156 research outputs found

    Phase chemistry in the Ca-Mn-Sb-O system at 1160-1250 °C

    Full text link
    Phase equilibrium in the Ca-Mn-Sb-O system was studied in air at the temperature range from 1160 to 1250°C and a pseudo-quaternary phase diagram for the system CaO-MnO-Mn2O3-Sb2O5 is presented. The following compounds were discovered: new antimonate Ca 7Sb2O12 with a perovskite-like structure, solid solutions Mn2-xCaxSb2O7 (0 ≤ x ≤ 1.6) with a 3T-weberite structure, and Ca2-xMn xSb2O7 (0 ≤ x ≤ 0.23) with a 2O-weberite structure, as well as solid solutions Ca2Mn1+xSb 1-xO6 with monoclinic (0 ≤ x ≤ 0.67) and orthorhombic (0.75 ≤ x ≤ 1) perovskite structures. The existence of a number of double and ternary oxides and solid solutions on the basis of Sb 5+ and Mn2+, Mn3+, Mn4+ and with mixed manganese valence is confirmed. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

    Hot dense capsule implosion cores produced by z-pinch dynamic hohlraum radiation

    Full text link
    Hot dense capsule implosions driven by z-pinch x-rays have been measured for the first time. A ~220 eV dynamic hohlraum imploded 1.7-2.1 mm diameter gas-filled CH capsules which absorbed up to ~20 kJ of x-rays. Argon tracer atom spectra were used to measure the Te~ 1keV electron temperature and the ne ~ 1-4 x10^23 cm-3 electron density. Spectra from multiple directions provide core symmetry estimates. Computer simulations agree well with the peak compression values of Te, ne, and symmetry, indicating reasonable understanding of the hohlraum and implosion physics.Comment: submitted to Phys. Rev. Let

    Исследование шума вытеснения от несущего винта вертолета в дальнем поле

    Get PDF
    The results of acoustic characteristics of the main rotor, in particular the thickness noise are presented. The influences of geometric and kinematic parameters on the thickness noise are investigated.Приведены результаты исследования влияния геометрических и кинематических параметров несущего винта на его акустические характеристики, в частности на шум вытеснения

    The Megapixel EBCCD: a high-resolution imaging tube sensitive to single photons

    Get PDF
    A hybrid image-intensifier tube, suitable for extremely low-light imaging, has been tested. This device is based on an Electron-Bombarded CCD chip (EBCCD) with 1024×10241024 \times 1024 sensitive pixe ls. The tube, which has a photocathode diameter of 40 mm, is gateable and zoomable, with an image magnification varying from 0.62 to 1.3. The high gain (about 4000 collected electrons per photo electron at the operational voltage of 15 kV) and the relatively low noise (180 electrons per pixel at 10 MHz pixel-readout frequency), allows single-photoelectron signals to be separated from n oise with a signal-to-noise ratio greater than 10. By applying an appropriate threshold on the signal amplitude, the background can almost be eliminated, with a loss of few percent in single-ph otoelectron counting. High inner gain, low noise, single-photoelectron sensitivity, and high spatial resolution make the EBCCD imaging tube a unique device, attractive for many applications in h igh-energy physics, astrophysics, biomedical diagnostics

    A high-resolution tracking hodoscope based on capillary layers filled with liquid scintillator

    Get PDF
    Results are given on tests of a high-resolution tracking hodoscope based on layers of \hbox{26-μ\mum-bore} glass capillaries filled with organic liquid scintillator (1-methylnaphthalene doped with R39). The detector prototype consisted of three 2-mm-thick parallel layers, with surface areas of 2.1×212.1 \times 21~cm2^2. The layers had a centre-to-centre spacing of 6~mm, and were read by an optoelectronic chain comprising two electrostatically focused image intensifiers and an Electron-Bombarded Charge-Coupled Device (EBCCD). Tracks of cosmic-ray particles were recorded and analysed. The observed hit density was 6.6~hits/mm for particles crossing the layers perpendicularly, at a distance of 1~cm from the capillaries' readout end, and 4.2~hits/mm for particles at a distance of 20~cm. A track segment reconstructed in a single layer had an rms residual of \sim~20~μ\mum, and allowed determination of the track position in a neighbouring layer with a precision of \sim~170~μ\mum. This latter value corresponded to an rms angular resolution per layer of about 30~mrad. A comparison is made between capillary layers and silicon microstrip planes

    RESEARCH OF THE THICKNESS NOISE OF MAIN ROTOR IN FAR FIELD

    No full text
    The results of acoustic characteristics of the main rotor, in particular the thickness noise are presented. The influences of geometric and kinematic parameters on the thickness noise are investigated

    RESEARCH OF THE THICKNESS NOISE OF MAIN ROTOR IN FAR FIELD

    No full text
    The results of acoustic characteristics of the main rotor, in particular the thickness noise are presented. The influences of geometric and kinematic parameters on the thickness noise are investigated
    corecore