22 research outputs found
PERANCANGAN TATA LETAK PADA AREA WAREHOUSE PT SIMATELEX MANUFACTORY BATAM
Simatelex establishes a new factory in Batam, Indonesia. With these conditions, the current problems faced are the accumulation of materials and the accumulation of finished goods that exceed the capacity of the land and the placement of materials that are still messy or mixed. To improve the layout of the material in the warehouse area, this study uses the Activity Relationship Chart and the CRAFT Algorithm method which will produce a form of production facility layout design that regulates production material traffic so that it runs smoothly and minimizes the total cost of material handling. The results show that this method can redesign the layout of the warehouse area to be better than the previous layout at PT Simatelex manufactory batam. Where from the 5 options selected are options B and C, because the flow of the production process has been regulated in accordance with the manufacture of PM3 PRODUCT so that it can reduce the total distance of material handling transfers and can save material handling costs so that layout improvements in the placement of raw parts for the work process are needed. by PT Simatelex Manufactory Batam to reduce transfer distances and reduce the level of material mixing
PERANCANGAN MITIGASI RESIKO HUMAN ERROR AKTIVITAS MAINTENANCE PADA PT BATAM AERO TECHNIC
Potential errors can be avoided by controlling actions when carrying out maintenance with the aim of controlling work being a continuous corrective action. The problem faced by the company is human negligence or human error in the maintenance painting process. The method used is FMEA (Failure Mode and Effect Analysis) by providing an assessment of risk and mitigation plans using QRA. (Quantitative Risk Analysis) covers all activities to identify hazardous events sequentially and the level of risk. The research was conducted on the process of repainting the aircraft body. The purpose of the study was to determine the negligence of technicians or human error in the process of repainting the aircraft body and the factors causing the problem. The results of the study describe that the frequency of failure of the Boeing 737-900 Series painting process with the type of reject dust is 31.25. The results of the FMEA analysis on the failure of the Boeing 737-900 Series painting process with factors caused by human error, namely lack of maintenance and cleaning of work equipment after use has an RPN value of 448
ANALISIS KEPUASAN PELANGGAN TERHADAP JASA ELANG KURIR DI TANJUNG PIAYU
Various courier services located in Tanjung Piayu are Courier Eagle. The provision of this service already has many customers every day, starting from the delivery of basic necessities, clothing, cosmetics, and household furniture. The amount of competition for courier services make the courier eagle have to provide better service to each of its customers so that customers can trust the courier eagle as a competent courier service than other courier services in tanjung piayu. The unexpected problem that is often experienced by the courier eagle as a delivery service for goods to customer is how the delivery hours of goods to customers start from 10 am to 10 pm, making customer satisfaction from courier eagles reduced
PENGUKURAN KINERJA KARYAWAN DENGAN MENGGUNAKAN METODE HUMAN RESOURCE SCORECARD DI PT GANDA NUSANTARA PERSADA
The condition of a company is very dependent on the quality of its human resources. Increasing the company's competitiveness must begin with improviment the quality of existing human resources first. To improve the quality of human resources can be done by increasing work motivation, work discipline and skills training. Before improving the quality of the people, there must first be a performance measurement system to be able to see the existing performance conditions. Performance measurement research conducted at PT. Ganda Nusantara Persada was conducted by applying the Human Resource Scorecard research method. In the Human Resource Scorecard method, research is carried out by processing data that considers the financial perspectif, customer perspectif, internal business process perspectif and growth and learning perspectif. From the output from this research conducted at PT. Ganda Nusantara Persada shows that from the four perspectives, the company's condition is good. However, when viewed from the comparison of the Idel value and the Belief value, there are still significant differences in several indicators, it is necessary to evaluate the existing performance quality
ANALISIS PEMILIHAN SUPPLIER BERAS DI TOKO SEMBAKO GABE
In the face of increasingly rapid market developments, every company must be able to compete globally. This is a challenge for every company, to be able to compete in providing the best for its consumers. In order to produce products that are in accordance with the wishes of consumers and can increase the competitiveness of companies, it is necessary to pay attention to how to procure products and select the right suppliers. Toko Sembako Gabe is one of the SMEs that does not yet have the right supplier to become a rice supplier. This research aims to assist business owners in determining the right rice supplier at Gabe Grocery Stores. This research uses the Analytical Hierarchy Process (AHP) method. The criteria used in this study are quality, price, delivery, flexible and fast response. Based on the criteria and sub-criteria in supplier selection, supplier 1 is the first priority with a weight of 1.080, supplier 3 is the second choice with a weight of 0.695 and supplier 2 is the last choice with a weight of 0.288. Based on the results of this study, the best supplier to be chosen by Toko Sembako Gabe is supplier 1 (Grosir Tiga Brother
