4,555 research outputs found
A simple construction of complex equiangular lines
A set of vectors of equal norm in represents equiangular lines
if the magnitudes of the inner product of every pair of distinct vectors in the
set are equal. The maximum size of such a set is , and it is conjectured
that sets of this maximum size exist in for every . We
describe a new construction for maximum-sized sets of equiangular lines,
exposing a previously unrecognized connection with Hadamard matrices. The
construction produces a maximum-sized set of equiangular lines in dimensions 2,
3 and 8.Comment: 11 pages; minor revisions and comments added in section 1 describing
a link to previously known results; correction to Theorem 1 and updates to
reference
On the interpretation of lateral manganin gauge stress measurements in polymers
Encapsulated wire-element stress gauges enable changes in lateral stress during
shock loading to be directly monitored. However, there is substantial debate
with regards to interpretation of observed changes in stress behind the shock
front; a phenomenon attributed both to changes in material strength and shock-
dispersion within the gauge-encapsulation. Here, a pair of novel techniques
which both modify or remove the embedding medium where such stress gauges are
placed within target materials have been used to try and inform this debate. The
behavior of three polymeric materials of differing complexity was considered,
namely polystyrene, the commercially important resin transfer moulding RTM 6
resin and a commercially available fat lard. Comparison to the response of
embedded gauges has suggested a possible slight decrease in the absolute
magnitude of stress. However, changing the encapsulation has no detectable
effect on the gradient behind the shock in such polymeric systems
On the dynamic tensile strength of Zirconium
Despite its fundamental nature, the process of dynamic tensile failure (spall) is poorly understood. Spall initiation via cracks, voids, etc, before subsequent coalesce, is known to be highly microstructure-dependant. In particular, the availability of slip planes and other methods of plastic deformation controls the onset (or lack thereof) of spall. While studies have been undertaken into the spall response of BCC and FCC materials, less attention has paid to the spall response of highly anisotropic HCP materials. Here the dynamic behaviour of zirconium is investigated via plate-impact experiments, with the aim of building on an ongoing in-house body of work investigating these highly complex materials. In particular, in this paper the effect of impact stress on spall in a commercially sourced Zr rod is considered, with apparent strain-rate softening highlighted
Lateral stress evolution in chromium sulfide cermets with varying excess chromium
The shock response of chromium sulfide-chromium, a cermet of potential interest as a matrix material for ballistic applications, has been investigated at two molar ratios. Using a combustion synthesis technique allowed for control of the molar ratio of the material, which was investigated under near-stoichiometric (cermet) and excess chromium (interpenetrating composite) conditions, representing chromium:sulfur molar ratios of 1.15:1 and 4:1, respectively. The compacts were investigated via the plate-impact technique, which allowed the material to be loaded under a onedimensional state of strain. Embedded manganin stress gauges were employed to monitor the temporal evolution of longitudinal and lateral components of stress in both materials. Comparison of these two components has allowed assessment of the variation of material shear strength both with impact pressure/strain-rate and time for the two molar ratio conditions. The two materials exhibited identical material strength despite variations in their excess chromium content
From SICs and MUBs to Eddington
This is a survey of some very old knowledge about Mutually Unbiased Bases
(MUB) and Symmetric Informationally Complete POVMs (SIC). In prime dimensions
the former are closely tied to an elliptic normal curve symmetric under the
Heisenberg group, while the latter are believed to be orbits under the
Heisenberg group in all dimensions. In dimensions 3 and 4 the SICs are
understandable in terms of elliptic curves, but a general statement escapes us.
The geometry of the SICs in 3 and 4 dimensions is discussed in some detail.Comment: 12 pages; from the Festschrift for Tony Sudber
SIC~POVMs and Clifford groups in prime dimensions
We show that in prime dimensions not equal to three, each group covariant
symmetric informationally complete positive operator valued measure (SIC~POVM)
is covariant with respect to a unique Heisenberg--Weyl (HW) group. Moreover,
the symmetry group of the SIC~POVM is a subgroup of the Clifford group. Hence,
two SIC~POVMs covariant with respect to the HW group are unitarily or
antiunitarily equivalent if and only if they are on the same orbit of the
extended Clifford group. In dimension three, each group covariant SIC~POVM may
be covariant with respect to three or nine HW groups, and the symmetry group of
the SIC~POVM is a subgroup of at least one of the Clifford groups of these HW
groups respectively. There may exist two or three orbits of equivalent
SIC~POVMs for each group covariant SIC~POVM, depending on the order of its
symmetry group. We then establish a complete equivalence relation among group
covariant SIC~POVMs in dimension three, and classify inequivalent ones
according to the geometric phases associated with fiducial vectors. Finally, we
uncover additional SIC~POVMs by regrouping of the fiducial vectors from
different SIC~POVMs which may or may not be on the same orbit of the extended
Clifford group.Comment: 30 pages, 1 figure, section 4 revised and extended, published in J.
Phys. A: Math. Theor. 43, 305305 (2010
The private, the public and the hybrid in umbilical cord blood banking – a global perspective
No description supplie
The Strength of two HMX based plastic bonded explosives during one dimensional shock loading
A series of experiments have been performed to probe the mechanical response of two HMX based plastic bonded explosives to one dimensional shock loading. Manganin stress gauges in longitudinal and lateral orientation to the loading axis have been used as the diagnostic. Results indicate that despite major differences in the binder phase and smaller differences in the HMX crystal loading and morphology, the Hugoniot and shear strengths behind the shock front are near identical. We have proposed that this is due to the HMX crystals forming a network that supports the bulk of the applied stress
The charged beam dumps for the international linear collider
The baseline configuration of the International Linear Collider requires 2
beam dumps per interaction region, each rated to 18MW of beam power, together
with additional beam dumps for tuning purposes and machine protection. The
baseline design uses high pressure moving water dumps, first developed for the
SLC and used in the TESLA design, although a gas based dump is also being
considered. In this paper we discuss the progress made by the international
community on both physics and engineering studies for the beam dumps.Comment: Presented at European Particle Accelerator Conference (EPAC 06),
Edinburgh, Scotland, 26-30 Jun 200
A Quantum-Bayesian Route to Quantum-State Space
In the quantum-Bayesian approach to quantum foundations, a quantum state is
viewed as an expression of an agent's personalist Bayesian degrees of belief,
or probabilities, concerning the results of measurements. These probabilities
obey the usual probability rules as required by Dutch-book coherence, but
quantum mechanics imposes additional constraints upon them. In this paper, we
explore the question of deriving the structure of quantum-state space from a
set of assumptions in the spirit of quantum Bayesianism. The starting point is
the representation of quantum states induced by a symmetric informationally
complete measurement or SIC. In this representation, the Born rule takes the
form of a particularly simple modification of the law of total probability. We
show how to derive key features of quantum-state space from (i) the requirement
that the Born rule arises as a simple modification of the law of total
probability and (ii) a limited number of additional assumptions of a strong
Bayesian flavor.Comment: 7 pages, 1 figure, to appear in Foundations of Physics; this is a
condensation of the argument in arXiv:0906.2187v1 [quant-ph], with special
attention paid to making all assumptions explici
- …