Polarization-dependent wideband metamaterial absorber for ultraviolet to near-infrared spectral range applications

The need for wideband metamaterial absorbers (WBMA) for applications other than sensing and filtering has demanded modifications to the conventional three-layer metal-insulator-metal (MIM) absorber configuration. This modification often results in complex geometries and an increased number of layers requiring complex lithographic processes for fabrication. Here, we show that a metamaterial absorber with rectangular geometry in the simple MIM configuration can provide wideband absorption covering the ultraviolet and near-infrared spectral range. Due to its asymmetric nature, the WBMA is sensitive to the polarization of the incident light and independent of the angle of incidence up to about 45° depending on the polarization of the incident light. The characteristics of the WBMA presented here may be useful for applications such as detectors for wide spectral band applications.publishedVersionPeer reviewe

Passive tunable and polarization-insensitive fan-like metamaterial absorber in the visible spectrum

We numerically study a fan-like metamaterial absorber (FMMA) composed of an Au-TiO2-Au multilayer with a 3-D finite-difference-time-domain method (FDTD) and verify it experimentally. Our proposed design shows high absorbance, >98% numerically, in the visible spectrum, which is due to the excitation of both localized surface plasmons (LSPs) and propagating surface plasmons (PSPs). In particular, the TiO2 dielectric spacer sandwiched between the top fan-like nanopatterned structure and the bottom planar Au-film is identified as playing a crucial role in the spectral response of the FMMA. Its introduction excites the PSP mode, which first enhances the absorbance of the FMMA and subsequently redshifts the spectral absorbance with a further increase in the thickness. Moreover, the proposed FMMA, numerically and experimentally, also shows polarization and angle insensitivity in the visible spectrum under normal and selected oblique incidence. These results offer unique potential in sensing applications and devices requiring selective absorption in the visible spectral region.publishedVersionPeer reviewe

Terahertz Absorber with Graphene Enhanced Polymer Hemispheres Array

We propose an original technique for the fabrication of terahertz (THz) metasurfaces comprising a 3D printed regular array of polymer hemispheres covered with a thin conductive layer. We demonstrate that the deposition of a thin metal layer onto polymer hemispheres suppresses the THz reflectivity to almost zero, while the frequency range of such a suppression can be considerably broadened by enhancing the structure with graphene. Scaling up of the proposed technique makes it possible to tailor the electromagnetic responses of metasurfaces and allows for the fabrication of various components of THz photonics

Outstanding radiation tolerance of supported graphene: Towards 2d sensors for the space millimeter radioastronomy

We experimentally and theoretically investigated the effects of ionizing radiation on a stack of graphene sheets separated by polymethyl methacrylate (PMMA) slabs. The exceptional absorption ability of such a heterostructure in the THz range makes it promising for use in a graphene-based THz bolometer to be deployed in space. A hydrogen/carbon ion beam was used to simulate the action of protons and secondary ions on the device. We showed that the graphene sheets remain intact after irradiation with an intense 290 keV ion beam at the density of 1.5×1012 cm−2 . However, the THz absorption ability of the graphene/PMMA multilayer can be substantially suppressed due to heating damage of the topmost PMMA slabs produced by carbon ions. By contrast, protons do not have this negative effect due to their much longer mean free pass in PMMA. Since the particles’ flux at the geostationary orbit is significantly lower than that used in our experiments, we conclude that it cannot cause tangible damage of the graphene/PMMA based THz absorber. Our numerical simulations reveal that, at the geostationary orbit, the damaging of the graphene/PMMA multilayer due to the ions bombardment is sufficiently lower to affect the performance of the graphene/PMMA multilayer, the main working element of the THz bolometer, which remains unchanged for more than ten years

The Performance of Graphene-Enhanced THz Grating: Impact of the Gold Layer Imperfectness

We report the performance of a graphene-enhanced THz grating fabricated by depositing a gold layer on the femtosecond micromachined SiO2 substrate. The morphology of the gold plated patterned substrate was studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM), while the quality of the chemical vapor deposition (CVD) graphene was evaluated by Raman spectroscopy. The electromagnetic (EM) response of the metasurface comprising the graphene sheet and the gold plated substrate was studied by THz time domain spectroscopy in the 100 GHz–1 THz frequency range. We employed the finite elements method (FEM) to model the metasurface EM response by adjusting the ac conductivity of the gold layer covering the patterned SiO2 substrate to reproduce the measured transmission/reflection spectra. The results of the numerical simulation reveal the impact of the imperfectness of the gold layer on the performance of the THz metasurface. The experimental results are well described in terms of the Drude–Smith model of metal conductivity that takes into account the anisotropic scattering of the carriers in thin metal films

Macro-, micro-and nano-roughness of carbon-based interface with the living cells

Integration of living cells with nonbiological surfaces (substrates) of sensors, scaffolds, and implants implies severe restrictions on the interface quality and properties, which broadly cover all elements of the interaction between the living and artificial systems (materials, surface modifications, drug-eluting coatings, etc.). Substrate materials must support cellular viability, preserve sterility, and at the same time allow real-time analysis and control of cellular activity. We have compared new substrates based on graphene and pyrolytic carbon (PyC) for the cultivation of living cells. These are PyC films of nanometer thickness deposited on SiO2 and black silicon and graphene nanowall films composed of graphene flakes oriented perpendicular to the Si substrate. The structure, morphology, and interface properties of these substrates are analyzed in terms of their biocompatibility. The PyC demonstrates interface biocompatibility, promising for controlling cell proliferation and directional intercellular contact formation while as-grown graphene walls possess high hydrophobicity and poor biocompatibility. By performing experiments with C6 glioma cells we discovered that PyC is a cell-friendly coating that can be used without poly-l-lysine or other biopolymers for controlling cell adhesion. Thus, the opportunity to easily control the physical/chemical properties and nanotopography makes the PyC films a perfect candidate for the development of biosensors and 3D bioscaffolds.Peer reviewe