27 research outputs found
G55.0+0.3: A Highly Evolved Supernova Remnant
Multi-frequency analysis has revealed the presence of a new supernova
remnant, G55.0+0.3, in the Galactic plane. A kinematic distance of 14 kpc has
been measured from HI spectral line data. The faint, clumpy half-shell is
non-thermal and has a physical radius of 70 pc. Using an evolutionary model,
the age of the remnant is estimated to be on the order of one million years,
which exceeds conventional limits by a factor of five. The remnant may be
associated with the nearby pulsar J1932+2020, which has a spin-down age of 1.1
million years. This work implies that the radiative lifetimes of remnants could
be much longer than previously suggested.Comment: 27 pages, 7 figures in 9 files (figures 1 and 2 require 2 files
each), Accepted for publication in The Astrophysical Journal (Jan. 20, 1998
volume
Radio polarimetric imaging of the interstellar medium: magnetic field and diffuse ionized gas structure near the W3/W4/W5/HB3 complex
We have used polarimetric imaging to study the magneto-ionic medium of the
Galaxy, obtaining 1420 MHz images with an angular resolution of 1' over more
than 40 square-degrees of sky around the W3/W4/W5/HB3 HII region/SNR complex in
the Perseus Arm. Features detected in polarization angle are imposed on the
linearly polarized Galactic synchrotron background emission by Faraday rotation
arising in foreground ionized gas having an emission measure as low as 1
cm^{-6} pc. Several new remarkable phenomena have been identified, including:
mottled polarization arising from random fluctuations in a magneto-ionic screen
that we identify with a medium in the Perseus Arm, probably in the vicinity of
the HII regions themselves; depolarization arising from very high rotation
measures (several times 10^3 rad m^{-2}) and rotation measure gradients due to
the dense, turbulent environs of the HII regions; highly ordered features
spanning up to several degrees; and an extended influence of the HII regions
beyond the boundaries defined by earlier observations. In particular, the
effects of an extended, low-density ionized halo around the HII region W4 are
evident, probably an example of the extended HII envelopes postulated as the
origin of weak recombination-line emission detected from the Galactic ridge.
Our polarization observations can be understood if the uniform magnetic field
component in this envelope scales with the square-root of electron density and
is 20 microG at the edge of the depolarized region around W4, although this is
probably an over-estimate since the random field component will have a
significant effect.Comment: 18 pages, 8 figures (7 jpeg and 1 postscript), accepted for
publication in the Astrophysical Journa
The HII Region KR 140: Spontaneous Formation of a High Mass Star
We have used a multiwavelength data set from the Canadian Galactic Plane
Survey (CGPS) to study the Galactic HII region KR 140, both on the scale of the
nebula itself and in the context of the star forming activity in the nearby
W3/W4/W5 complex of molecular clouds and HII regions. From both radio and
infrared data we have found a covering factor of about 0.5 for KR 140 and we
interpret the nebula as a bowl-shaped region viewed close to face on.
