on the criteria emissions
This paper presents the regulated emissions profile of a Euro 4 compliant common rail passenger car, fuelled with low concentration biodiesel blends. Four biodiesels of different origin and quality blended with a typical automotive diesel fuel at proportions of 10, 20, and 30% v/v. Emission and fuel consumption measurements were conducted on a chassis dynamometer with constant volume sampling (CVS) technique, over the New European Driving Cycle (NEDC) and the real traffic-based Artemis driving cycles. Limited effects were observed on CO2 emissions, while fuel consumption marginally increased with biodiesel. PM, HC and CO emissions improved with the addition of biodiesel, with some exceptions. Some increases with biodiesel were observed over the NEDC, as a consequence of biodiesel characteristics and engine conditions. NOx emissions were increased with the use of biodiesel blends and positively correlated with fuel unsaturation levels. © 2011 Elsevier B.V
Influence of oxidized biodiesel blends on regulated and unregulated emissions from a diesel passenger car
Light vehicle regulated and unregulated emissions from different biodiesels
In this study, the regulated and unregulated emissions profile and fuel consumption of an automotive diesel and biodiesel blends, prepared from two different biodiesels, were investigated. The biodiesels were a rapeseed methyl ester (RME) and a palm-based methyl ester (PME). The tests were performed on a chassis dynamometer with constant volume sampling (CVS) over the New European Driving Cycle (NEDC) and the non-legislated Athens Driving Cycle (ADC), using a Euro 2 compliant passenger vehicle. The objectives were to evaluate the impact of biodiesel chemical structure on the emissions, as well as the influence of the applied driving cycle on the formation of exhaust emissions and fuel consumption. The results showed that NOx emissions were influenced by certain biodiesel properties, such as those of cetane number and iodine number. NOx emissions followed a decreasing trend over both cycles, where the most beneficial reduction was obtained with the application of the more saturated biodiesel. PM emissions were decreased with the palm-based biodiesel blends over both cycles, with the exception of the 20% blend which was higher compared to diesel fuel. PME blends led to increases in PM emissions over the ADC. The majority of the biodiesel blends showed a tendency for lower CO and HC emissions. The differences in CO2 emissions were not statistically significant. Fuel consumption presented an increase with both biodiesels. Total PAH and nitro-PAH emission levels were decreased with the use of biodiesel independently of the source material. Lower molecular weight PAHs were predominant in both gaseous and particulate phases. Both biodiesels had a negative impact on certain carbonyl emissions. Formaldehyde and acetaldehyde were the dominant aldehydes emitted from both fuels. © 2009 Elsevier B.V. All rights reserved
Effects of diesel/biodiesel blends on regulated and unregulated pollutants from a passenger vehicle operated over the European and the Athens driving cycles
This paper presents the regulated and unregulated exhaust emissions of a diesel passenger vehicle, operated with low sulphur automotive diesel and soy methyl ester blends. Emission and fuel consumption measurements were conducted under real driving conditions (Athens Driving Cycle, ADC) and compared with those of a modified New European Driving Cycle (NEDC) using a chassis dynamometer. A Euro II compliant diesel vehicle was used in this study, equipped with an indirect injection diesel engine, fuelled with diesel fuel and biodiesel blends at proportions of 5, 10, and 20% respectively. Unregulated emissions of 11 polycyclic aromatic hydrocarbons (PAHs), 5 nitro-PAHs, 13 carbonyl compounds (CBCs) and the soluble organic fraction (SOF) of the particulate matter were measured. Qualitative hydrocarbon analysis was also performed on the SOF. Regulated emissions of NOx, CO, HC, CO2, and PM were also measured over the two test cycles. It was established that some of the emissions measured over the (hot-start) NEDC differed from the real-world cycle. Significant differences were also observed in the vehicle's fuel consumption between the two test cycles. The addition of biodiesel reduced the regulated emissions of CO, HC and PM, while an increase in NOx was observed over the ADC. Carbonyl emissions, PAHs and nitro-PAHs were reduced with the addition of biodiesel over both driving cycles. © 2008 Elsevier Ltd. All rights reserved
Biodiesel emissions profile in modern diesel vehicles. Part 1: Effect of biodiesel origin on the criteria emissions
Influence of oxidized biodiesel blends on regulated and unregulated emissions from a diesel passenger car
