Collodial particles at a range of fluid-fluid particles

The study of solid particles residing at fluid-fluid interfaces has become an established area in surface and colloid science recently experiencing a renaissance since around 2000. Particles at interfaces arise in many industrial products and processes like anti-foam formulations, crude oil emulsions, aerated foodstuffs and flotation. Although they act in many ways like traditional surfactant molecules, they offer distinct advantages also and the area is now multi-disciplinary involving research in the fundamental science and potential applications. In this Feature Article, a flavour of some of this interest is given based on recent work from our own group and includes the behaviour of particles at oil-water, air-water, oil-oil, air-oil and water-water interfaces. The materials capable of being prepared by assembling various kinds of particles at fluid interfaces include particle-stabilised emulsions, particle-stabilised aqueous and oil foams, dry liquids, liquid marbles and powdered emulsions

Particles at oil–air surfaces : powdered oil, liquid oil marbles, and oil foam

The type of material stabilized by four kinds of fluorinated particles (sericite and bentonite platelet clays and spherical zinc oxide) in air–oil mixtures has been investigated. It depends on the particle wettability and the degree of shear. Upon vigorous agitation, oil dispersions are formed in all the oils containing relatively large bentonite particles and in oils of relatively low surface tension (γla < 26 mN m⁻¹) like dodecane, 20 cS silicone, and cyclomethicone containing the other fluorinated particles. Particle-stabilized oil foams were obtained in oils having γla > 26 mN m⁻¹ where the advancing air–oil–solid contact angle θ lies between ca. 90° and 120°. Gentle shaking, however, gives oil-in-air liquid marbles with all the oil–particle systems except for cases where θ is <60°. For oils of tension >24 mN m⁻¹ with omniphobic zinc oxide and sericite particles for which advancing θ ≥ 90°, dry oil powders consisting of oil drops in air which do not leak oil could be made upon gentle agitation up to a critical oil:particle ratio (COPR). Above the COPR, catastrophic phase inversion of the dry oil powders to air-in-oil foams was observed. When sheared on a substrate, the dry oil powders containing at least 60 wt % of oil release the encapsulated oil, making these materials attractive formulations in the cosmetic and food industries

Tm3+/Ho3+ codoped tellurite fiber laser

Continuous-wave and Q-switched lasing from a Tm 3+ /Ho 3+ codoped tellurite fiber is reported. An Yb 3+ /Er 3+ -doped silica fiber laser operating at 1.6μm was used as an in-band pump source, exciting the Tm 3+ ions into the F 4 3 level. Energy is then nonradiatively transferred to the upper laser level, the I 7 5 state of Ho 3+ . The laser transition is from the I 7 5 level to the I 8 5 level, and the resulting emission is at 2.1μm . For continuous wave operation, the slope efficiency was 62% and the threshold 0.1W ; the maximum output demonstrated was 0.16W . Mechanical Q switching resulted in a pulse of 0.65μJ energy and 160ns duration at a repetition rate of 19.4kHz

Effective surface dilatational viscosity of highly concentrated particle-laden interfaces

The effective surface dilatational viscosity is calculated of a flat interface separating two immiscible fluids laden with half-immersed monodisperse rigid spherical non-Brownian particles in the limit of high particle concentration. The derivation is based upon the facts that (i) highly concentrated particle arrays in a plane form a hexagonal structure and (ii) the dominant contribution to the viscous dissipation rate arises in the thin gaps between neighboring particles

Preparation of double emulsions using hybrid polymer/silica particles: New pickering emulsifiers with adjustable surface wettability

A facile route for the preparation of water-in-oil-in-water (w/o/w) double emulsions is described for three model oils, namely, n-dodecane, isopropyl myristate, and isononyl isononanoate, using fumed silica particles coated with poly(ethylene imine) (PEI). The surface wettability of such hybrid PEI/silica particles can be systematically adjusted by (i) increasing the adsorbed amount of PEI and (ii) addition of 1-undecanal to the oil phase prior to homogenization. In the absence of this long-chain aldehyde, PEI/silica hybrid particles (PEI/silica mass ratio = 0.50) produce o/w Pickering emulsions in all cases. In the presence of 1-undecanal, this reagent reacts with the primary and secondary amine groups on the PEI chains via Schiff base chemistry, which can render the PEI/silica hybrid particles sufficiently hydrophobic to stabilize w/o Pickering emulsions at 20 °C. Gas chromatography, 1H NMR and X-ray photoelectron spectroscopy provide compelling experimental evidence for this in situ surface reaction, while a significant increase in the water contact angle indicates markedly greater hydrophobic character for the PEI/silica hybrid particles. However, when PEI/silica hybrid particles are prepared using a relatively low adsorbed amount of PEI (PEI/silica mass ratio = 0.075) only o/w Pickering emulsions are obtained, since the extent of surface modification achieved using this Schiff base chemistry is insufficient. Fluorescence microscopy and laser diffraction studies confirm that highly stable w/o/w double emulsions can be achieved for all three model oils. This is achieved by first homogenizing the relatively hydrophobic PEI/silica hybrid particles (PEI/silica mass ratio = 0.50) with an oil containing 3% 1-undecanal to form an initial w/o emulsion, followed by further homogenization using an aqueous dispersion of relatively hydrophilic PEI/silica particles (PEI/silica mass ratio = 0.075). Dye release from the internal aqueous cores into the aqueous continuous phase was monitored by visible absorption spectroscopy. These studies indicate immediate loss of 12-18% dye during the high speed homogenization that is required for double emulsion formation, but no further dye release is observed at 20 °C for at least 15 days thereafter

