Eddy-Current Detection Methods for Surface-Breaking Tight Cracks

The eddy-current (EC) NDE method has been in use for quite some time, and efforts have been made to make it a fully quantitative method. To evaluate impedance signals for a given EC inspection system, one has to characterize the system as a whole, including both probes and specimens. In particular, until probes are characterized, the electromagnetic fields cannot be calculated. Naturally, the amount of numerical computation becomes a serious issue during the course of development. It is necessary to choose probes carefully so as to maximize the flaw-characterization capability, while keeping numerical tasks within a reasonable size. Probes that are suitable for quantitative assessment are presumably different in nature from those with maximum detection capability. Among all kinds of existing probes, the simplest characterizable probe is the uniform-field-eddy-current (UFEC) probe. In fact, a series of studies, both theoretical and experimental, were devoted to demonstrating potential capabilities of UFEC probes [1–9]. The present theoretical work is another entry in this series. The numerical procedure developed in this work is limited to the case where cracks are tightly closed. The procedure is nevertheless capable, in principle, of dealing with an arbitrary range of frequencies

Inversion of Eddy Current Signals in a Nonuniform Probe Field

We present a simple analytical method for predicting the eddy current signal (ΔZ) produced by a surface flaw of known dimensions, when interrogated by a probe with spatially varying magnetic field. The model is easily parameterized, and we use it to construct inversion schemes which can extract overall flaw dimensions from multiposition, multifrequency measurements. Our method is a type of Born approximation, in which we assume that the probe’s magnetic field at the mouth of the flaw can be used as a boundary condition on the electromagnetic field solutions inside the flaw. To simplify the calculation we have chosen a “rectangular” 3-dimensional flaw geometry for our model. We describe experimental measurements made with a new broadband probe on a variety of flaws. This probe operates in a frequency range of 200 kHz to 20 MHz and was designed to make the multifrequency measurements necessary for inversion purposes. Since inversion requires knowledge of the probe’s magnetic field shape, we describe experimental methods which determine the interrogating field geometry for any eddy current probe

Thin-Skin Electromagnetic Fields Around Surface-Breaking Cracks in Metals

In situations where the electrical skin depth δ is small compared with a typical crack dimension l, substantial progress has been achieved in recent years in modeling surface electromagnetic fields and the perturbations that are produced in them by surface-breaking flaws [1,2,3]. The development of an unfolding theory at UCL for thin-skin surface fields was based on the approximation that the electric and magnetic field vectors E and H are essentially tangential to the surface of the material in the surface skin. It was motivated by the desire to measure fatigue cracks in ferrous materials used in large-scale steel structures such as offshore oil rigs [2], and the method to which it was applied was the a.c. field measurement technique. Auld et al [4,5] later adapted the unfolding approach in considering thin-skin field models for the eddy current method, and their major concern was with applications to non-ferrous materials used in airframe and aero-engine manufacture. For acfm work, the unfolding theory leads to a surface Laplacian field on both the metal surface and the crack face and information on the crack presence is deduced by measuring perturbations in the surface field. Auld’s model for eddy currents also has a plane Laplacian field on the crack face, but it is assumed that the crack produces no change in the field on the metal surface. Field lines in the unfolded plane for both models are shown schematically in Figure 1(b,c) for the case when the interrogating field is uniform and the crack is semi-circular. Auld’s model has been described as a Born type of approximation from an analogy with wave scattering theory which ignores the scattered field when calculating scattering cross-sections

Probing Colored Particles with Photons, Leptons, and Jets

If pairs of new colored particles are produced at the Large Hadron Collider, determining their quantum numbers, and even discovering them, can be non-trivial. We suggest that valuable information can be obtained by measuring the resonant signals of their near-threshold QCD bound states. If the particles are charged, the resulting signatures include photons and leptons and are sufficiently rich for unambiguously determining their various quantum numbers, including the charge, color representation and spin, and obtaining a precise mass measurement. These signals provide well-motivated benchmark models for resonance searches in the dijet, photon+jet, diphoton and dilepton channels. While these measurements require that the lifetime of the new particles be not too short, the resulting limits, unlike those from direct searches for pair production above threshold, do not depend on the particles' decay modes. These limits may be competitive with more direct searches if the particles decay in an obscure way.Comment: 39 pages, 9 figures; v2: more recent searches include

Deep sequencing-based transcriptome analysis of Plutella xylostella larvae parasitized by Diadegma semiclausum

Background: Parasitoid insects manipulate their hosts' physiology by injecting various factors into their host upon parasitization. Transcriptomic approaches provide a powerful approach to study insect host-parasitoid interactions at the molecular level. In order to investigate the effects of parasitization by an ichneumonid wasp (Diadegma semiclausum) on the host (Plutella xylostella), the larval transcriptome profile was analyzed using a short-read deep sequencing method (Illumina). Symbiotic polydnaviruses (PDVs) associated with ichneumonid parasitoids, known as ichnoviruses, play significant roles in host immune suppression and developmental regulation. In the current study, D. semiclausum ichnovirus (DsIV) genes expressed in P. xylostella were identified and their sequences compared with other reported PDVs. Five of these genes encode proteins of unknown identity, that have not previously been reported

Overlaps Between Autism and Language Impairment: Phenomimicry or Shared Etiology?

