6 research outputs found
Geometry Defeaturing Effects in CFD Model-Based Assessment of an Open-Channel-Type UV Wastewater Disinfection System
Computational fluid dynamics (CFD) is a popular tool in the water industry for assessing ultraviolet (UV) reactor performance. However, due to the size of open-channel-type UV reactor systems, the CFD model requires significant computational time. Thus, most evaluations have been conducted using very simplified models. In order to ensure the reliability of this simplified CFD model, precise numerical modeling and validation by measurements are necessary considering the geometry defeaturing level. Therefore, simplified geometries in four defeatured levels were prepared for the CFD model, and simulations were performed to determine the level of geometric simplicity required to derive reliable results. A bioassay test was also conducted for a pilot-scale open-channel-type UV reactor that has the same geometrical configuration as the CFD model. Good agreement was observed between the bioassay test and CFD model results. It was found that the reduction equivalent dose (RED) is not significantly affected by geometry defeaturing under the assumption that the inlet flow conditions are relatively uniform. In multiple bank operation, the addition of banks yields a linear increment of the RED in the CFD model, however, a lower RED than the measured value was presented, especially for serial bank addition. The related aspects of the detailed flow physics and disinfection characteristics were also presented. These results are expected to provide useful information for CFD modeling, reactor design, and the assessment of the open-channel-type UV reactors
Geometry Defeaturing Effects in CFD Model-Based Assessment of an Open-Channel-Type UV Wastewater Disinfection System
Comparative Study of Near-Wall Treatment Methods for Prediction of Heat Transfer over Gas Turbine Nozzle Guide Vane
Recommended from our members
Scalability of carbon-nanotube-based thin film transistors for flexible electronic devices manufactured using an all roll-to-roll gravure printing system.
To demonstrate that roll-to-roll (R2R) gravure printing is a suitable advanced manufacturing method for flexible thin film transistor (TFT)-based electronic circuits, three different nanomaterial-based inks (silver nanoparticles, BaTiO3 nanoparticles and single-walled carbon nanotubes (SWNTs)) were selected and optimized to enable the realization of fully printed SWNT-based TFTs (SWNT-TFTs) on 150-m-long rolls of 0.25-m-wide poly(ethylene terephthalate) (PET). SWNT-TFTs with 5 different channel lengths, namely, 30, 80, 130, 180, and 230 μm, were fabricated using a printing speed of 8 m/min. These SWNT-TFTs were characterized, and the obtained electrical parameters were related to major mechanical factors such as web tension, registration accuracy, impression roll pressure and printing speed to determine whether these mechanical factors were the sources of the observed device-to-device variations. By utilizing the electrical parameters from the SWNT-TFTs, a Monte Carlo simulation for a 1-bit adder circuit, as a reference, was conducted to demonstrate that functional circuits with reasonable complexity can indeed be manufactured using R2R gravure printing. The simulation results suggest that circuits with complexity, similar to the full adder circuit, can be printed with a 76% circuit yield if threshold voltage (Vth) variations of less than 30% can be maintained
Novel Supercapacitor Electrode Derived from One Dimensional Cerium Hydrogen Phosphate (1D-Ce(HPO<sub>4</sub>)<sub>2</sub>.xH<sub>2</sub>O)
In this manuscript, we are reporting for the first time one dimensional (1D) cerium hydrogen phosphate (Ce(HPO4)2.xH2O) electrode material for supercapacitor application. In short, a simple hydrothermal technique was employed to prepare Ce(HPO4)2.xH2O. The maximum surface area of 82 m2 g−1 was obtained from nitrogen sorption isotherm. SEM images revealed Ce(HPO4)2.xH2O exhibited a nanorod-like structure along with particles and clusters. The maximum specific capacitance of 114 F g−1 was achieved at 0.2 A g−1 current density for Ce(HPO4)/NF electrode material in a three-electrode configuration. Furthermore, the fabricated symmetric supercapacitor (SSC) based on Ce(HPO4)2.xH2O//Ce(HPO4)2.xH2O demonstrates reasonable specific energy (2.08 Wh kg−1), moderate specific power (499.88 W kg−1), and outstanding cyclic durability (retains 92.7% of its initial specific capacitance after 5000 GCD cycles)