634 research outputs found
Stripes: Why hole rich lines are antiphase domain walls?
For stripes of hole rich lines in doped antiferromagnets, we investigate the
competition between anti-phase and in-phase domain wall ground state
configurations. We argue that a phase transition must occure as a function of
the electron/hole filling fraction of the domain wall. Due to {\em transverse}
kinetic hole fluctuations, empty domain walls are always anti-phase. At
arbitrary electron filling fraction () of the domain wall (and in
particular for as in LaNdSrCuO), it is essential to
account also for the transverse magnetic interactions of the electrons and
their mobility {\em along} the domain wall.
We find that the transition from anti-phase to in-phase stripe domain wall
occurs at a critical filling fraction , for any value of
. We further use our model to estimate the spin-wave
velocity in a stripe system. Finally, relate the results of our microscopic
model to previous Landau theory approach to stripes.Comment: 11 pages, 3 figure
Evolution of Broader Impacts
This work is supported by the National Science Foundation under grant number OIA-1810732 and MCB-1940655, the Kavli Foundation and the Burroughs Wellcome Fund. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation, the Kavli Foundation or Burroughs Wellcome Fund
Identifying the components of the solid–electrolyte interphase in Li-ion batteries
The importance of the solid–electrolyte interphase (SEI) for reversible operation of Li-ion batteries has been well established, but the understanding of its chemistry remains incomplete. The current consensus on the identity of the major organic SEI component is that it consists of lithium ethylene di-carbonate (LEDC), which is thought to have high Li-ion conductivity, but low electronic conductivity (to protect the Li/C electrode). Here, we report on the synthesis and structural and spectroscopic characterizations of authentic LEDC and lithium ethylene mono-carbonate (LEMC). Direct comparisons of the SEI grown on graphite anodes suggest that LEMC, instead of LEDC, is likely to be the major SEI component. Single-crystal X-ray diffraction studies on LEMC and lithium methyl carbonate (LMC) reveal unusual layered structures and Li+ coordination environments. LEMC has Li+ conductivities of >1 × 10−6 S cm−1, while LEDC is almost an ionic insulator. The complex interconversions and equilibria of LMC, LEMC and LEDC in dimethyl sulfoxide solutions are also investigated
Prognostic factors in 264 adults with invasive Scedosporium spp. and Lomentospora prolificans infection reported in the literature and FungiScope
Invasive Scedosporium spp. and Lomentospora prolificans infections are an emerging threat in
immunocompromised and occasionally in healthy hosts. Scedosporium spp. is intrinsically resistant
to most, L. prolificans to all the antifungal drugs currently approved, raising concerns about
appropriate treatment decisions. High mortality rates of up to 90% underline the need for comprehensive
diagnostic workup and even more for new, effective antifungal drugs to improve
patient outcome. For a comprehensive analysis, we identified cases of severe Scedosporium spp.
and L. prolificans infections from the literature diagnosed in 2000 or later and the FungiScopeVR
registry. For 208 Scedosporium spp. infections solid organ transplantation (n¼58, 27.9%) and for
56 L. prolificans infection underlying malignancy (n¼28, 50.0%) were the most prevalent risk factors.
L. prolificans infections frequently presented as fungemia (n¼26, 46.4% versus n¼12, 5.8%
for Scedosporium spp.). Malignancy, fungemia, CNS and lung involvement predicted worse outcome
for scedosporiosis and lomentosporiosis. Patients treated with voriconazole had a better
overall outcome in both groups compared to treatment with amphotericin B formulations. This
review discusses the epidemiology, prognostic factors, pathogen susceptibility to approved and
investigational antifungals, and treatment strategies of severe infections caused by Scedosporium
spp. and L. prolificans
Allylic ionic liquid electrolyte-assisted electrochemical surface passivation of LiCoO2 for advanced, safe lithium-ion batteries
Room-temperature ionic liquid (RTIL) electrolytes have attracted much attention for use in advanced, safe lithium-ion batteries (LIB) owing to their nonvolatility, high conductivity, and great thermal stability. However, LIBs containing RTIL-electrolytes exhibit poor cyclability because electrochemical side reactions cause problematic surface failures of the cathode. Here, we demonstrate that a thin, homogeneous surface film, which is electrochemically generated on LiCoO2 from an RTIL-electrolyte containing an unsaturated substituent on the cation (1-allyl-1-methylpiperidinium bis(trifluoromethanesulfonyl)imide, AMPip-TFSI), can avert undesired side reactions. The derived surface film comprised of a high amount of organic species from the RTIL cations homogenously covered LiCoO2 with a ,25 nm layer and helped suppress unfavorable thermal reactions as well as electrochemical side reactions. The superior performance of the cell containing the AMPip-TFSI electrolyte was further elucidated by surface, electrochemical, and thermal analyses.open1
Dynamic behaviour of interphases and its implication on high-energy-density cathode materials in lithium-ion batteries
Undesired electrode-electrolyte interactions prevent the use of many high-energy-density cathode materials in practical lithium-ion batteries. Efforts to address their limited service life have predominantly focused on the active electrode materials and electrolytes. Here an advanced three-dimensional chemical and imaging analysis on a model material, the nickel-rich layered lithium transition-metal oxide, reveals the dynamic behaviour of cathode interphases driven by conductive carbon additives (carbon black) in a common nonaqueous electrolyte. Region-of-interest sensitive secondary-ion mass spectrometry shows that a cathode-electrolyte interphase, initially formed on carbon black with no electrochemical bias applied, readily passivates the cathode particles through mutual exchange of surface species. By tuning the interphase thickness, we demonstrate its robustness in suppressing the deterioration of the electrode/electrolyte interface during high-voltage cell operation. Our results provide insights on the formation and evolution of cathode interphases, facilitating development of in situ surface protection on high-energy-density cathode materials in lithium-based batteries.ope
Serum microRNA array analysis identifies miR-140-3p, miR-33b-3p and miR-671-3p as potential osteoarthritis biomarkers involved in metabolic processes.
