Highly Sensitive and Cost-Effective Portable Sensor for Early Gastric Carcinoma Diagnosis

Facile and efficient early detection of cancer is a major challenge in healthcare. Herein we developed a novel sensor made from a polycarbonate (PC) membrane with nanopores, followed by sequence-specific Oligo RNA modification for early gastric carcinoma diagnosis. In this design, the gastric cancer antigen CA72-4 is specifically conjugated to the Oligo RNA, thereby inhibiting the electrical current through the PC membrane in a concentration-dependent manner. The device can determine the concentration of cancer antigen CA72-4 in the range from 4 to 14 U/mL, possessing a sensitivity of 7.029 µAU−1mLcm−2 with a linear regression (R2) of 0.965 and a lower detection limit of 4 U/mL. This device has integrated advantages including high specificity and sensitivity and being simple, portable, and cost effective, which collectively enables a giant leap for cancer screening technologies towards clinical use. This is the first report to use RNA aptamers to detect CA72-4 for gastric carcinoma diagnosi

Gating a Single Cell:A Label-Free and Real-Time Measurement Method for Cellular Progression

There is an ever-growing need for more advanced methods to study the response of cancer cells to new therapies. To determine cancer cells’ response from a cell-mortality perspective to various cancer therapies, we report a label-free and real time method to monitor the in situ response of individual HeLa cells using a single cell gated transistor (SCGT). As a cell undergoes apoptotic cell death, it experiences changes in morphology and ion concentrations. This change is well in line with the threshold voltage of the SCGT, which has been verified by correlating the data with the cell morphologies by scanning electron microscopy and the ion-concentration analysis by inductively-coupled plasma mass spectrometry (ICPMS). This SCGT could replace patch clamps to study single cell activity via direct measurement in real time. Importantly, this SCGT can be used to study the electrical response of a single cell to stimuli that leaves the membrane intact

Rapid and Reversible Lithium Insertion with Multielectron Redox in the Wadsley-Roth Compound NaNb13O33

The development of high-performing battery materials is critical to meet the ever-increasing demand for portable energy storage for electronics and electric vehicles. Owing to their exceptionally high-rate capabilities, high volumetric capacities and long lifetimes, Wadsley-Roth compounds are promising lithium anode materials for fast-charging and high-powered devices. This study comprises an in-depth structural and initial electrochemical investigation of the Wadsley-Roth phase NaNb13O33 phase. To our knowledge, this is the first alkali-containing Wadsley-Roth compound tested for lithium insertion. Here, we report structural insights obtained from combined neutron and synchrotron diffraction as well as solid-state nuclear magnetic resonance (ss-NMR). We find that a variety of simple, solid-state methods reliably produce a ReO6-like base structure with periodic, ”shear” planes of edge-sharing NbO6 octahedra separating 5 x 3 octahedral blocks with square-planar Na+ occupying block corners. Through ss-NMR, we reveal the presence of sodium cations in block interior sites as well as square-planar block sites. Through combined experimental and computational studies, we demonstrate and rationalize the high-rate performance of this new anode material in lithium-ion half cells. Using X-ray photoelectron spectroscopy (XPS), we show the multi-electron redox of Nb, which enables capacities of 225 mA h g−1 at slow rates and anodic potentials. Without down-sizing or nano-scaling, 100 mA h g−1 of this capacity is retained at 20 C in micrometer-scale particles. By combining bond-valence mapping and DFT, we show that such excellent rate performance results from facile, multi-channel lithium diffusion down octahedral block interiors and from high electronic conductivity within shear planes. Finally, we utilize differential capacity analysis to identify optimal long-term cycling rates and achieve 80% capacity retention over 600 cycles with 30-minute charging and discharging intervals. Without optimization, these results place NaNb13O33 in the ranks of promising new high-rate lithium anode materials and warrant further research

Dislocation-induced ultra-low lattice thermal conductivity in rare earth doped β-Zn4Sb3

Defect engineering in thermoelectric materials leads to the formation of exotic transport properties. Specifically, reduction in lattice thermal conductivity (кL) can be realized through scattering of low and high-frequency phonons by interfacial and point defects respectively. Herein we explore such phenomena by inducing dense dislocations through doping of rare earth (RE) impurities in β-(Zn1−xREx)4Sb3 [x = 0.3–0.5 at.%] as phonon scattering source of all frequencies. Lattice anharmonicity created results in an ultra-low кL of ~0.15 W/mK for β-(Zn0.997 Yb0.003)4Sb3. Vibrational properties and phonon scattering altered by the lattice anharmonicity are studied in detail through terahertz and infrared spectroscopies

Photoredox catalysis for the fabrication of water-repellent surfaces with application for oil/water separation

Silanization processes with perfluoroalkyl silanes have been demonstrated to be effective in developing advanced materials with many functional properties, including hydrophobicity, water repellency, and self-cleaning properties. However, practical industrial applications of perfluoroalkyl silanes are limited by their extremely high cost. On the basis of our recent work on photoredox catalysis for amidation with perfluoroalkyl iodides, its application for surface chemical modification on filter paper, as an illustrative example, has been developed and evaluated. Before photocatalytic amidation, the surface is functionalized with amine functional groups by silanization with 3-(trimethoxysilyl)propylamine. All chemically modified surfaces have been fully characterized by attenuated total reflection infrared (ATR-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), and three-dimensional (3D) profiling to confirm the successful silanization and photocatalytic amidation. After surface modification of the filter papers with perfluoroalkanamide, they show high water repellency and hydrophobicity with contact angles over 120°. These filter papers possess high wetting selectivity, which can be used to effectively separate the organic and aqueous biphasic mixtures. The perfluoroalkanamide-modified filter papers can be used for separating organic/aqueous biphasic mixtures over many cycles without lowering the separating efficiency, indicating their reusability and excellent durability

Simultaneous enhancement of thermopower and electrical conductivity through isovalent substitution of cerium in bismuth selenide thermoelectric materials

It is challenging to achieve highly efficient thermoelectric materials due to the conflicts between thermopower (Seebeck coefficient) and electrical conductivity. These parameters are the core factors defining the thermoelectric property of any material. Here, we report the use of isovalent substitution as a tool to decouple the interdependency of the Seebeck coefficient and the electrical properties of cerium-doped bismuth selenide thermoelectric material. With this strategy, we can achieve a simultaneous increase in both the electrical conductivity and the Seebeck coefficient of the material by tuning the concentration of cerium doping, due to formation of neutral impurities and consequently the improvement of carrier mobility. Our theoretical calculation reveals a downward shift of the valence band with cerium concentration, which influences the thermoelectric enhancement of the synthesized materials. Finally, an order of magnitude enhancement of the figure of merit is obtained due to isovalent substitution, thus providing a new avenue for enhancing the thermoelectric performance of materials