4 research outputs found
Electrical discharge machining of polycrystalline diamond using copper electrode – finishing condition
Research on machining process of Polycrystalline Diamond (PCD) is becoming important as the material was believed suitable to be used for cutting tools of advanced aeronautical structure. Electrical Discharge Machining (EDM) was regarded as the suitable method to machine PCD due its noncontact process nature. The objective of this research is to determine the influence of several EDM parameter such as sparking current, pulse duration, and pulse interval to the material removal rate and surface roughness of the machined PCD. Instead of significantly influenced the material removal rate, the sparking current was also highly influenced tha surface roughness. Highest material removal rate of approximately 0.005mm3/s was recorded by the EDM process with the highest current used of 5A, and lowest pulse interval of 1µs. The influence of pulse duration is not clearly seen at the lowest pulse interval used. On the other hand, 0.4µm was the lowest surface roughness value obtained in this research indicated by the highest sparking current, highest sparking duration and lowest sparking interval of 5A, 1µs and 1µs respectively
Kritik al-Quran oleh Nasr Hamid Abu Zayd melalui terapan hermeneutics humanistic
Nasr Hamid Abu Zayd dikenali sebagai seorang tokoh yang lantang mengkritik al-Quran pada abad ini. Beliau mempunyai metode yang tersendiri ketika mentafsir al-Quran iaitu mengaplikasi hermeneutik dengan menerapkan elemen humanistic. Artikel ini bertujuan untuk menganalisis elemen humanistic yang dibawa oleh Abu Zayd dalam empat aspek iaitu definisi al-Quran, konsep bahawa wahyu, proses penurunan wahyu dan metode pentafsiran. Empat aspek tersebut dibandingkan secara berterusan dengan al-Quran dan al-Sunnah. Untuk mencapai validity data, artikel yang bersifat kualitatif ini menggunakan metode analisis kandungan yang terdiri daripada karyakarya Abu Zayd sebagai sumber pengumpulan data. Manakala analisis data menggunakan kaedah diskriptif dan perbandingan berterusan. Hasil kajian menunjukkan, elemen humanistic yang telah diterapkan kepada al-Quran telah mencetuskan implikasi terhadap al- Quran, konsep wahyu, tafsiran relatif dan liberalisasi hukum syariah
The influence of injection molding parameter on properties of thermally conductive plastic
Thermally conductive plastic is the composite between metal-plastic material that is becoming popular because if it special characteristic. Injection moulding was regarded as the best process for mass manufacturing of the plastic composite due to its low production cost. The objective of this research is to find the best combination of the injection parameter setting and to find the most significant factor that effect the strength and thermal conductivity of the composite. Several parameter such as the volume percentage of copper powder, nozzle temperature and injection pressure of injection moulding machine were investigated. The analysis was done using Design Expert Software by implementing design of experiment method. From the analysis, the significant effects were determined and mathematical models of only significant effect were established. In order to ensure the validity of the model, confirmation run was done and percentage errors were calculated. It was found that the best combination parameter setting to maximize the value of tensile strength is volume percentage of copper powder of 3.00%, the nozzle temperature of 195oC and the injection pressure of 65%, and the best combination parameter settings to maximize the value of thermal conductivity is volume percentage of copper powder of 7.00%, the nozzle temperature of 195oC and the injection pressure of 65% as recommended
Electrical discharge machining of polycrystalline diamond using copper electrode – finishing condition
Research on machining process of Polycrystalline Diamond (PCD) is becoming important as the material was believed suitable to be used for cutting tools of advanced aeronautical structure. Electrical Discharge Machining (EDM) was regarded as the suitable method to machine PCD due its noncontact process nature. The objective of this research is to determine the influence of several EDM parameter such as sparking current, pulse duration, and pulse interval to the material removal rate and surface roughness of the machined PCD. Instead of significantly influenced the material removal rate, the sparking current was also highly influenced tha surface roughness. Highest material removal rate of approximately 0.005mm3/s was recorded by the EDM process with the highest current used of 5A, and lowest pulse interval of 1µs. The influence of pulse duration is not clearly seen at the lowest pulse interval used. On the other hand, 0.4µm was the lowest surface roughness value obtained in this research indicated by the highest sparking current, highest sparking duration and lowest sparking interval of 5A, 1µs and 1µs respectively