Background: MicroRNAs (miRNAs) in circulation have emerged as promising biomarkers. In this study, we aimed to identify a circulating miRNA signature for osteoarthritis (OA) patients and in combination with bioinformatics analysis to evaluate the utility of selected differentially expressed miRNAs in the serum as potential OA biomarkers. Methods: Serum samples were collected from 12 primary OA patients, and 12 healthy individuals were screened using the Agilent Human miRNA Microarray platform interrogating 2549 miRNAs. Receiver Operating Characteristic (ROC) curves were constructed to evaluate the diagnostic performance of the deregulated miRNAs. Expression levels of selected miRNAs were validated by quantitative real-time PCR (qRT-PCR) in all serum and in articular cartilage samples from OA patients (n = 12) and healthy individuals (n = 7). Bioinformatics analysis was used to investigate the involved pathways and target genes for the above miRNAs. Results: We identified 279 differentially expressed miRNAs in the serum of OA patients compared to controls. Two hundred and five miRNAs (73.5%) were upregulated and 74 (26.5%) downregulated. ROC analysis revealed that 77 miRNAs had area under the curve (AUC) > 0.8 and p < 0.05. Bioinformatics analysis in the 77 miRNAs revealed that their target genes were involved in multiple signaling pathways associated with OA, among which FoxO, mTOR, Wnt, pI3K/akt, TGF-β signaling pathways, ECM-receptor interaction, and fatty acid biosynthesis. qRT-PCR validation in seven selected out of the 77 miRNAs revealed 3 significantly downregulated miRNAs (hsa-miR-33b-3p, hsa-miR-671-3p, and hsa-miR-140-3p) in the serum of OA patients, which were in silico predicted to be enriched in pathways involved in metabolic processes. Target-gene analysis of hsa-miR-140-3p, hsa-miR-33b-3p, and hsa-miR-671-3p revealed that InsR and IGFR1 were common targets of all three miRNAs, highlighting their involvement in regulation of metabolic processes that contribute to OA pathology. Hsa-miR-140-3p and hsa-miR-671-3p expression levels were consistently downregulated in articular cartilage of OA patients compared to healthy individuals. Conclusions: A serum miRNA signature was established for the first time using high density resolution miR-arrays in OA patients. We identified a three-miRNA signature, hsa-miR-140-3p, hsa-miR-671-3p, and hsa-miR-33b-3p, in the serum of OA patients, predicted to regulate metabolic processes, which could serve as a potential biomarker for the evaluation of OA risk and progression.Peer reviewedFinal Published versio
Fast-charging high-energy lithium-ion batteries via implantation of amorphous silicon nanolayer in edge-plane activated graphite anodes
As fast-charging lithium-ion batteries turn into increasingly important components in forthcoming applications, various strategies have been devoted to the development of high-rate anodes. However, despite vigorous efforts, the low initial Coulombic efficiency and poor volumetric energy density with insufficient electrode conditions remain critical challenges that have to be addressed. Herein, we demonstrate a hybrid anode via incorporation of a uniformly implanted amorphous silicon nanolayer and edge-site-activated graphite. This architecture succeeds in improving lithium ion transport and minimizing initial capacity losses even with increase in energy density. As a result, the hybrid anode exhibits an exceptional initial Coulombic efficiency (93.8%) and predominant fast-charging behavior with industrial electrode conditions. As a result, a full-cell demonstrates a higher energy density (>= 1060 Wh l(-1)) without any trace of lithium plating at a harsh charging current density (10.2 mA cm(-2)) and 1.5 times faster charging than that of conventional graphite
Graphene-Wrapped Sulfur Particles as a Rechargeable Lithium-Sulfur-Battery Cathode Material with High Capacity and Cycling Stability
We report the synthesis of a graphene-sulfur composite material by wrapping
polyethyleneglycol (PEG) coated submicron sulfur particles with mildly oxidized
graphene oxide sheets decorated by carbon black nanoparticles. The PEG and
graphene coating layers are important to accommodating volume expansion of the
coated sulfur particles during discharge, trapping soluble polysulfide
intermediates and rendering the sulfur particles electrically conducting. The
resulting graphene-sulfur composite showed high and stable specific capacities
up to ~600mAh/g over more than 100 cycles, representing a promising cathode
material for rechargeable lithium batteries with high energy density.Comment: published in Nano Letter
- …