ESTET – NEW INNOVATIVE SPECIALTY FOR MASTER STUDENTS

Problem. Currently, new educational reforms are intensively being implemented in Ukraine. This is achieved, including, by the development and implementation of new innovative joint training programs. Goal. To improve higher education in accordance with the changing needs of economic and social spheres in the road transport sector due to the growth of innovative energy-efficient and energy-saving technologies. To increase the competitiveness of graduates in employment and the productive cooperation between the universities. To reduce energy consumption and to replace traditional sources by «green» forms of energy in the transport sector as well. Methodology. The analysis of existing joint educational programs for masters was conducted. There was accomplished the analysis and monitoring of the labor market with the determination of its urgent and future needs, taking into account the development of modern electric transport. Results. The project for implementation of the new innovative master’s program in the specialty «Energy-saving technologies in transport» (ESTeT) has been developed. We have proposed the structure of a new specialty. The work packages that address specific tasks in the overall system of the ESTeT project implementation have been briefly described. The division of the new master's specialty into its constituting structural elements has been carried out. Originality. We proposed the new innovative educational joint program for masters ESTeT. Practical value. The implementation of new innovative joint specialties in the field of higher education in Ukraine provides an opportunity to increase the level of Ukrainian higher education itself. This will allow students to acquire the appropriate competencies in the field of study and expand their applications. Also, obtaining two diplomas (Ukrainian and European) by students will significantly expand their employment opportunities

Estimating Dynamic and Flow Characteristics of Electromagnetic Dispenser for The Kraz Truck Converted to Gas

The problems of worldwide environmental degradation, global warming, scarcity of fossil fuels have caused the replacement of ICE vehicles with electric ones. For the countries with underdeveloped economy, it is important to find more affordable ways to solve this problem. One of them is to convert the cars with ICE into more environmentally friendly and economical ones, such as gas-powered cars. Yet, the conversion of diesel cars usually results in power loss. The work of the electromagnetic gas dispenser (EGD) of the engine power supply system significantly affects the efficiency of the gas engine. Therefore, the aim of the study was to determine the dynamic and flow characteristics of the EGD of the KrAZ truck (Ukraine) converted to gas, and to provide recommendations for improving the efficiency of its operation. The object of the research was the working processes of the EGD power supply system of 6ChGN13/14 engine, converted from diesel engine and equipped with a gas turbine supercharger. The paper presents the results of experimental studies on determining the effect of operating voltage on the dynamic characteristics of EGD. The dependences of dynamic and flow characteristics of the EGD on the change of the control signal frequency and the dependence of efficiency through the EGD flow nozzle on the control signal duration were obtained; the effect of the return spring stiffness on the dynamic and flow characteristics of the EGD were determined. The results of the work are designed to increase the efficiency of diesel trucks converted to gas

Estimating Dynamic and Flow Characteristics of Electromagnetic Dispenser for The Kraz Truck Converted to Gas

The problems of worldwide environmental degradation, global warming, scarcity of fossil fuels have caused the replacement of ICE vehicles with electric ones. For the countries with underdeveloped economy, it is important to find more affordable ways to solve this problem. One of them is to convert the cars with ICE into more environmentally friendly and economical ones, such as gas-powered cars. Yet, the conversion of diesel cars usually results in power loss. The work of the electromagnetic gas dispenser (EGD) of the engine power supply system significantly affects the efficiency of the gas engine. Therefore, the aim of the study was to determine the dynamic and flow characteristics of the EGD of the KrAZ truck (Ukraine) converted to gas, and to provide recommendations for improving the efficiency of its operation. The object of the research was the working processes of the EGD power supply system of 6ChGN13/14 engine, converted from diesel engine and equipped with a gas turbine supercharger. The paper presents the results of experimental studies on determining the effect of operating voltage on the dynamic characteristics of EGD. The dependences of dynamic and flow characteristics of the EGD on the change of the control signal frequency and the dependence of efficiency through the EGD flow nozzle on the control signal duration were obtained; the effect of the return spring stiffness on the dynamic and flow characteristics of the EGD were determined. The results of the work are designed to increase the efficiency of diesel trucks converted to gas

ВИЗНАЧЕННЯ НАЙБІЛЬШ ЕФЕКТИВНИХ ТЯГОВИХ ДЖЕРЕЛ СТРУМУ ДЛЯ ЕЛЕКТРОМОБІЛІВ

The analysis of the modern energy storage devices is carried out. It is established that when choosing a traction battery for an electric vehicle, it is necessary to determine the priority of characteristics by which the choice will be made, the operating conditions and what kind of consumer it is intended for. It has been determined that for urban public electric transport, the ultra capacitors should be used as the traction batteries, and for a small city electric vehicle the lithium-ion batteries are preferredПроведен анализ современных накопителей энергии. Определено, что для городского общественного электротранспорта в качестве тяговой аккумуляторной батареи эффективнее использовать ультраконденсаторы, а для малолитражного городского электромобиля – литий-ионные аккумуляторыПроведено аналіз сучасних накопичувачів енергії. Визначено, що для міського громадського електротранспорту як тягову акумуляторну батарею ефективніше використовувати ультраконденсатори, а для малолітражного міського електромобіля – літій-іонні акумулятор

