Determination of efficiencies, loss mechanisms, and performance degradation factors in chopper controlled dc vehical motors. Section 2: The time dependent finite element modeling of the electromagnetic field in electrical machines: Methods and applications

The time dependent solution of the magnetic field is introduced as a method for accounting for the variation, in time, of the machine parameters in predicting and analyzing the performance of the electrical machines. The method of time dependent finite element was used in combination with an also time dependent construction of a grid for the air gap region. The Maxwell stress tensor was used to calculate the airgap torque from the magnetic vector potential distribution. Incremental inductances were defined and calculated as functions of time, depending on eddy currents and saturation. The currents in all the machine circuits were calculated in the time domain based on these inductances, which were continuously updated. The method was applied to a chopper controlled DC series motor used for electric vehicle drive, and to a salient pole sychronous motor with damper bars. Simulation results were compared to experimentally obtained ones

Remarks on the extension of the Ricci flow

We present two new conditions to extend the Ricci flow on a compact manifold over a finite time, which are improvements of some known extension theorems.Comment: 9 pages, to appear in Journal of Geometric Analysi

Local light-ray rotation

We present a sheet structure that rotates the local ray direction through an arbitrary angle around the sheet normal. The sheet structure consists of two parallel Dove-prism sheets, each of which flips one component of the local direction of transmitted light rays. Together, the two sheets rotate transmitted light rays around the sheet normal. We show that the direction under which a point light source is seen is given by a Mobius transform. We illustrate some of the properties with movies calculated by ray-tracing software.Comment: 9 pages, 6 figure

Noncontacting device to indicate deflection of turbopump internal rotating parts

Phase 2 (development) which was concluded for the ultrasonic Doppler device and the light-pipe-reflectance device is reported. An ultrasonic Doppler breadboard system was assembled which accurately measured runout in the J-2 LOX pump impeller during operation. The transducer was mounted on the outside of the pump volute using a C-clamp. Vibration was measured by conducting the ultrasonic wave through the volute housing and through the fluid in the volute to the impeller surface. The impeller vibration was also measured accurately using the light-pipe probe mounted in an elastomeric-gland fitting in the pump case. A special epoxy resin developed for cryogenic applications was forced into the end of the fiber-optic probe to retain the fibers. Subsequently, the probe suffered no damage after simultaneous exposure to 2150 psi and 77 F. Preliminary flash X-radiographs were taken of the turbine wheel and the shaft-bearing-seal assembly, using a 2-megavolt X-ray unit. Reasonable resolution and contrast was obtained. A fast-neutron detector was fabricated and sensitivity was measured. The results demonstrated that the technique is feasible for integrated-time measurements requiring, perhaps, 240 revolutions to obtain sufficient exposure at 35,000 rpm. The experimental verification plans are included

Surface-acoustic-wave driven planar light-emitting device

Electroluminescence emission controlled by means of surface acoustic waves (SAWs) in planar light-emitting diodes (pLEDs) is demonstrated. Interdigital transducers for SAW generation were integrated onto pLEDs fabricated following the scheme which we have recently developed. Current-voltage, light-voltage and photoluminescence characteristics are presented at cryogenic temperatures. We argue that this scheme represents a valuable building block for advanced optoelectronic architectures

Noncontacting devices to indicate deflection and vibration of turbopump internal rotating parts

Published report discusses feasibility of ultrasonic techniques; neutron techniques; X-radiography; optical devices; gamma ray devices; and conventional displacement sensors. Use of signal transmitters in place of slip rings indicated possible improvement and will be subject of futher study

Scaling in the Bombay Stock Exchange Index

In this paper we study BSE Index financial time series for fractal and multifractal behaviour. We show that Bombay stock Exchange (BSE)Index time series is mono-fractal and can be represented by a fractional Brownian motion.Comment: 11 pages,3 figure

Division, adjoints, and dualities of bilinear maps

The distributive property can be studied through bilinear maps and various morphisms between these maps. The adjoint-morphisms between bilinear maps establish a complete abelian category with projectives and admits a duality. Thus the adjoint category is not a module category but nevertheless it is suitably familiar. The universal properties have geometric perspectives. For example, products are orthogonal sums. The bilinear division maps are the simple bimaps with respect to nondegenerate adjoint-morphisms. That formalizes the understanding that the atoms of linear geometries are algebraic objects with no zero-divisors. Adjoint-isomorphism coincides with principal isotopism; hence, nonassociative division rings can be studied within this framework. This also corrects an error in an earlier pre-print; see Remark 2.11

The 2nd order renormalization group flow for non-linear sigma models in 2 dimensions

We show that for two dimensional manifolds M with negative Euler characteristic there exists subsets of the space of smooth Riemannian metrics which are invariant and either parabolic or backwards-parabolic for the 2nd order RG flow. We also show that solutions exists globally on these sets. Finally, we establish the existence of an eternal solution that has both a UV and IR limit, and passes through regions where the flow is parabolic and backwards-parabolic

Existence of Ricci flows of incomplete surfaces

We prove a general existence result for instantaneously complete Ricci flows starting at an arbitrary Riemannian surface which may be incomplete and may have unbounded curvature. We give an explicit formula for the maximal existence time, and describe the asymptotic behaviour in most cases.Comment: 20 pages; updated to reflect galley proof correction