Traditionally, autistic spectrum disorder (ASD) and specific language impairment (SLI) are regarded as distinct conditions with separate etiologies. Yet these disorders co-occur at above chance levels, suggesting shared etiology. Simulations, however, show that additive pleiotropic genes cannot account for observed rates of language impairment in relatives, which are higher for probands with SLI than for those with ASD + language impairment. An alternative account is in terms of ‘phenomimicry’, i.e., language impairment in comorbid cases may be a consequence of ASD risk factors, and different from that seen in SLI. However, this cannot explain why molecular genetic studies have found a common risk genotype for ASD and SLI. This paper explores whether nonadditive genetic influences could account for both family and molecular findings. A modified simulation involving G × G interactions obtained levels of comorbidity and rates of impairment in relatives more consistent with observed values. The simulations further suggest that the shape of distributions of phenotypic trait scores for different genotypes may provide evidence of whether a gene is involved in epistasis

Differences between urban and rural hedges in England revealed by a citizen science project

Background: Hedges are oth ecologically and culturally important and are a distinctive feature of the British landscape. However the overall length of hedges across Great Britain is decreasing. Current challenges in studying hedges relate to the dominance of research on rural, as opposed to urban, hedges, and their variability and geographical breadth. To help address these challenges and to educate the public on the importance of hedge habitats for wildlife, in 2010 the Open Air Laboratories (OPAL) programme coordinated a hedge-focused citizen science survey. Results: Results from 2891 surveys were analysed. Woody plant species differed significantly between urban and rural areas. Beech, Holly, Ivy, Laurel, Privet and Yew were more commonly recorded in urban hedges whereas Blackthorn, Bramble, Dog Rose, Elder and Hawthorn were recorded more often in rural hedges. Urban and rural differences were shown for some groups of invertebrates. Ants, earwigs and shieldbugs were recorded more frequently in urban hedges whereas blowflies, caterpillars, harvestmen, other beetles, spiders and weevils were recorded more frequently in rural hedges. Spiders were the most frequently recorded invertebrate across all surveys. The presence of hard surfaces adjacent to the hedge was influential on hedge structure, number and diversity of plant species, amount of food available for wildlife and invertebrate number and diversity. In urban hedges with one adjacent hard surface, the food available for wildlife was significantly reduced and in rural hedges, one adjacent hard surface affected the diversity of invertebrates. Conclusions: This research highlights that urban hedges may be important habitats for wildlife and that hard surfaces may have an impact on both the number and diversity of plant species and the number and diversity of invertebrates. This study demonstrates that citizen science programmes that focus on hedge surveillance can work and have the added benefit of educating the public on the importance of hedgerow habitats

Diversity of Meiofauna from the 9°50′N East Pacific Rise across a Gradient of Hydrothermal Fluid Emissions

Background: We studied the meiofauna community at deep-sea hydrothermal vents along a gradient of vent fluid emissions in the axial summit trought (AST) of the East Pacific Rise 9 degrees 50'N region. The gradient ranged from extreme high temperatures, high sulfide concentrations, and low pH at sulfide chimneys to ambient deep-sea water conditions on bare basalt. We explore meiofauna diversity and abundance, and discuss its possible underlying ecological and evolutionary processes. Methodology/Principal Findings: After sampling in five physico-chemically different habitats, the meiofauna was sorted, counted and classified. Abundances were low at all sites. A total of 52 species were identified at vent habitats. The vent community was dominated by hard substrate generalists that also lived on bare basalt at ambient deep-sea temperature in the axial summit trough (AST generalists). Some vent species were restricted to a specific vent habitat (vent specialists), but others occurred over a wide range of physico-chemical conditions (vent generalists). Additionally, 35 species were only found on cold bare basalt (basalt specialists). At vent sites, species richness and diversity clearly increased with decreasing influence of vent fluid emissions from extreme flow sulfide chimney (no fauna), high flow pompei worm (S: 4-7, H-loge': 0.11-0.45), vigorous flow tubeworm (S: 8-23; H-loge': 0.44-2.00) to low flow mussel habitats (S: 28-31; H-loge': 2.34-2.60). Conclusions/Significance: Our data suggest that with increasing temperature and toxic hydrogen sulfide concentrations and increasing amplitude of variation of these factors, fewer species are able to cope with these extreme conditions. This results in less diverse communities in more extreme habitats. The finding of many species being present at sites with and without vent fluid emissions points to a non endemic deep-sea hydrothermal vent meiofaunal community. This is in contrast to a mostly endemic macrofauna but similar to what is known for meiofauna from shallow-water vents