DETERMINATION OF THE MOST EFFECTIVE TRACTION SOURCES OF CURRENT FOR THE ELECTRIC VEHICLES

The analysis of the modern energy storage devices is carried out. It is established that when choosing a traction battery for an electric vehicle, it is necessary to determine the priority of characteristics by which the choice will be made, the operating conditions and what kind of consumer it is intended for. It has been determined that for urban public electric transport, the ultra capacitors should be used as the traction batteries, and for a small city electric vehicle the lithium-ion batteries are preferred

ANALYSIS OF SOLAR POWER STATION SCHEMES ON PHOTOELECTRIC MODULES FOR ELECTRIC CARS CHARGING STATIONS

The analysis of existing schemes for building solar power stations on photoelectric modules with the revealing of their operation principles and functionality has been conducted. The specified technical characteristics of each of the analyzed schemes are given. The structural scheme of the solar charging station for electric cars with determining its functional capabilities and operation features is proposed. The practical application of this scheme will help to reduce the dependence on the general electric power supply network and will create conditions for its total rejection

АНАЛІЗ СХЕМ СОНЯЧНИХ ЕЛЕКТРОСТАНЦІЙ НА ФОТОЕЛЕКТРИЧНИХ МОДУЛЯХ ДЛЯ ЗАРЯДНИХ СТАНЦІЙ ЕЛЕКТРОМОБІЛІВ

The analysis of existing schemes for building solar power stations on photoelectric modules with the revealing of their operation principles and functionality has been conducted. The specified technical characteristics of each of the analyzed schemes are given. The structural scheme of the solar charging station for electric cars with determining its functional capabilities and operation features is proposed. The practical application of this scheme will help to reduce the dependence on the general electric power supply network and will create conditions for its total rejectionПроведен анализ существующих схем построения солнечных электростанций на фотоэлектрических модулях. Раскрыт их принцип работы. Рассмотрены технические характеристики каждой из представленных схем. Предложена схема построения солнечной зарядной станции для электромобилей. Описаны ее функциональные возможности и особенности работыПроведено аналіз існуючих схем будови сонячних електростанцій на фотоелектричних модулях. Розкрито їх принцип роботи. Розглянуто технічні характеристики кожної з поданих схем. Запропоновано схему будови сонячної зарядної станції для електромобілів. Описано її функціональні можливості та особливості робот

Визначення оптимальних параметрів навантаження для ефективної роботи кремнієвих сонячних батарей

Problem. Currently, the most commonly used method is the so-called direct method of converting solar radiation into electric current using a variety of solar batteries (SB). The most widely used in the application were silicon SB. Consequently, the question arises as to which optimal parameters should have an electrical load in order to ensure the efficient operation of SB. Goal. Determination of the optimal active load parameter for monocrystalline and polycrystalline SB, which meets the criterion for transmitting maximum power to load. Methodology. The analytical methods of research on the development and application of methods and devices for transforming the energy of the sun into electricity were used. Experimental methods of research and mathematical methods of processing experimental research were used. Results. The analysis of existing types of silicon SB is carried out, their classification is presented. The determination of the optimal active load parameter for monocrystalline and polycrystalline SB is carried out, which corresponds to the criterion of transfer of maximum power to load. The results of experimental studies are presented as volt-ampere characteristics and the dependence of the power of SB on the load current. An analysis of the results of experimental studies showed that for the most efficient operation of the SB, its active load should be maintained in the range from 3 ohms to 3,5 ohms. Originality. The method for determining the optimal electrical load parameters for silicon monocrystal and polycrystalline SB has been improved. The method of correlation of electric loading of SB to their own active resistance is presented. Practical value. The obtained results allow us to determine the optimal electrical load parameters for silicon monocrystalline and polycrystalline SB. If the types of SB in question are compiled into systems with a corresponding serial-parallel connection, then it is necessary to determine the internal resistance of such a system. Applying this principle, you can determine the optimal load parameters for any silicon solar system.Определены оптимальные параметры активной нагрузки для монокристаллических и поликристаллических солнечных батарей (СБ), соответствующие критерию передачи максимальной мощности в нагрузку. Раскрыта и проанализирована классификация СБ. Результаты экспериментальных исследований представлены в виде вольт-амперных характеристик и зависимости мощности СБ от тока нагрузки. Визначено оптимальні параметри активного навантаження для монокристалічних та полікристалічних сонячних батарей (СБ), що відповідають критерію передачі максимальної потужності в навантаження. Розкрито та проаналізовано класифікацію СБ. Результати експериментальних досліджень подано у вигляді вольт-амперних характеристик та залежності потужності СБ від струму навантаження.