PERBAIKAN TATA LETAK PENYIMPANAN BARANG DI GUDANG PT STB
At this moment, garment care product in PT STB warehouse are not optimize as the part is not tidy up without considering part movement frequency, hence fast moving product have to pass several step to pull out. Purpose of this study is to create layout improvement for optimize the placing base on Class Based Storage method with ABC analysis to classify STB product. Step of this study will start from calculate the movement frequency, classify product base on the movement frequency, decide number of storage and propose the layout improvement with considering rack. Result of the study show frequency of the movement, product grouped to class A which is 2 product, class B which is 3 product and C which is 3 product. with this layout design garment warehouse, proposal able to increase the capacity of warehouse, with result that able to provide additional 40 Pallets
ANALISA PERAMALAN PRODUK PALET KAYU DI CV. BAROKAH UTAMA
Forecasting is a method of predicting the future based on a systematic analysis of past and current facts for a certain period of time. To minimize the excess and shortage of production, as well as shortage of raw materials, forecasting is needed. There are a variety of forecasting methods available, each with varying degrees of accuracy and error. The lowest MAD, MSE, and MAPE error values produce the best forecasting results. The goal of this study is to find the best forecasting approach for CV. Barokah Utama. Moving Average, Exponential Smoothing, Holt Exponential Smoothing, Linear Regression, and Trend Projection are the methods used. Based on the MAD, MSE, and MAD values, the Moving Average method with a value of n = 3 was found to be the most suitable method with the lowest error value
ANALISIS HEADLOSS PADA JARINGAN PERPIPAAN DISTRIBUSI AIR BERSIH DI PERKEBUNAN MARINA KOTA BATAM
The rapid population growth will be directly proportional to the need for clean water, so that sooner or later various problems will arise in fulfilling the need for clean water. Marina Plantation, which is located in the city of Batam, is an area where the majority of the population work as gardeners and breeders. The increase in population and the expansion of the plantation area have resulted in a decrease in the burden on the clean water network. In this study the method used is a quantitative method using the Darcy Weisbach calculation formula with the help of Excel software to simplify calculations. Based on the head loss calculation. The technical specifications of the existing pumps are designed only to pump water with a capacity of 4 m3/h with a head of 12 m. To ensure that the existing pumps are no longer able to meet the current water demand. it is necessary to design a pump with a capacity of 10,314 m3/h +30% with a head of 19 m, and further analysis is needed, for example calculating the required pump driving force and the NPSH available in the installation
ANALISIS PENGENDALIAN KUALITAS PRINTING HOUSING TOP MELITA PADA PT LEON TEKNOLOGI GLOBAL
PT Leon Teknologi is a company engaged in the coating or polishing of raw materials for parts and even assy such as spray painting which has several large customers in the city of Batam, HSG TOP Melitta is a customer in the field of spray painting who has just collaborated with PT Leon in 2020 In terms of quality control issues at PT Leon, visual reject is the main contribution, with a reject rate of 3.5% of the total quantity during the last 6 months of production in the spray painting process, such as Crack on, scratch, White/Black dot and Over painting on Housing Top melitta after printing, Factors Causing Defects on Fishbone analysis, namely from scratch From Human Factors, scratch defects are caused by a lack of production operator training which causes inaccurate operator handling and a lack of understanding of the types of product defects that occur in the production process and methods, namely The lack of clarity on work instructions for the spray painting process caused the spray painting process to be inconsistent with operator procedures and finally the material, which is a type of material that is easily scratched, needs to be reviewed for work instructions on the Melitta upper housing. The Crack factor from Crack is likely to occur in mixing paint with thinner which has a ratio of 1 (Paint): 3 (Thinner) and in general some Spray Painting uses a ratio of 1 (Paint) : 1.3 (Thinner) and some experiments use a ratio of paint and thinner the latest so that out of 30 samples no Crack was Foun
ANALISIS KRITERIA KUALITAS VAPE BERDASARKAN PREFERENSI KONSUMEN DI KOTA BATAM
This study was conducted to analyze differences in consumer preferences in determining the quality and attitudes of consumers towards vape attributes in the city of Batam. The research was conducted in Batam Kota sub-district in June 2023. The method in this study uses a survey method with interviews based on a list of questions on a questionnaire. The sample was determined by random sampling method with 168 samples. The analysis used in the research is Chi Square analysis and Fishbein Multi-attribute. Chi Square analysis shows that apart from the comparison between prices below three hundred thousand rupiahs and between three hundred thousand rupiahs to seven hundred and fifty thousand rupiahs there is a difference of 95% confidence level. This means that there are differences in consumer preferences on vape. Multi-attribute Fishbein analysis shows that there are three attributes that get good consideration and two attributes get sufficient consideration in determining the quality of vape. The order of vape attributes from the highest consideration to the lowest consideration in determining vape quality is the availability of spare parts, product design, battery life, brand and price