Translucent perovskite photovoltaics for building integration

Transparent photovoltaics provide diverse levels of average visible transmittance (AVT) along with concurrent light harvesting, making glass façades and windows accessible for photovoltaics. However, improvements in power conversion efficiency (PCE) and aesthetics are required to enhance commercial viability and public acceptance. This work presents the scalable fabrication of efficient micro-patterned translucent perovskite photovoltaics at optical qualities suited for building integration. Optimized laser-scribed transparent areas (25 μm) mitigate detrimental effects on electrical performance, featuring perovskite solar cells with 44% AVT and demonstrating industrial glass quality through neutral color rendering (CRI 97) and only 3% haze. Highlighting scalability, submodules yield PCEs of 9.0% at 32% AVT (4 cm2 aperture area). The transfer to two-terminal perovskite–perovskite tandem solar cells exhibiting PCEs of 17.7% at 12% AVT and 11.1% at 31% AVT demonstrates the first translucent perovskite tandem photovoltaics. Lastly, the novel concept of transmittance gradients with 7% cm−1 absolute change in AVT and 12.0% PCE for submodules is presented, providing a foundation for architectural individualizations

Sn-Pb Mixed Perovskites with Fullerene-Derivative Interlayers for Efficient Four-Terminal All-Perovskite Tandem Solar Cells

Interfacial engineering is the key to high-performance perovskite solar cells (PSCs). While a wide range of fullerene interlayers are investigated for Pb-based counterparts with a bandgap of >1.5 eV, the role of fullerene interlayers is barely investigated in Sn-Pb mixed narrow-bandgap (NBG) PSCs. In this work, two novel solution-processed fullerene derivatives are investigated, namely indene-C60-propionic acid butyl ester and indene-C60-propionic acid hexyl ester (IPH), as the interlayers in NBG PSCs. It is found that the devices with IPH-interlayer show the highest performance with a remarkable short-circuit current density of 30.7 mA cm−2 and a low deficit in open-circuit voltage. The reduction in voltage deficit down to 0.43 V is attributed to reduced non-radiative recombination that the authors attribute to two aspects: 1) a higher conduction band offset of ≈0.2 eV (>0 eV) that hampers charge-carrier-back-transfer recombination; 2) a decrease in trap density at the perovskite/interlayer/C60 interfaces that results in reduced trap-assisted recombination. In addition, incorporating the IPH interlayer enhances charge extraction within the devices that results in considerable enhancement in short-circuit current density. Using a NBG device with an IPH interlayer, a respectable power conversion efficiency of 24.8% is demonstrated in a four-terminal all-perovskite tandem solar cell

Scalable two-terminal all-perovskite tandem solar modules with a 19.1% efficiency

Monolithic all-perovskite tandem photovoltaics promise to combine low-cost and high-efficiency solar energy harvesting with the advantages of all-thin-film technologies. To date, laboratory-scale all-perovskite tandem solar cells have only been fabricated using non-scalable fabrication techniques. In response, this work reports on laser-scribed all-perovskite tandem modules processed exclusively with scalable fabrication methods (blade coating and vacuum deposition), demonstrating power conversion efficiencies up to 19.1% (aperture area, 12.25 cm2; geometric fill factor, 94.7%) and stable power output. Compared to the performance of our spin-coated reference tandem solar cells (efficiency, 23.5%; area, 0.1 cm2), our prototypes demonstrate substantial advances in the technological readiness of all-perovskite tandem photovoltaics. By means of electroluminescence imaging and laser-beam-induced current mapping, we demonstrate the homogeneous current collection in both subcells over the entire module area, which explains low losses (<5%rel) in open-circuit voltage and fill factor for our scalable modules

Synthesis and characterization of Sn‑doped TiO2 flm for antibacterial applications

Simple sol–gel method has been exploited to deposit Sn-doped TiO2 thin flms on glass substrates. The resultant coatings were characterized by X-ray difraction (XRD), UV–visible techniques (UV–Vis), Fourier transform infrared spectroscopy (FTIR), and photoluminescence analysis (PL). The XRD pattern reveals an increase in crystallite size of the prepared samples with the increasing doping concentration. A decrease in doping concentrating resulted in the decrease in bandgap values. The diferent chemical bonds on these flms were identifed from their FTIR spectra. The photoluminescence analysis shows an increase in the emission peak intensity with increasing dopant concentration, and this can be attributed to the efect created due to surface states. The prepared samples were tested as antibacterial agent toward both Gram-positive and Gram-negative bacteria like S.aureus (Staphylococcus aureus) and E.coli (Escherichia coli), respectively. The size of the inhibition zones indicates that the sample shows maximum inhibitory property toward E.coli when compared to S.aureus