Secular changes in the physical development of students of the Medical University of Łódź

This study analyses, using selected somatometric features, secular trend changes which have occurred over a quarter of a century in female and male students of the Medical University of Łódź. The study is based on the results of an anthropometric survey carried out among first-year students who commenced their studies in the academic years 1978/79 (240 females and 193 males), 1982/83 (347 females and 188 males), 1988/89 (178 females and 165 males) and 2003/04 (188 females and 77 males). The following features were examined in all participants in the survey: body height (B-v), the height of the lower body segment measured from a floor base to the crista iliaca at the point on the mid-axillary line (B-ic), shoulder width (a-a), intertrochanteric distance (tro-tro) and resting chest circumference. To compare average values Student`s t-test was used with assumptions of equal and unequal variances. To gauge the magnitude of changes in specific features in the course of a quarter of a century a percentage difference in results was calculated for the years 2003/2004 and 1978/1979. The basis for the calculations was the initial value of a feature at the beginning of the period analysed. It was determined that in the 25-year period analysed (1978-2003) the young people commencing studies at the Medical University of Łódź exhibited an acceleration in the height of the lower body segment (B-ic) and of the intertrochanteric distance (tro-tro) and a deceleration in resting chest circumference. Additionally, an increase in shoulder width has been noted in female students; no significant intergenerational changes were noted in body height, although the last 15 years display certain symptoms of deceleration; there is an emerging tendency towards a blurring of the differences in body proportions between the sexes in the environment of the young people studying at the Medical University of Łódź

The perception of lip aesthetics in the context of facial proportions—An eye-tracking-based analysis

Background: Minimally invasive lip volumizing and contouring soft tissue filler procedures are frequently requested by both female and male aesthetic patients. Guidance on how to achieve the most beautiful outcome is inconsistent. Objective: To investigate what the most beautiful proportions are in relation to vermillion thickness, the distance of the upper and lower lip in relation to nose and chin, and relation to the bigonial distance. Methods: This study included a total of n = 101 volunteers (52 females, 49 males, 100% Caucasian) who inspected frontal images of modified facial proportions and answered a related questionnaire showcasing the same images. Image presentation followed a randomized sequence both for the eye tracking and for the survey component of this study but was equal for all observers. Results: The most attractive vertical position of lips was the 1:2 ratio in which the distance between lips and chin is double the length as the distance between lips and nose. For the ratio between the width of the lips and the bigonial distance, it was the 1:2.5 ratio, whereas for the thickness of the upper lip vermilion in relation to the upper lip ergotrid it was the 1:3/1:2 (male/female) ratio and for the lower lip vermilion and lower lip ergotrid it was the 1:4 ratio for both genders. Conclusion: The results of this eye tracking and survey-based investigation revealed that instead of one single universal ratio, multiple facial proportions exist that are perceived as most attractive/masculine/feminine. Regarding the perception of facial aesthetics, it appears there is a distinction between attractiveness and masculinity/femininity: the most attractive male/female face is not necessarily the most masculine or feminine.</p

The perception of lip aesthetics in the context of facial proportions—An eye-tracking-based analysis

Background: Minimally invasive lip volumizing and contouring soft tissue filler procedures are frequently requested by both female and male aesthetic patients. Guidance on how to achieve the most beautiful outcome is inconsistent. Objective: To investigate what the most beautiful proportions are in relation to vermillion thickness, the distance of the upper and lower lip in relation to nose and chin, and relation to the bigonial distance. Methods: This study included a total of n = 101 volunteers (52 females, 49 males, 100% Caucasian) who inspected frontal images of modified facial proportions and answered a related questionnaire showcasing the same images. Image presentation followed a randomized sequence both for the eye tracking and for the survey component of this study but was equal for all observers. Results: The most attractive vertical position of lips was the 1:2 ratio in which the distance between lips and chin is double the length as the distance between lips and nose. For the ratio between the width of the lips and the bigonial distance, it was the 1:2.5 ratio, whereas for the thickness of the upper lip vermilion in relation to the upper lip ergotrid it was the 1:3/1:2 (male/female) ratio and for the lower lip vermilion and lower lip ergotrid it was the 1:4 ratio for both genders. Conclusion: The results of this eye tracking and survey-based investigation revealed that instead of one single universal ratio, multiple facial proportions exist that are perceived as most attractive/masculine/feminine. Regarding the perception of facial aesthetics, it appears there is a distinction between attractiveness and masculinity/femininity: the most attractive male/female face is not necessarily the most masculine or feminine.</p