Saddle-splay modulus of a particle-laden fluid interface

The scaled-particle theory equation of state for the two-dimensional hard-disk fluid on a curved surface is proposed and used to determine the saddle-splay modulus of a particle-laden fluid interface. The resulting contribution to saddle-splay modulus, which is caused by thermal motion of the adsorbed particles, is comparable in magnitude with the saddle-splay modulus of a simple fluid interface.Comment: 10 pages, 2 figure

Stability of bubbles in wax-based oleofoams: decoupling the effects of bulk oleogel rheology and interfacial rheology

Oleofoams are dispersions of gas bubbles in a continuous oil phase and can be stabilized by crystals of fatty acids or waxes adsorbing at the oil-air interface. Because excess crystals in the continuous phase form an oleogel, an effect of the bulk rheology of the continuous phase is also expected. Here, we evaluate the contributions of bulk and interfacial rheology below and above the melting point of a wax forming an oleogel in sunflower oil. We study the dissolution behaviour of single bubbles using microscopy on a temperature-controlled stage. We compare the behaviour of a bubble embedded in an oleofoam, which owes its stability to both bulk and interfacial rheology, to that of a bubble extracted from the oleofoam and resuspended in oil, for which the interfacial dilatational rheology alone provides stability. We find that below the melting point of the wax, bubbles in the oleofoam are stable whereas bubbles that are only coated with wax crystals dissolve. Both systems dissolve when heated above the melting point of the wax. These findings are rationalized through independent bulk rheological measurements of the oleogel at different temperatures, as well as measurements of the dilatational rheological properties of a wax-coated oil-air interface

Emulsification in binary liquids containing colloidal particles: a structure-factor analysis

We present a quantitative confocal-microscopy study of the transient and final microstructure of particle-stabilised emulsions formed via demixing in a binary liquid. To this end, we have developed an image-analysis method that relies on structure factors obtained from discrete Fourier transforms of individual frames in confocal image sequences. Radially averaging the squared modulus of these Fourier transforms before peak fitting allows extraction of dominant length scales over the entire temperature range of the quench. Our procedure even yields information just after droplet nucleation, when the (fluorescence) contrast between the two separating phases is scarcely discernable in the images. We find that our emulsions are stabilised on experimental time scales by interfacial particles and that they are likely to have bimodal droplet-size distributions. We attribute the latter to coalescence together with creaming being the main coarsening mechanism during the late stages of emulsification and we support this claim with (direct) confocal-microscopy observations. In addition, our results imply that the observed droplets emerge from particle-promoted nucleation, possibly followed by a free-growth regime. Finally, we argue that creaming strongly affects droplet growth during the early stages of emulsification. Future investigations could clarify the link between quench conditions and resulting microstructure, paving the way for tailor-made particle-stabilised emulsions from binary liquids.Comment: http://iopscience.iop.org/0953-8984/22/45/455102

Stability of bubbles in wax-based oleofoams: decoupling the effects of bulk oleogel rheology and interfacial rheology

Oleofoams are dispersions of gas bubbles in a continuous oil phase and can be stabilized by crystals of fatty acids or waxes adsorbing at the oil-air interface. Because excess crystals in the continuous phase form an oleogel, an effect of the bulk rheology of the continuous phase is also expected. Here, we evaluate the contributions of bulk and interfacial rheology below and above the melting point of a wax forming an oleogel in sunflower oil. We study the dissolution behaviour of single bubbles using microscopy on a temperature-controlled stage. We compare the behaviour of a bubble embedded in an oleofoam, which owes its stability to both bulk and interfacial rheology, to that of a bubble extracted from the oleofoam and resuspended in oil, for which the interfacial dilatational rheology alone provides stability. We find that below the melting point of the wax, bubbles in the oleofoam are stable whereas bubbles that are only coated with wax crystals dissolve. Both systems dissolve when heated above the melting point of the wax. These findings are rationalized through independent bulk rheological measurements of the oleogel at different temperatures, as well as measurements of the dilatational rheological properties of a wax-coated oil-air interface