Electrical transport and percolation in magnetoresistive manganite / insulating oxide composites: case of La0.7Ca0.3MnO3 / Mn3O4

We report the results of electrical resistivity measurements carried out on well-sintered La0.7Ca0.3MnO3 / Mn3O4 composite samples with almost constant composition of the magnetoresistive manganite phase (La0.7Ca0.3MnO3). A percolation threshold (fc) occurs when the La0.7Ca0.3MnO3 volume fraction is ~ 0.19. The dependence of the electrical resistivity as a function of La0.7Ca0.3MnO3 volume fraction (fLCMO) can be described by percolation-like phenomenological equations. Fitting the conducting regime (fLCMO > fc) by the percolation power law returns a critical exponent t value of 2.0 +/- 0.2 at room temperature and 2.6 +/-0.2 at 5 K. The increase of t is ascribed to the influence of the grain boundaries on the electrical conduction process at low temperature.Comment: 7 pages, 3 figures, accepted for publication in Phys. Rev.

Unusual thermoelectric behavior of packed crystalline granular metals

Loosely packed granular materials are intensively studied nowadays. Electrical and thermal transport properties should reflect the granular structure as well as intrinsic properties. We have compacted crystalline $CaAl$ based metallic grains and studied the electrical resistivity and the thermoelectric power as a function of temperature ($T$) from 15 to 300K. Both properties show three regimes as a function of temperature. It should be pointed out : (i) The electrical resistivity continuously decreases between 15 and 235 K (ii) with various dependences, e.g. $\simeq$ $T^{-3/4}$ at low $T$, while (iii) the thermoelectric power (TEP) is positive, (iv) shows a bump near 60K, and (v) presents a rather unusual square root of temperature dependence at low temperature. It is argued that these three regimes indicate a competition between geometric and thermal processes, - for which a theory seems to be missing in the case of TEP. The microchemical analysis results are also reported indicating a complex microstructure inherent to the phase diagram peritectic intricacies of this binary alloy.Comment: to be published in J. Appl. Phys.22 pages, 8 figure

Effect of cation substitutions in Y-type Ba0.5Sr1.5Me2Fe12O22hexaferrites on the magnetic phase transitions

peer reviewedWe investigated the magnetic properties and magnetic phase transition in Y-type Ba0.5Sr1.5NiMgFe12O22 hexaferrite powder prepared by citrate sol-gel spontaneous combustion. The saturation magnetisation value of 32 emu/g at 4.2 K was lowered to 24 emu/g at 300 K. The magnetisations curves did not saturate even at a magnetic field of 50 kOe for both temperatures - 4.2 K and 300 K. A step-like behaviour appeared in the initial magnetisation curve at 4.2 K. A magnetic phase transformation from a spiral magnetic ordering to a conical spin one was observed at 40 K

Magnetic phase transitions in Ba0.5Sr1.5Zn2Fe11.92Al0.08O22hexaferrites

peer reviewedWe report studies on the effect of substituting the magnetic Fe3+ cations with nonmagnetic Al3+ cations in Y-type hexaferrite Ba0.5Sr1.5Zn2Fe11.92Al0.08O22 powders on their magnetic properties and especially on the magnetic phase transitions responsible for observing the magnetoelectric effect. In this research, the Y-type hexaferrite powders were synthesized by citric acid sol-gel auto-combustion. After the auto-combustion process, the precursor powders were annealed at 1170 °C in air to obtain the Y-type hexaferrite materials. The effects of Al substitution on the structural, microstructural properties and phase content were investigated in detail using X-ray powder diffraction and scanning electron microscopy. Hysteresis measurements were performed by a physical-property-measurement-system (PPMS) (Quantum Design) at 4.2 K and at room temperature. Dc-magnetic measurements of the temperature dependence of the magnetization at magnetic fields of 50 Oe, 100 Oe and 500 Oe were used to determine the effect of applying a magnetic field on the temperature of magnetic-phase transitions. We demonstrated that the helical spin state can be modified further by varying the magnetic field