Extinction measurements place the region on the near side of its parent
molecular cloud. The nebula is kept ionized by one O8.5 V(e) star, VES 735,
which is less than a few million years old. CO data show that VES 735 has
disrupted much of the original molecular cloud for which the estimated mass and
density are about 5000 and 100 cm, respectively. KR 140 is
isolated from the nearest star forming activity, in W3. Our data suggest that
KR 140 is an example of spontaneous (i.e., non-triggered) formation of,
unusually, a high mass star.Comment: 46 pages; includes 15 figures; accepted by the Ap
A Lamb-wave-based technique for damage detection in composite laminates
This paper presents the application of Lamb waves to inspect damage in composite laminates. The proposed methodology employs a network of transducers that are used to sequentially scan the structure before and after the presence of damage by transmitting and receiving Lamb wave pulses. A damage localization image is reconstructed by analyzing the cross-correlation of the scatter signal envelope with the excitation pulse envelope for each transducer pair. A potential damage area is then reconstructed by superimposing the image observed from each actuator and sensor signal path. Both numerical and experimental case studies are used to verify the proposed methodology for composite laminates. Three-dimensional finite element models with a transducer network consisting of four transducer elements are used in the numerical case studies. The experimental case studies employ a transducer network using four piezoelectric transducers as transmitter elements and a laser vibrometer to measure the response signals at four locations close to the transducers. The results show that the method enables the reliable detection of structural damage with locating inaccuracies of the order of a few millimeters inside as well as outside of an inspection area of 100 x 100 mm².C T Ng and M Veid
A broadband FPGA digital beamformer for the Advanced Focal Array Demonstrator (AFAD)
Broadband Focal Array Beamformers offer the potential to increase the field of view of reflector antennas. Such systems require a processing bandwidth of order 1 GHz and need to beamform tens of polarized beams from over 100 array elements. A number of such systems have been built but none with the bandwidth and number of elements required by the Square Kilometre Array. In this paper we outline the digital beamformer for the Advanced Focal Array Demonstrator being developed at the National Research Council's Dominion Radio Astrophysical Observatory - a system that meets the bandwidth and beam requirements proposed for the Square Kilometre Array.Peer reviewed: YesNRC publication: Ye
Scattering analysis of fundamental anti-symmetric Lamb wave at delaminations in composite laminates
Paper originally presented at the 6th Australasian Congress on Applied Mechanics (ACAM6), 12-15 December 2010, Perth, Western Australia.This study focuses on the three-dimensional (3D) scattering characteristics of the fundamental anti-symmetric (A0) Lamb wave at a delamination in composite laminates. The understanding of the scattering characteristics plays an important role in the application of Lamb wave based damage detection techniques. One critical factor affecting the performance of Lamb wave based damage detection techniques is the angular distribution of the scattered wave amplitudes at the delamination. Analytical solutions for this problem do not exist due to the anisotropic nature and multilayer characteristics of composite laminates. This paper employs a 3D finite element method to analyse the A0 mode Lamb wave scattering characteristics at delaminations. Good agreement is found between the simulations and experimental measurements. Extended parameter studies show that the angular distribution of the scattered wave amplitudes depends on the stacking sequence of the laminates, the damage size to wavelength ratio and the through-thickness location of delamination. The results of these studies provide improved physical insight into the scattering phenomena at a delamination, which can be used to validate and improve the performance of Lamb wave based damage detection methods by selecting transducer locations and excitation frequency. The study also investigates the feasibility of simulating delamination damage by bonding masses to the surface of composite laminates for Lamb wave based damage detection and characterisation methodologies verification. The results suggest that simulating delamination damage by bonded masses requires careful design and is not as straight forward as suggested in the literature.CT Ng, M Veidthttp://www.informit.com.au/products/ProductDetails.aspx?id=ENG_1246&container=engineerin
An Update on the Mechanical and EM Performance of the Composite Dish Verification Antenna (DVA-1) for the SKA
This paper will give an overview of the unique mechanical and optical design of the DVA-1 telescope. The rim supported carbon fibre reflector surfaces are designed to be both low cost and have high performance under wind, gravity, and thermal loads. The shaped offset Gregorian optics offer low and stable side lobes along with a large area at the secondary focus for multiple feeds with no aperture blockage. Telescope performance under ideal conditions as well as performance under gravity, wind, and thermal loads will be compared directly using calculated radiation patterns for each of these operating conditions
Demonstration of a dual-polarized phased-array feed
We describe the design and construction of a dual-polarized phased-array feed (PAF) with the purpose of demonstrating this technology as a means of expanding the instantaneous field-of-view of radio telescopes. The PAF beamformer is calibrated with observations of an unpolarized astronomical radio source, the covariance matrix of all receiver channels is calculated, and the two dominant eigenvectors are then used as beamformer weights. We show measurements demonstrating the capabilities of this instrument as a polarimeter, and confirm that the calibration method does produce orthogonally-polarized beams. These results are then analyzed to show the sensitivity to fluctuations in gain and phase in the multiple parallel receiver chains making up the phased-array feed. We also compare the performance of PAFs that beamform all array elements with PAFs that beamform only co-polarized elements.Peer reviewed: YesNRC publication: Ye