Evaluation Of Elastic Modulus And Stress Gradient Of PECVD Silicon Nitride Thin Films

This study investigated the techniques for determining the elastic modulus and estimating the stress gradient of plasma-enhanced chemical vapor deposition (PECVD) silicon nitride thin films. The experimentally determined elastic modulus was then used in a finite element beam model to compute the stress distribution inside the thin films using a commercial finite element analysis package. The computed beam displacement caused by a given stress gradient was compared with the displacement experimentally evaluated using optical interference microscopy. This comparison allows the stress gradient of the PECVD silicon nitride membrane introduced by the fabrication process to be evaluated

Body piercing and tattoos: a survey on young adults' knowledge of the risks and practices in body art

<p>Abstract</p> <p>Background</p> <p>The practice of tattooing and piercing has expanded in western society. In order to verify young adults' knowledge of the risk and practices related to body art, an investigation was conducted among freshmen of the University of Bari in the region of Apulia, Italy.</p> <p>Methods</p> <p>The study was carried out in the Academic Year 2009-2010 through an anonymous self-administered written questionnaire distributed to 1.656 freshmen enrolled in 17 Degree Courses.</p> <p>Results</p> <p>Of the 1.598 students included in the analysis, 78.3% believe it is risky to undergo piercing/tattoo practices. AIDS was indicated as a possible infection by 60.3% of freshmen, hepatitis C by 38.2%, tetanus by 34.3% and hepatitis B by 33.7% of the sample. 28.1% of freshmen were not aware that there are also non-infectious complications. 29% of the sample had at least one piercing or tattoo (this percentage does not include earlobe piercing in women). Of those with body art, the decision to undergo body art was made autonomously in 57.9% of the participants. 56.3% of freshmen undergoing body art had taken less than a month to decide. With regard to the reasons that led the sample to undergo body art, 28.4% were unable to explain it, 23.8% answered to improve their aesthetic aspect, 18.4% to distinguish themselves from others, 12.3% for fashion; 17.1% for other reasons. 25.4% of the sample declared that they had a piercing (79.8% female vs 20.2% male; ratio M/F 1:4.0). The average age for a first piercing was 15.3 years (range 10-27; SD ± 2.9). 9.6% of the sample declared that they have a tattoo (69.9% female vs 30.1% male; ratio M/F 1:2.3). The average age for a first tattoo was 17.5 years (range 10-26, SD ± 2.4).</p> <p>Conclusions</p> <p>Most of the freshmen knew about AIDS-related risks but not other potential risks. Body art is fairly common among young adults (especially women). The decision is often not shared with the family and is undertaken mostly without a specific reason or for the improvement of aesthetic aspect. Information about freshmen's knowledge, attitudes and practices could help in effective planning of health promotion strategies.</p

Analysis of the Quality of Sulfomolybdenum Coatings Obtained by Electrospark Alloying Methods

The authors of this paper have attempted to improve the quality of surface layers applied to steel elements of machine parts constituting friction couples. The main goal of the research was to investigate an electrospark alloying method process for obtaining abrasion-resistant tribological coatings containing molybdenum disulfide on a steel surface. A substance in the form of sulfur ointment with a sulfur content of 33.3% was applied on the surfaces of C22 and C40 steel specimens. In order to determine the influence of the energy parameters of ESA equipment on the quality parameters of coatings, the ESA process was carried out using a molybdenum electrode with discharge energies Wp = 0.13; Wp = 0.55; Wp = 3.4 J. The following tests were carried out on specimens with such coatings: metallographic analysis, microhardness tests, surface roughness, and local X-ray diffraction microanalysis. The experiments revealed that sulfomolybdenum coatings consist of four zones with different mechanical properties. Depending on the discharge energy and the substrate material, the hardness of these zones varies from approx. 1100 to over 10,000 MPa. Differences in the distribution of, among others, sulfur and molybdenum in the obtained coatings, as well as differences in the microstructure of the observed coatings, were observed

Assessment of Technological Capabilities for Forming Al-C-B System Coatings on Steel Surfaces by Electrospark Alloying Method