ESTET – НОВА ІННОВАЦІЙНА СПЕЦІАЛЬНІСТЬ ДЛЯ МАГІСТРІВ

Currently, new educational reforms are intensively being implemented in Ukraine. This is achieved, including, by the development and implementation of new innovative joint training programs. Goal. To improve higher education in accordance with the changing needs of economic and social spheres in the road transport sector due to the growth of innovative energy-efficient and energy-saving technologies. To increase the competitiveness of graduates in employment and the productive cooperation between the universities. To reduce energy consumption and to replace traditional sources by «green» forms of energy in the transport sector as well. Methodology. The analysis of existing joint educational programs for masters was conducted. There was accomplished the analysis and monitoring of the labor market with the determination of its urgent and future needs, taking into account the development of modern electric transport. Results. The project for implementation of the new innovative master’s program in the specialty «Energy-saving technologies in transport» (ESTeT) has been developed. We have proposed the structure of a new specialty. The work packages that address specific tasks in the overall system of the ESTeT project implementation have been briefly described. The division of the new master's specialty into its constituting structural elements has been carried out. Originality. We proposed the new innovative educational joint program for masters ESTeT. Practical value. The implementation of new innovative joint specialties in the field of higher education in Ukraine provides an opportunity to increase the level of Ukrainian higher education itself. This will allow students to acquire the appropriate competencies in the field of study and expand their applications. Also, obtaining two diplomas (Ukrainian and European) by students will significantly expand their employment opportunities.На цей час в Україні активно впроваджуються нові освітні реформи. Це досягається, зокрема, шляхом розробки та впровадження нових інноваційних спільних навчальних програм. До того ж, через зростання інноваційних енергоефективних та енергозберігаючих технологій важливо поліпшувати вищу освіту відповідно до змін у потребах економіки та соціальної сфери у секторі автомобільного транспорту, підвищувати конкурентоспроможність випускників у сфері зайнятості, впроваджувати продуктивну співпрацю між університетами. До того ж, енергетичні й екологічні проблеми в Україні змушують знижувати споживання енергії та заміняти традиційні джерела на «зелені» види енергії в усіх сферах життя і діяльності держави, зокрема і в транспортному секторі, що сприяє приєднанню навчального процесу до вирішення цих проблем. Проведено аналіз існуючих спільних освітніх програм для магістрів. Проведено аналіз та моніторинг ринку праці з визначенням його поточніх та майбутніх потреб, з урахуванням розвитку сучасного електричного транспорту. Розроблено проект впровадження нової інноваційної магістерської програми зі спеціальності «Енергозберігаючі технології на транспорті». Запропоновано структуру нової спеціальності. Коротко описані робочі пакети, що стосуються конкретних завдань у загальній системі реалізації проекту «Енергозберігаючі технології на транспорті». Проведено поділ нової спеціальності магістрів на структурні елементи. Реалізація нових інноваційних спільних спеціальностей у сфері вищої освіти в Україні дає можливість підвищити рівень самої вищої освіти України. Це дозволить студентам набути відповідних компетенцій у галузі навчання та розширити їх застосування. Крім того, отримання студентами двох дипломів (українського та європейськиого) значно розширить можливості для працевлаштування

ВЛАСТИВОСТІ ТА СПОСОБИ ЗАСТОСУВАННЯ П’ЄЗОЕЛЕКТРИЧНИХ ЕЛЕМЕНТІВ ЯК ГЕНЕРАТОРІВ ЕЛЕКТРОЕНЕРГІЇ

In the paper the properties of piezoelectric substances are studied and the possibilities of their application as a source of electric energy are analyzed. The characteristics of piezoelectric substances properties are considered and the main analytical connections during their calculation are given. The piezoceramic elements as energy converters with reference to the basic schemes of their application are investigated. The schemes of constructing piezogenerators for the systems and devices of electric power generation are presentedПроведено исследование пьезоэлектрических материалов и анализ возможностей их применения в качестве источника электроэнергии. Рассмотрены их свойства и приведены аналитические соотношения для их расчета. Исследованы пьезокерамические элементы как преобразователи энергии. Представлены схемы их применения и схемы выполнения пьезо­генераторовПроведено дослідження п’єзоелектричних матеріалів та аналіз можливостей їх застосування як джерела електричної енергії. Розглянуто їх властивості, наведено аналітичні співвідношення для їх розрахунку. Досліджено п’єзокерамічні елементи як перетворювачі енергії. Подано схеми їх застосування і схеми виконання п’єзогенераторі