75 research outputs found
Multi-service systems: an enabler of flexible 5G air-interface
Multi-service system is an enabler to flexibly support
diverse communication requirements for the next generation
wireless communications. In such a system, multiple types of
services co-exist in one baseband system with each service having
its optimal frame structure and low out of band emission (OoBE)
waveforms operating on the service frequency band to reduce the
inter-service-band-interference (ISvcBI). In this article, a
framework for multi-service system is established and the
challenges and possible solutions are studied. The multi-service
system implementation in both time and frequency domain is
discussed. Two representative subband filtered multicarrier
(SFMC) waveforms: filtered orthogonal frequency division
multiplexing (F-OFDM) and universal filtered multi-carrier
(UFMC) are considered in this article. Specifically, the design
methodology, criteria, orthogonality conditions and prospective
application scenarios in the context of 5G are discussed. We
consider both single-rate (SR) and multi-rate (MR) signal
processing methods. Compared with the SR system, the MR
system has significantly reduced computational complexity at the
expense of performance loss due to inter-subband-interference
(ISubBI) in MR systems. The ISvcBI and ISubBI in MR systems
are investigated with proposed low-complexity interference
cancelation algorithms to enable the multi-service operation in
low interference level conditions
Channel equalization and interference analysis for uplink Narrowband Internet of Things (NB-IoT)
We derive the uplink system model for In-band and Guard-band narrowband Internet of Things (NB-IoT). The results reveal that the actual channel frequency response (CFR) is not a simple Fourier transform of the channel impulse response, due to sampling rate mismatch between the NB-IoT user and Long Term Evolution (LTE) base station. Consequently, a new channel equalization algorithm is proposed based on the derived effective CFR. In addition, the interference is derived analytically to facilitate the co-existence of NB-IoT and LTE signals. This work provides an example and guidance to support network slicing and service multiplexing in the physical layer
HARQ in relay-assisted transmission for machine type communications
This letter describes the impact of unknown channel access delay on the timeline of the hybrid automatic repeat request (HARQ) process in the 3rd generation partnership project long term evolution (3GPP LTE) system when a relay node (RN) is used for coverage extension of machine type communication (MTC) devices. A solution is also proposed for the determination of unknown channel access delay when the RN operates in the unlicensed spectrum band. The proposed mechanism is expected to help MTC operation in typical coverage holes areas such as smart meters located in the basement of buildings
Single-Rate and Multi-Rate Multi-Service Systems for Next Generation and Beyond Communications
To flexibly support diverse communication requirements (e.g., throughput, latency, massive connection, etc.) for the next generation wireless communications, one viable solution is to divide the system bandwidth into several service subbands, each for a different type of service. In such a multi-service (MS) system, each service has its optimal frame structure while the services are isolated by subband filtering. In this paper, a framework for multi-service (MS) system is established based on subband filtered multi-carrier (SFMC) modulation. We consider both single-rate (SR) and multi-rate (MR) signal processing as two different MS-SFMC implementations, each having different performance and computational complexity. By comparison, the SR system outperforms the MR system in terms of performance while the MR system has a significantly reduced computational complexity than the SR system. Numerical results show the effectiveness of our analysis and the proposed systems. These proposed SR and MR MS-SFMC systems provide guidelines for next generation wireless system frame structure optimization and algorithm design
Filtered OFDM systems, algorithms and performance analysis for 5G and beyond
