Palladium (II) Oxide Nanostructures as Promising Materials for Gas Sensors

One of the most important environment monitoring problems is the detection of oxidizing gases in the ambient air. Negative impact of noxious oxidizing gases (ozone and nitrogen oxides) on human health, sensitive vegetation, and ecosystems is very serious. For this reason, palladium (II) oxide nanostructures have been employed for oxidizing gas detection. Thin and ultrathin films of palladium (II) oxide were prepared by thermal oxidation at dry oxygen of previously formed pure palladium layers on polished poly-Al2O3, SiO2/Si (100), optical quality quartz, and amorphous carbon/KCl substrates. At ozone and nitrogen dioxide detection, PdO films prepared by oxidation at T = 870 K have demonstrated good values of sensitivity, signal stability, operation speed, and reproducibility of sensor response. In comparison with other materials, palladium (II) oxide thin and ultrathin films have some advantages at gas sensor fabrication. Firstly, for oxidizing gas detection, PdO films with p-type conductivity are more perspective than the material with n-type conductivity. Secondly, at ambient conditions, palladium (II) oxide is insoluble in water and does not react with it. These facts are favorable for the fabrication of gas detectors because they make possible to minimize the air humidity influence on PdO sensor response values. Thirdly, the synthesis procedure of PdO films is rather simple and is compatible with planar processes of microelectronic industry

Insight into Non Linearly Shaped Superconducting Whiskers via Synchrotron Nanoprobe

We managed to synthesize non-linear YBa2Cu3Ox whiskers, i.e. half loops or kinked shapes, which are promising candidates for solid-state devices based on the intrinsic Josephson effect and with improved electrical connections. We report on a complete characterization of their structural properties via synchrotron nanoprobe as well as laboratory single-crystal diffraction techniques. This investigation allowed us to fully disclose the growth mechanism, which leads to the formation of curved whiskers. The superconducting properties are evaluated in comparison with the straight counterpart, revealing a strong functional analogy and confirming their potential applicability in superconducting electronic devices.Comment: 10 page

Compressive properties of pristine and SiC-Te-added MgB 2 powders, green compacts and spark-plasma-sintered bulks

Pristine and (SiC+Te)-added MgB2 powders, green and spark plasma sintered (SPS) compacts were investigated from the viewpoint of quasi-static and dynamic (Split-Hopkinson Pressure Bar, SHPB) compressive mechanical properties The amount of the additive (SiC+Te) was selected to be the optimum one for maximization of the superconducting functional parameters. Pristine and added MgB2 show very similar compressive parameters (tan δ, fracture strength, Vickers hardness, others) and fragment size in the SHPB test. However, for the bulk SPSed samples the ratio of intergranular to transgranular fracturing changes, the first one being stronger in the added sample. This is reflected in the quasi-static KIC that is higher for the added sample. Despite this result, sintered samples are brittle and have roughly similar fragmentation behavior as for brittle engineering ceramics. In the fragmentation process, the composite nature of our samples should be considered with a special focus on MgB2 blocks (colonies) that show the major contribution to fracturing. The Glenn-Chudnovsky model of fracturing under dynamic load provides the closest values to our experimental fragment size data

Sintered and 3D-Printed Bulks of MgB2-Based Materials with Antimicrobial Properties

Pristine high-density bulk disks of MgB2 with added hexagonal BN (10 wt.%) were prepared using spark plasma sintering. The BN-added samples are machinable by chipping them into desired geometries. Complex shapes of different sizes can also be obtained by the 3D printing of polylactic acid filaments embedded with MgB2 powder particles (10 wt.%). Our present work aims to assess antimicrobial activity quantified as viable cells (CFU/mL) vs. time of sintered and 3D-printed materials. In vitro antimicrobial tests were performed against the bacterial strains Escherichia coli ATCC 25922, Pseudomonas aeruginosa ATCC 27853, Staphylococcus aureus ATCC 25923, Enterococcus faecium DSM 13590, and Enterococcus faecalis ATCC 29212; and the yeast strain Candida parapsilosis ATCC 22019. The antimicrobial effects were found to depend on the tested samples and microbes, with E. faecium being the most resistant and E. coli the most susceptible

Beyond superconductivity towards novel biomedical, energy, ecology, and heritage applications of MgB2

Twenty years passed since the discovery of superconductivity in MgB2. Although there is much progress, the use of superconductors, in general, and of MgB2 in particular, remains limited. On the other hand, in the last 10 years MgB2 became a material of great interest for emergent applications, such as propellants, batteries, and catalysis, as a source material to obtain 2D borophene-like materials (e.g. BH borophane), biomedical field (taking advantage of its promising antimicrobial, antitumoral, biodegradable, and biocompatible features), heritage and ecology being the latest trends. These new directions place MgB2 as a material well integrated with nature cycles that can promote the concept of one eco- and health-friendly, with many envisioned practical purposes. This type of material is at the core of a clean and sustainable economy promoting new developments, boosting the older ones (e.g. superconductivity) and minimizing the costs for the transition to new and modern materials and technologies. In this work, we review recent trends and new directions of MgB2 applications and discuss their potential impact

Epitaxial Non <i>c</i>-Axis <i>Twin-Free</i> Bi₂Sr₂CaCu₂O_8+δ Thin Films for Future THz Devices

Thin films of (117) Bi2Sr2Ca2CuO8+&#948; (Bi-2212) were grown by Molecular Organic Chemical Vapor Deposition (MOCVD) on (110) SrTiO3 and (110) LaAlO3 substrates. Substrates were vicinal with off angles up to 20&#176;. Films are 3D epitaxial and X-ray diffraction &#966;-&#968; scans demonstrate that, while the films grown on a flat substrate are composed of twinned grains, the films on vicinal substrate are twin-free. A higher quality is obtained if growth is performed at two temperatures: Growth starts at 550&#8211;600 &#176;C and continues at 700&#8211;750 &#176;C. The twin-free film grown by the two-temperature method shows a zero-resistance critical temperature of 37 and 32 K when the measuring current is applied in-plane parallel and perpendicular to [001] direction of the substrate. Twin-free non c-axis thin films are promising for fabrication of novel planar THz devices