An intense, slow and cold beam of metastable Ne(3s) ^3P_2 atoms

We employ laser cooling to intensify and cool an atomic beam of metastable Ne(3s) atoms. Using several collimators, a slower and a compressor we achieve a ^{20}Ne^* flux of 6 10^{10} atoms/s in an 0.7 mm diameter beam traveling at 100 m/s, and having longitudinal and transverse temperatures of 25mK and 300microK, respectively. This constitutes the highest flux in a concentrated beam achieved to date with metastable rare gas atoms. We characterize the action of the various cooling stages in terms of their influence on the flux, diameter and divergence of the atomic beam. The brightness and brilliance achieved are 2.1 10^{21} s^{-1} m^{-2} sr^{-1} and 5.0 10^{22} s^{-1} m^{-2} sr^{-1}, respectively, comparable to the highest values reported for alkali-metal beams. Bright beams of the ^{21}Ne and ^{22}Ne isotopes have also been created.Comment: 18 pages, 9 figures, RevTe

Silicon etch rate enhancement by traces of metal

We report the effect of nickel and tungsten contamination on the etch behavior of silicon. This is studied in a molecular beam setup, where silicon is etched by XeF2 and Ar+ ions. The etch process is directly monitored by the SiF4 reaction products which leave the surface. The effect of contamination appears very pronounced after the ion beam is switched off: it leads to a temporary enhancement of the spontaneous etch rate on a time scale of 500 s. With traces of contamination on the order of 0.01 ML, the etch rate may be enhanced by a factor of 2 for W and somewhat less for Ni. It is concluded that the contamination moves into the silicon by diffusion to vacancies created by the Ar+ ions. For 1 keV Ar+ ions the contamination moves to a depth of 25 Å, comparable to the penetration depth of the ions. After etching a 170 Å thick layer, the catalytic effect of contamination is reduced to less than 5%. A simple model, which describes the measured effect of contamination very well, indicates that only 3% of the contamination is removed when a monolayer of silicon is etched away. Besides this catalytic effect there are indications that contamination can also lower the etch rate under certain conditions, because of the formation of silicides. From the measurements no conclusions could be drawn about the underlying mechanism of etch rate enhancement. © 1999 American Vacuum Society

All-Optical Production of a Degenerate Fermi Gas

We achieve degeneracy in a mixture of the two lowest hyperfine states of $^6$Li by direct evaporation in a CO$_2$ laser trap, yielding the first all-optically produced degenerate Fermi gas. More than $10^5$ atoms are confined at temperatures below $4 \mu$K at full trap depth, where the Fermi temperature for each state is $8 \mu$K. This degenerate two-component mixture is ideal for exploring mechanisms of superconductivity ranging from Cooper pairing to Bose condensation of strongly bound pairs.Comment: 4 pgs RevTeX with 2 eps figs, to be published in Phys. Rev. Let

Consequences of digital mammography in population-based breast cancer screening: initial changes and long-term impact on referral rates

Contains fulltext : 89208.pdf (publisher's version ) (Closed access)OBJECTIVES: To investigate the referral pattern after the transition to full-field digital mammography (FFDM) in a population-based breast cancer screening programme. METHODS: Preceding the nationwide digitalisation of the Dutch screening programme, an FFDM feasibility study was conducted. Detection and referral rates for FFDM and screen-film mammography (SFM) were compared for first and subsequent screens. Furthermore, radiological characteristics of referrals in digital screening were assessed. RESULTS: A total of 312,414 screening mammograms were performed (43,913 digital and 268,501 conventional), with 4,473 consecutive referrals (966 following FFDM). Initially the FFDM referral rate peaked, and many false-positive results were noted as a consequence of pseudolesions and increased detection of (benign) microcalcifications. A higher overall referral rate was observed in FFDM screening in both first and subsequent examinations (p < .001), with a significant increase in cancer detection (p = .010). CONCLUSION: As a result of initial inexperience with digital screening images implementing FFDM in a population-based breast cancer screening programme may lead to a strong, but temporary increase in referral. Dedicated training in digital screening for radiographers and screening radiologists is therefore recommended. Referral rates decrease and stabilise (learning curve effect) at a higher level than in conventional screening, yet with significantly enhanced cancer detection.1 september 201

Surface roughness in XeF2 etching of a-Si/c-Si(100)

Single wavelength ellipsometry and at. force microscopy (AFM) were applied in a well-calibrated beam-etching expt. to characterize the dynamics of surface roughening induced by chem. etching of a .apprx.12 nm amorphous Si (a-Si) top layer and the underlying cryst. Si (c-Si) bulk. In both the initial and final phase of etching, where either only a-Si or only c-Si is exposed to the XeF2 flux, we observe a similar evolution of the surface roughness as a function of the XeF2 dose proportional to D(XeF2)b with b~0.2. In the transition region from the pure amorphous to the pure cryst. silicon layer, we observe a strong anomalous increase of the surface roughness proportional to D(XeF2)b with b~1.5. Not only the growth rate of the roughness increases sharply in this phase, also the surface morphol. temporarily changes to a structure that suggests a cusp-like shape. The remaining a-Si patches on the surface act effectively as a capping layer which causes the growth of deep trenches in the c-Si. The ellipsometry data on the roughness are corroborated by the AFM results, by equating the thickness of the rough layer to 6 s, with s the root-mean-square variation of the AFM's distribution function of height differences. In the AFM data, the anomalous behavior is reflected in a too small value of s which again suggests narrow and deep surface features that cannot be tracked by the AFM tip. The final phase morphol. is characterized by an effective increase in surface area by a factor of two, as derived from a simple bilayer model of the reaction layer, using the exptl. etch rate as input. We obtain a local reaction layer thickness of 1.5 monolayer consistent with the 1.7 ML value of Lo et al. [Lo et al., Phys. Rev. B 47, 648 (1993)] that is also independent of surface roughness. [on SciFinder (R)