In this paper, the possibility of applying the electrospark alloying (ESA) method to obtain boron-containing coatings characterised by increased hardness and wear resistance is considered. A new method for producing such coatings is proposed. The method consists in applying grease containing aluminium powder and amorphous boron to the surface to be treated and subsequently processing the obtained surface using the ESA method by a graphite electrode. The microstructural analysis of the Al-C-B coatings on steel C40 showed that the surface layer consists of several zones, the number and parameters of which are determined by the energy conditions of the ESA process. Durametric studies showed that with an increase in the discharge energy influence, the microhardness values of both the upper strengthened layer and the diffusion zone increased to Wp = 0.13 J, Hµ = 6487 MPa, and Wp = 4.9 J, Hµ = 12350 MPa, respectively. The results of X-ray diffraction analysis indicate that at the discharge energies of 0.13 and 0.55 J, the phase composition of the coating is represented by solid solutions of body-centred cubic lattice (BCC) and face-centred cubic lattice (FCC). The coatings obtained at Wp = 4.9 J were characterised by the presence of intermetallics Fe4Al13 and borocementite Fe3 (CB) in addition to the solid solutions. The X-ray spectral analysis of the obtained coatings indicated that during the electrospark alloying process, the surface layers were saturated with aluminium, boron, and carbon. With increasing discharge energy, the diffusion zone increases; during the ESA process with the use of the discharge energy of 0.13 J for steel C40, the diffusion zone is 10–15 µm. When replacing a substrate made of steel C40 with the same one material but of steel C22, an increase in the thickness of the surface layer accompanied by a slight decrease in microhardness is observed as a result of processing with the use of the ESA method. There were simulated phase portraits of the Al-C-B coatings. It is shown that near the stationary points in the phase portraits, one can see either a slowing down of the evolution or a spiral twisting of the diffusion-process particle

Technological Features for Controlling Steel Part Quality Parameters by the Method of Electrospark Alloying Using Carburezer Containing Nitrogen—Carbon Components

A new method of surface modification based on the method of electrospark alloying (ESA) using carburizer containing nitrogen—carbon components for producing coatings is considered. New processes have been proposed that include the step of applying saturating media in the form of paste-like nitrogenous and nitrogenous-carbon components, respectively, onto the surface without waiting for those media to dry, conducting the ESA process with the use of a steel electrode-tool, as well as with a graphite electrode-tool. Before applying the saturating media, an aluminium layer is applied onto the surface with the use of the ESA method at a discharge energy of Wp = 0.13–6.80 J. A saturating medium in the form of a paste was applied to the surfaces of specimens of steel C22 and steel C40. During nitriding, nitrocarburizing and carburization by ESA (CESA) processes, with an increase in the discharge energy (Wp), the thickness, micro hardness and continuity of the “white layer” coatings, as well as the magnitude of the surface roughness, increase due to saturation of the steel surface with nitrogen and/or carbon, high cooling rates, formation of non-equilibrium structures, formation of special phases, etc. In the course of nitriding, nitrocarburizing and CESA processing of steels C22 and C40, preliminary processing with the use of the ESA method by aluminum increases the thickness, microhardness and continuity of the “white layer”, while the roughness changes insignificantly. Analysis of the phase composition indicates that the presence of the aluminum sublayer leads to the formation of the aluminum-containing phases, resulting in a significant increase in the hardness and, in addition, in an increase in the thickness and quality of the surface layers. The proposed methods can be used to strengthen the surface layers of the critical parts and their elements for compressor and pumping equipment

The influence of a surface texture on the effectiveness of lubricating the sliding pair

W opracowaniu przedstawiono niektóre problemy związane ze smarowaniem powierzchni teksturowanej. Zwrócono uwagę, że dla danego obciążenia skuteczność smarowania uzależniona będzie od kształtu, rozmiaru i wzajemnego rozłożenia elementów tekstury. Dla tekstur o siatce prostokątnej i zagłębień o przekroju okrągłym przedstawiono propozycje określania parametrów nierównomierności smarowania. W części eksperymentalnej przedstawiono metodykę laserowego teksturowania, metodykę badań tribologicznych oraz wyniki wstępnych testów.The paper presents some of the problems associated with the lubrication of laser textured surface. It was noted that the lubrication effect on the load depends on the shape, size and texture of the mutual distribution of elements. For textures with a square network distribution and circular profile of depressions in the grid, the proposed methods determine the parameters of uneven lubrication. The experimental part presents the methodology of laser texturing, tribological research and the results of preliminary tests

The effect of laser surface texturing on frictional performance of sliding pair

In this paper, a Nd:YAG laser was used to generate micropores on SiC surface and the structure and morphology features of surface micropores were observed. Tribological experiments were conducted with pin-on-disc tester under various loads and speeds. The article concentrates on identification of friction processes and also attempts to find a correlation between surface energy, friction force and topography of surface with geometrical texture