Filtered orthogonal frequency division multiplexing (F-OFDM) system is a promising waveform for 5G and beyond to enable multi-service system and spectrum efficient network slicing. However, the performance for F-OFDM systems has not been systematically analyzed in literature. In this paper, we first establish a mathematical model for F-OFDM system and derive the conditions to achieve the interference-free one-tap channel equalization. In the practical cases (e.g., insufficient guard interval, asynchronous transmission, etc.), the analytical expressions for inter-symbol-interference (ISI), inter-carrier-interference (ICI) and adjacent-carrier-interference (ACI) are derived, where the last term is considered as one of the key factors for asynchronous transmissions. Based on the framework, an optimal power compensation matrix is derived to make all of the subcarriers having the same ergodic performance. Another key contribution of the paper is that we propose a multi-rate F-OFDM system to enable low complexity low cost communication scenarios such as narrow band Internet of Things (IoT), at the cost of generating inter-subband-interference (ISubBI). Low computational complexity algorithms are proposed to cancel the ISubBI. The result shows that the derived analytical expressions match the simulation results, and the proposed ISubBI cancelation algorithms can significantly save the original F-OFDM complexity (up to 100 times) without significant performance los
Subband filtered multi-carrier systems for multi-service wireless communications
Flexibly supporting multiple services, each with different communication requirements and frame structure, has been identified as one of the most significant and promising characteristics of next generation and beyond wireless communication systems. However, integrating multiple frame structures with different subcarrier spacing in one radio carrier may result in significant inter-service-band-interference (ISBI). In this paper, a framework for multi-service (MS) systems is established based on a subband filtered multi-carrier system. The subband filtering implementations and both asynchronous and generalized synchronous (GS) MS subband filtered multi-carrier (SFMC) systems have been proposed. Based on the GS-MS-SFMC system, the system model with ISBI is derived and a number of properties on ISBI are given. In addition, low-complexity ISBI cancelation algorithms are proposed by precoding the information symbols at the transmitter. For asynchronous MS-SFMC system in the presence of transceiver imperfections, including carrier frequency offset, timing offset, and phase noise, a complete analytical system model is established in terms of desired signal, inter-symbol-interference, inter-carrier-interference, ISBI, and noise. Thereafter, new channel equalization algorithms are proposed by considering the errors and imperfections. Numerical analysis shows that the analytical results match the simulation results, and the proposed ISBI cancelation and equalization algorithms can significantly improve the system performance in comparison with the existing algorithms
Multi-service Signal Multiplexing and Isolation for Physical-Layer Network Slicing (PNS)
Network slicing has been identified as one of the most important features for 5G and beyond to enable operators to utilize networks on an as-a-service basis and meet the wide range of use cases. In physical layer, the frequency and time resources are split into slices to cater for the services with individual optimal designs, resulting in services/slices having different baseband numerologies (e.g., subcarrier spacing) and / or radio frequency (RF) front-end configurations. In such a system, the multi-service signal multiplexing and isolation among the service/slices are critical for the Physical-Layer Network Slicing (PNS) since orthogonality is destroyed and significant inter-service/ slice-band-interference (ISBI) may be generated. In this paper, we first categorize four PNS cases according to the baseband and RF configurations among the slices. The system model is established by considering a low out of band emission (OoBE) waveform operating in the service/slice frequency band to mitigate the ISBI. The desired signal and interference for the two slices are derived. Consequently, one-tap channel equalization algorithms are proposed based on the derived model. The developed system models establish a framework for further interference analysis, ISBI cancelation algorithms, system design and parameter selection (e.g., guard band), to enable spectrum efficient network slicing
Analysis of Candidate Waveforms for 5G Cellular Systems
Choice of a suitable waveform is a key factor in the design of 5G physical layer. New waveform/s must be capable of supporting a greater density of users, higher data throughput and should provide more efficient utilization of available spectrum to support 5G vision of “everything everywhere and always connected” with “perception of infinite capacity”. Although orthogonal frequency division multiplexing (OFDM) has been adopted as the transmission waveform in wired and wireless systems for years, it has several limitations that make it unsuitable for use in future 5G air interface. In this chapter, we investigate and analyse alternative waveforms that are promising candidate solutions to address the challenges of diverse applications and scenarios in 5G
DepTSol: An Improved Deep-Learning- and Time-of-Flight-Based Real-Time Social Distance Monitoring Approach under Various Low-Light Conditions
- …