This paper investigates the effects of biodiesel blends on regulated and unregulated emissions from a Euro 4 diesel passenger car, fitted with a diesel oxidation catalyst and a diesel particle filter (DPF). Emission and fuel consumption measurements were conducted for the New European Driving Cycle (NEDC) and the Artemis driving cycles. Criteria pollutants, along with carbonyl, polycyclic aromatic hydrocarbon (PAH) and nitrate PAH and oxygenate PAH emissions, were measured and recorded. A soy-based biodiesel and an oxidized biodiesel, obtained from used frying oils, were blended with an ultra low sulfur diesel at proportions of 20, 30, and 50% by volume. The results showed that the DPF had the ability to significantly reduce particulate matter (PM) emissions over all driving conditions. Carbon monoxide (CO) and hydrocarbon (HC) emissions were also reduced with biodiesel; however, a notable increase in nitrogen oxide (NOx) emissions was observed with biodiesel blends. Carbon dioxide (CO2) emissions and fuel consumption followed similar patterns and increased with biodiesel. The influence of fuel type and properties was particularly noticeable on the unregulated pollutants. The use of the oxidized biodiesel blends led to significant increases in carbonyl emissions, especially in compounds which are associated with potential health risks such as formaldehyde, acetaldehyde, and acrolein. Sharp increases in most PAH compounds and especially those which are known for their toxic and carcinogenic potency were observed with the oxidized blends. The presence of polymerization products and cyclic acids were the main factors that influenced the PAH emissions profile. © 2010 American Chemical Society
An experimental study on the impact of biodiesel origin and type on the exhaust emissions from a Euro 4 pick-up truck
Effects of diesel/biodiesel blends on regulated and unregulated pollutants from a passenger vehicle operated over the European and the Athens driving cycles
This paper presents the regulated and unregulated exhaust emissions of a diesel passenger vehicle, operated with low sulphur automotive diesel and soy methyl ester blends. Emission and fuel consumption measurements were conducted under real driving conditions (Athens Driving Cycle, ADC) and compared with those of a modified New European Driving Cycle (NEDC) using a chassis dynamometer. A Euro II compliant diesel vehicle was used in this study, equipped with an indirect injection diesel engine, fuelled with diesel fuel and biodiesel blends at proportions of 5, 10, and 20% respectively. Unregulated emissions of 11 polycyclic aromatic hydrocarbons (PAHs), 5 nitro-PAHs, 13 carbonyl compounds (CBCs) and the soluble organic fraction (SOF) of the particulate matter were measured. Qualitative hydrocarbon analysis was also performed on the SOF. Regulated emissions of NOx, CO, HC, CO2, and PM were also measured over the two test cycles. It was established that some of the emissions measured over the (hot-start) NEDC differed from the real-world cycle. Significant differences were also observed in the vehicle's fuel consumption between the two test cycles. The addition of biodiesel reduced the regulated emissions of CO, HC and PM, while an increase in NOx was observed over the ADC. Carbonyl emissions, PAHs and nitro-PAHs were reduced with the addition of biodiesel over both driving cycles. © 2008 Elsevier Ltd. All rights reserved
An experimental study on the impact of biodiesel origin and type on the exhaust emissions from a Euro 4 pick-up truck
This study investigates the impact of mid-high biodiesel blends on the criteria and PAH emissions from a modern pick-up diesel vehicle. The vehicle was a Euro 4 (category N1, subclass III) compliant common rail light duty goods pick-up truck fitted with a diesel oxidation catalyst. Emission and fuel consumption measurements were performed on a chassis dynamometer equipped with CVS, following the European regulations. All measurements were conducted over the certification New European Driving Cycle (NEDC) and the real traffic-based Artemis driving cycles. Aiming to evaluate the fuel impact on emissions, a soy-based biodiesel, a palm-based biodiesel, and an oxidized biodiesel obtained from used frying oils were blended with a typical utomotive ultra low sulphur diesel at proportions of 30, 50 and 80% by volume. The experimental results revealed that CO2 emissions and fuel consumption exhibited an increase with biodiesel over all driving conditions. NOxemissions were found to be above the Euro 4 limit and increased with biodiesel except the blends prepared with the palm-based methyl ester. In general, the emissions of PM, HC, and CO decreased with the addition of biodiesel; however, some increases were observed over the NEDC which may be attributed to the cold-start conditions during the first phase of the cycle, along with certain physicochemical characteristics of biodiesel. Regarding the unregulated emissions, the results showed that the application of biodiesel may negatively affected the toxicological characteristics of diesel particulate matter due to potential increases of certain toxic compounds in its composition. Sharp increases in most PAH, nitro-PAH and oxy-PAH compounds were observed with the application of biodiesel. These increases were particularly noticeable with the use of the oxidized blends, a phenomenon that it is related with the type and quality of this fuel. The emissions were also affected by the operating conditions of the engine. It was found that most PAH compounds were decreased as the mean speed and load of the driving cycle increased. © 2010 SAE International
- …