The antibacterial efficacy of a foam mouthwash and its ability to remove biofilms

Abstract Objectives/Aims To evaluate the antimicrobial activity of a newly developed foam mouthwash containing a modified lactoperoxidase system in vitro. Materials and methods Biofilms of five bacterial species were developed on hydrophobic and hydrophilic surfaces whilst salivary-based biofilm was grown on tooth enamel. Each surface was exposed to the foam mouthwash or saline in vitro. Optical density and scanning electron microscopy (SEM) was used to determine retention of the biofilm following 5 or 30 s exposure time. Results The foam mouthwash was active against biofilms formed by S. aureus, K. rhizophila, M. thailandicus, E. coli, and C. violaceum and eliminated significant amount of biofilm from each surface; immature 4 h biofilm was less resistant than 24 h biofilm. A 30 s rinse showed best performance, with removal of up to 66% of biofilm from the hydrophilic surface. SEM imaging confirmed oral biofilm removal from the enamel surface after a 5 s rinse with the foam mouthwash. Discussion Foam mouthwash demonstrated a significant impact on growing biofilm when compared against saline solution. Growing biofilms were more susceptible to the action of the foam mouthwash, which justifies after-meal use of the mouthwash when traditional dentifrices may not be accessible. Conclusions Foam mouthwash can be a convenient on-the-go format of oral care products that can be used after meals or when needed to reduce the risk of biofilm-associated oral conditions

Transmission electron microscopy of Ca oxide nano- and microcrystals in alpha-tricalcium phosphate prepared by sintering of beta-tricalcium phosphate

Transmission electron microscopy (TEM) and X-ray diffraction (XRD) were used to study the porous and non-porous alpha-tricalcium phosphate (alpha-Ca-3(PO4)(2), alpha-TCP) prepared through a sintering procedure at 1200-1400 degrees C of beta-tricalcium phosphate (beta-Ca-3(PO4)(2), beta-TCP). The interpretation of experimental and calculated X-ray and electron diffraction patterns showed that the final product at 1400 degrees C was primarily alpha-TCP but roughly 3.0-8.0 wt.% of the starting beta-TCP phase and up to 8.0 wt.% of CaO were in the final product. TEM images and electron diffraction patterns showed that the CaO phase - formed by decomposition of TCP - exists as micron-sized areas of various oriented nanocrystals embedded into the bulk alpha-TCP material and also as self-standing spherulite particles of a few microns in size. Surprisingly, formation of CaO from TCP decomposition occurred at temperatures below those predicted from the phase diagram of the CaO-P2O5 system. (C) 2009 Elsevier Ltd. All rights reserved

Phases and Interfaces in the Cr–Fe–Si Ternary System: X-ray Diffraction and Electron Microscopy Study

The ternary Cr-Fe-Si system was investigated with X-ray diffraction, energy dispersive X-ray spectrometry, scanning and transmission electron microscopy, and electron diffraction. Samples melted at 1723 K were examined right after cooling or after annealing at 1073 K for 3 days to determine phases, grain sizes, and interphase interfaces. During annealing, a polymorphic transformation of the tetragonal α-FeSi2 to the orthorhombic β-FeSi2 phase occurs, while CrSi2 retains its hexagonal structure at high-temperature treatment. Thin layers of ε-FeSi with a cubic structure were observed and identified within the CrSi2 grains. Crystallographic orientation relationships are determined at the interphase interfaces. The contributions of lattice mismatch and thermal expansion coefficient misfit to deformation are discussed

Phases and Interfaces in the Cr–Fe–Si Ternary System: X-ray Diffraction and Electron Microscopy Study

The ternary Cr-Fe-Si system was investigated with X-ray diffraction, energy dispersive X-ray spectrometry, scanning and transmission electron microscopy, and electron diffraction. Samples melted at 1723 K were examined right after cooling or after annealing at 1073 K for 3 days to determine phases, grain sizes, and interphase interfaces. During annealing, a polymorphic transformation of the tetragonal α-FeSi2 to the orthorhombic β-FeSi2 phase occurs, while CrSi2 retains its hexagonal structure at high-temperature treatment. Thin layers of ε-FeSi with a cubic structure were observed and identified within the CrSi2 grains. Crystallographic orientation relationships are determined at the interphase interfaces. The contributions of lattice mismatch and thermal expansion coefficient misfit to deformation are discussed

Polymerization Assisted by Upconversion Nanoparticles under NIR Light

Photopolymerization of nanocomposite materials using near infrared light is one of the unique technologies based on the luminescent properties of lanthanide-doped upconversion nanoparticles (UCNPs). We explored the UCNP-triggered radical polymerization both in oligomer bulk and on the nanoparticle surface in aqueous dispersion. Core/shell UCNPs NaYF4:Yb3+ and Tm3+/NaYF4 with emitting lines in the ultraviolet and blue regions were used to activate a photoinitiator. The study of the bulk photopolymerization in an initially homogeneous reaction mixture showed the UCNP redistribution due to gradient density occurring in the volume, which led to formation of UCNP superlattices and spheres “frozen” in a polymer matrix. We also developed a strategy of “grafting from” the surface, providing polymer shell growth directly on the nanoparticles. The photosensitization of the endogenous water-soluble photoinitiator riboflavin by the resonance energy transfer from UCNPs was demonstrated in the course of monomer glycidyl methacrylate polymerization followed by photocrosslinking with poly(ethylene glycol) diacrylate on the nanoparticle surface

Riboflavin Crystals with Extremely High Water Solubility

New insights into the unique biochemical properties of riboflavin (Rf), also known as vitamin B2, are leading to the development of its use not only as a vitamin supplement but also as a potential anti-inflammatory, immunomodulatory, antioxidant, anticancer, and antiviral agent, where it may play a role as an inhibitor of viral proteinases. At the same time, the comparison of the pharmacoactivity of Rf with its known metabolites, namely, flavin mononucleotide (FMN) and flavin adenine dinucleotide (FAD), is very complicated due to its poor water solubility: 0.1–0.3 g/L versus 67 g/L for FMN and 50 g/L for FAD, which is the limiting factor for its administration in clinical practice. In this study, we report the recrystallization procedure of the type A Rf crystals into the slightly hydrophobic type B/C and a new hydrophilic crystal form that has been termed the P type. Our method of Rf crystal modification based on recrystallization from dilute alkaline solution provides an unprecedented extremely high water solubility of Rf, reaching 23.5 g/L. A comprehensive study of the physicochemical properties of type P riboflavin showed increased photodynamic therapeutic activity compared to the known types A and B/C against clinical isolates of Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, and Salmonella typhimurium. Importantly, our work not only demonstrates a simple and inexpensive method for the synthesis of riboflavin with high solubility, which should lead to increased bioactivity, but also opens up opportunities for improving both known and new therapeutic applications of vitamin B2