Effect of Ni and Al substitution on the magnetic properties of Y-type hexaferrite Ba0.5Sr1.5Zn0.5Ni1.5Fe11.92Al0.08O22powders

peer reviewedThe effect is reported of substituting the non-magnetic Zn2+ cations with magnetic Ni2+ cations, and of the magnetic Fe3+ cations with non-magnetic Al3+ cations in Ba0.5Sr1.5Zn0.5Ni1.5Fe11.92Al0.08O22 on the resulting magnetic properties. The Y-type hexaferrite powders were synthesized by citric acid sol-gel auto-combustion, followed by appropriate thermal annealing. The saturation magnetization values (Ms ) in a magnetic field of 50 kOe were 36 emu/g and 30 emu/g at 4.2 K and 300 K, respectively. The zero-field-cooled (ZFC) and field-cooled (FC) magnetization vs. temperature (4.2-300 K) were measured in dc magnetic fields of 50 Oe, 100 Oe and 500 Oe. The changes resulting from the dissimilar cationic substitutions were identified and discussed

Unusual resistivity hysteresis in a bulk magnetoresistive ferromagnetic/ferrimagnetic composite (La0.7Ca0.3MnO3/Mn3O4): Role of demagnetization effects

The authors report an intriguing resistivity versus magnetic field dependence in polycrystalline composite samples containing a magnetoresistive manganite (ferromagnetic/conducting La0.7Ca0.3MnO3) and a magnetic manganese oxide (ferrimagnetic/insulating Mn3O4). At 10 K, when the magnetic field is scanned from positive to negative values, the resistance peak occurs at positive magnetic field, instead of zero or negative field as usually observed in polycrystalline manganite samples. The position of the resistance peak agrees well with the cancellation of the internal magnetic field, suggesting that the demagnetization effects are responsible for this behavior. (c) 2007 American Institute of Physics

Enhancement of the power factor of [Bi1.68Ca2O4](RS)[CoO2](1.69) - Ag composites prepared by the spray-drying method

[Bi1.68Ca2O4](RS)[CoO2](1.69) (BCCO) sample and Ag-BCCO composites (with 10, 20 or 30 wt% Ag) have been prepared by the spray-drying technique and uniaxially/isostatically packed. Scanning electron microscopy reveals that the Ag particles are well distributed in the BCCO cobaltite matrix at low Ag contents. The Ag particles have an important effect on densification and grain orientation of the samples, with a direct impact on their electrical conductivity. The electrical conductivity is higher for the uniaxial samples and increases with the Ag content up to 20% in weight, while the Seebeck coefficient is hardly affected. These features induce an improvement of the power factor, reaching a maximum value of 2.2 mu W K-2 cm(-1) at similar to 1050 K for the uniaxial sample with 20 wt% Ag. Our results suggest that the spray-drying technique is a promising method to obtain composites with a well-dispersed secondary phase. (C) 2010 Elsevier Masson SAS. All rights reserved

La0.7Ca0.3MnO3 / Mn3O4 composites: does an insulating secondary phase always enhance the low field magnetoresistance of manganites?

Composites of magnetoresistive La0.7Ca0.3MnO3 (LCMO) with insulating Mn3O4 are useful as a model system because no foreign cation is introduced in the LCMO phase by interdiffusion during the heat treatment. Here we report the magnetotransport properties as a function of sintering temperature Tsinter for a fixed LCMO/Mn3O4 ratio. Decreasing Tsinter from 1250°C to 800°C causes an increase in low field magnetoresistance (LFMR) that correlates with the decrease in crystallite size (CS) of the LCMO phase. When plotting LFMR at (77 K, 0.5 T) vs. 1/CS, we find that the data for the LCMO/Mn3O4 composites sintered between 800°C and 1250°C follow the same trend line as data from the literature for pure LCMO samples with crystallite size > ~25 nm. This differs from the LFMR enhancement observed by many authors in the "usual" manganite composites, i.e., composites where the insulating phase contains cations other than La, Ca or Mn. This difference suggests that diffusion of foreign cations into the grain boundary region is a necessary ingredient for the enhanced LFMR.D09/0

YBa2Cu3O7-δ thick films for magnetic shielding: Electrophoretic deposition from butanol-based suspension

Multilayered YBa2Cu3O7-δ (YBCO) thick films were coated on silver substrates by electrophoretic deposition (EPD) followed by heat treatment. A butanol-based YBCO suspension is used instead of the common acetone-iodine combination. Tests with several dispersing agents reveal that a branched polyethyleneimine (PEI) dispersant develops large positive surface charge on suspended YBCO particles. As a demonstration of the performance of this new suspension formulation, a 12-layer 100 μm-thick YBCO coating was deposited on an Ag tube. The superconducting transition is sharp with onset critical temperature at 92 K. The sample can shield a magnetic field of ~1.3 mT at 77 K, i.e., the best value so far for an YBCO coating on a metallic substrate. © 2013 Elsevier B.V.Department of the Navy Grant N62909-10-1-7152 issued by Office of Naval Research Globa