Magnetohydrodynamic Enhanced Entry System for Space Transportation (MEESST) as a Key Building Block for Future Exploration Missions

Aside from the launch environment, atmospheric re-entry imposes one of the most demanding environments which a spacecraft can experience. The combination of high spacecraft velocity and the presence of atmospheric particles leads to partially ionised gas forming around the vehicle, which significantly inhibits radio communications, and leads to the generation of high thermal loads on the spacecraft surface. Currently, the latter is solved using expensive, heavy, and often expendable thermal protection systems (TPS). The use of electromagnetic fields to exploit Magnetohydrodynamic (MHD) principles has long been considered as an attractive solution for this problem. By displacing the ionised gas away from the spacecraft, the thermal loads can be reduced, while also opening a magnetic window for radio waves, mitigating the blackout phenomenon. The application of this concept has to date not been possible due to the large magnetic fields required, which would necessitate the use of exceptionally massive and power-hungry copper coils. High Temperature Superconductors (HTS) have now reached industrial maturity. HTS coils can now offer the necessary low weight and compactness required for space applications. The MEESST consortium the has been awarded a grant from the EU Horizon 2020 programme for the development and demonstration of a novel HTS-based re-entry system based with its foundation on MHD principles. The project will first harmonize existing numerical codes, and then design, manufacture, and test a HTS magnet. The study shows that the use of MEESST technology can have a positive impact on the cost-effectiveness and available payload of interplanetary missions

Enabling Elements of Simulations Digital Twins and its Applicability for Information Superiority in Defence Domain

The emerging concept of digital twins is the key enabler for modelling and simulations needs of any future-ready entity. Digital twins enable rapid transformation of requirements into capabilities at much lower costs, compared to conventional methods, through enhancement of modularity and scalability. Elements of a modelling and simulations digital twin are discussed in this paper. These capabilities include, but are not limited to, surrogate modelling, optimization, parallelization, high performance computing, cloud architecture design, etc. These concepts are relevant for the integration of modelling and simulations technologies into a single interface digital twin for rapid prototyping and qualification of engineering systems. Use of these emerging technologies leads to significantly less simulation computation time (reduced from hours/days to seconds or even micro-seconds) compared to the conventional methods. Ease-of-collaboration with all stakeholders, reduced testing time, minimal on-site infrastructure requirements are the key cost-reducing advantages found in this study. Applicability of such intelligent and online digital twins for information superiority to enhance cybersecurity and on-board threat assessment of space-based (defence) services is analysed. The use of these synchronized and interoperable capabilities mitigates both reversible and non-reversible physical and cyber threats to defence space infrastructure

A Magnetohydrodynamic enhanced entry system for space transportation: MEESST

This paper outlines the initial development of a novel magnetohydrodynamic (MHD) plasma control system which aims at mitigating shock-induced heating and the radio-frequency communication blackout typically encountered during (re-)entry into planetary atmospheres. An international consortium comprising universities, SMEs, research institutions, and industry has been formed in order to develop this technology within the MEESST project. The latter is funded by the Future and Emerging Technologies (FET) program of the European Commission’s Horizon 2020 scheme (grant no. 899298). Atmospheric entry imposes one of the harshest environments which a spacecraft can experience. The combination of hypersonic velocities and the rapid compression of atmospheric particles by the spacecraft leads to high-enthalpy, partially ionised gases forming around the vehicle. This inhibits radio communications and induces high thermal loads on the spacecraft surface. For the former problem, spacecraft can sometimes rely on satellite constellations for communicating through the plasma wake and therefore preventing the blackout. On the other hand, expensive, heavy, and non-reusable thermal protection systems (TPS) are needed to dissipate the severe thermal loads. Such TPS can represent up to 30% of an entry vehicles weight, and especially for manned missions they can reduce the cost- efficiency by sacrificing payload mass. Such systems are also prone to failure, putting the lives of astronauts at risk. The use of electromagnetic fields to exploit MHD principles has long been considered as an attractive solution for tackling the problems described above. By pushing the boundary layer of the ionized gas layer away from the spacecraft, the thermal loads can be reduced, while also opening a magnetic window for radio communications and mitigating the blackout phenomenon. The application of this MHD-enabled system has previously not been demonstrated in realistic conditions due to the required large magnetic fields (on the order of Tesla or more), which for conventional technologies would demand exceptionally heavy and power-hungry electromagnets. High-temperature superconductors (HTS) have reached a level of industrial maturity sufficient for them to act as a key enabling technology for this application. Thanks to superior current densities, HTS coils can offer the necessary low weight and compactness required for space applications, with the ability to generate the strong magnetic fields needed for entry purposes. This paper provides an overview of the MEESST project, including its goals, methodology and some preliminary design considerations

A Magnetohydrodynamic enhanced entry system for space transportation: MEESST

This paper outlines the initial development of a novel magnetohydrodynamic (MHD) plasma control system which aims at mitigating shock-induced heating and the radio-frequency communication blackout typically encountered during (re-)entry into planetary atmospheres. An international consortium comprising universities, SMEs, research institutions, and industry has been formed in order to develop this technology within the MEESST project. The latter is funded by the Future and Emerging Technologies (FET) program of the European Commission’s Horizon 2020 scheme (grant no. 899298). Atmospheric entry imposes one of the harshest environments which a spacecraft can experience. The combination of hypersonic velocities and the rapid compression of atmospheric particles by the spacecraft leads to high-enthalpy, partially ionised gases forming around the vehicle. This inhibits radio communications and induces high thermal loads on the spacecraft surface. For the former problem, spacecraft can sometimes rely on satellite constellations for communicating through the plasma wake and therefore preventing the blackout. On the other hand, expensive, heavy, and non-reusable thermal protection systems (TPS) are needed to dissipate the severe thermal loads. Such TPS can represent up to 30% of an entry vehicles weight, and especially for manned missions they can reduce the cost- efficiency by sacrificing payload mass. Such systems are also prone to failure, putting the lives of astronauts at risk. The use of electromagnetic fields to exploit MHD principles has long been considered as an attractive solution for tackling the problems described above. By pushing the boundary layer of the ionized gas layer away from the spacecraft, the thermal loads can be reduced, while also opening a magnetic window for radio communications and mitigating the blackout phenomenon. The application of this MHD-enabled system has previously not been demonstrated in realistic conditions due to the required large magnetic fields (on the order of Tesla or more), which for conventional technologies would demand exceptionally heavy and power-hungry electromagnets. High-temperature superconductors (HTS) have reached a level of industrial maturity sufficient for them to act as a key enabling technology for this application. Thanks to superior current densities, HTS coils can offer the necessary low weight and compactness required for space applications, with the ability to generate the strong magnetic fields needed for entry purposes. This paper provides an overview of the MEESST project, including its goals, methodology and some preliminary design considerations