35 research outputs found
METHOD FOR ASSESSING THE NATIONAL IMPLICATIONS OF ENVIRONMENTAL IMPACTS FROM TIMBER BUILDINGS—AN EXEMPLARY STUDY FOR RESIDENTIAL BUILDINGS IN GERMANY
Since 2012, a set of new standards describing, among other aspects, the use of life cycle assessment (LCA) in the construction sector is available in Europe and provides a framework for consistently assessing the environmental performance of buildings. This article gives an overview of the actual state of art for evaluating the environmental properties of timber buildings in Europe and shows how these methods could be used as a basis for estimating the influence of a possible shift from conventional buildings to timber buildings on the national “Greenhouse Gas (GHG) budget,” whereby Germany serves as an example. Results from up-to-date LCA calculations of residential buildings for Germany are shown on a building level. Then a scaling from the building level to a national level is presented. On the national scale, the potential GHG impact of wood consumption in the building sector is modeled based on an insinuated future increase of the market share of timber buildings. The deviation of future emissions and removals due to the biogenic carbon storage effects for changing scenarios is presented. The approach shows how increasing timber construction (mass timber and timber frame) can contribute to achieving climate protection targets
Ingestion of colostrum from specific cows induces Bovine Neonatal Pancytopenia (BNP) in some calves
Background: Since 2006, cases of haemorrhagic diathesis in young calves have been observed with a much higher incidence than previously known. The syndrome, now uniformly called Bovine Neonatal Pancytopenia (BNP), is characterized by multiple (external and internal) haemorrhages, thrombocytopenia, leukocytopenia, and bone marrow depletion. Although various infectious and toxicological causes of bleeding disorders in calves have been ruled out, the aetiology of BNP remains unknown. However, field observations have led to the hypothesis that the aetiological principle may be transmitted to calves via colostrum. The objective of the present study was to verify whether ingestion of colostrum from dams of known BNP calves can elicit signs of BNP and typical haematological findings in conveniently selected neonatal calves. Six such calves received one feeding of colostrum (or a mixture of colostrum batches) from dams of known BNP calves. As controls, another six conveniently selected calves from herds which had never had a BNP case received one feeding of colostrum from their own dams. Haematological and clinical parameters were monitored. Results: One of the six experimental calves never showed any haematological, clinical or pathological evidence of BNP. In the other five calves, thrombocyte and leukocyte counts dropped within a few hours following ingestion of colostrum. Of those, three calves developed clinical signs of BNP, their post-mortem examination revealed bone marrow depletion. Of the remaining two calves, a pair of mixed twins, marked thrombocytopenia and recurrent leukocytopenia was evident in one, in which only slight changes in the bone marrow were detected, while in the other thrombocyte counts dropped, but rebounded later, and no bone marrow changes were noted. Thrombocyte counts of the experimental calves were statistically significantly lower than those of the control calves at 2 hours post ingestion of colostrum and at every sampling point between 9 hours and 8 days postcolostral. Leucocyte counts of the experimental calves were statistically significantly lower than those of control calves at 2 hours post ingestion of colostrum and 3-7 days postcolostral. Conclusions: BNP can be induced in some calves by ingestion of colostrum from cows that have given birth to BNP calves
The ALFAM2 database on ammonia emission from field-applied manure: Description and illustrative analysis
peer-reviewedAmmonia (NH3) emission from animal manure contributes to air pollution and ecosystem degradation, and the loss of reactive nitrogen (N) from agricultural systems. Estimates of NH3 emission are necessary for national inventories and nutrient management, and NH3 emission from field-applied manure has been measured in many studies over the past few decades. In this work, we facilitate the use of these data by collecting and organizing them in the ALFAM2 database. In this paper we describe the development of the database and summarise its contents, quantify effects of application methods and other variables on emission using a data subset, and discuss challenges for data analysis and model development. The database contains measurements of emission, manure and soil properties, weather, application technique, and other variables for 1895 plots from 22 research institutes in 12 countries. Data on five manure types (cattle, pig, mink, poultry, mixed, as well as sludge and “other”) applied to three types of crops (grass, small grains, maize, as well as stubble and bare soil) are included. Application methods represented in the database include broadcast, trailing hose, trailing shoe (narrow band application), and open slot injection. Cattle manure application to grassland was the most common combination, and analysis of this subset (with dry matter (DM) limited to <15%) was carried out using mixed- and fixed-effects models in order to quantify effects of management and environment on ammonia emission, and to highlight challenges for use of the database. Measured emission in this subset ranged from <1% to 130% of applied ammonia after 48 h. Results showed clear, albeit variable, reductions in NH3 emission due to trailing hose, trailing shoe, and open slot injection of slurry compared to broadcast application. There was evidence of positive effects of air temperature and wind speed on NH3 emission, and limited evidence of effects of slurry DM. However, random-effects coefficients for differences among research institutes were among the largest model coefficients, and showed a deviation from the mean response by more than 100% in some cases. The source of these institute differences could not be determined with certainty, but there is some evidence that they are related to differences in soils, or differences in application or measurement methods. The ALFAM2 database should be useful for development and evaluation of both emission factors and emission models, but users need to recognize the limitations caused by confounding variables, imbalance in the dataset, and dependence among observations from the same institute. Variation among measurements and in reported variables highlights the importance of international agreement on how NH3 emission should be measured, along with necessary types of supporting data and standard protocols for their measurement. Both are needed in order to produce more accurate and useful ammonia emission measurements. Expansion of the ALFAM2 database will continue, and readers are invited to contact the corresponding author for information on data submission. The latest version of the database is available at http://www.alfam.dk
How Building with Wood Can Be Linked to Sales of Building Plots: Results from an Exemplary Site Development in Munich, Germany
Cities today seek ways to comply with national climate targets. The urban authorities responsible for city planning are therefore responsible for defining the eco-efficiency of cities for decades to come. They need clear guidelines on how to reduce greenhouse gas emissions from the building stock in a specific area. The use of sustainably sourced wood in construction plays an increasingly vital part in the transition towards eco-cities. Drawing on an exemplary development site in Munich, this paper describes how the sale of building plots can be connected to an agreement to build with wood. Based on an actual research project, site-specific target values regarding greenhouse gas emissions and the amount of renewable material for specific building plots were developed by studying life cycle assessments for different buildings. Wood is introduced as a building material to achieve a minimal environmental footprint. The focus is set on linking the sale of building plots to an agreement to build primarily with wood. Target values for the buildings were developed in close cooperation with the city and were linked to the tendering of the plots. The proceedings and its implementation are shown in this paper
How building with wood can be linked to sales of building plots
Cities today seek ways to comply with national climate targets. The urban authorities responsible for city planning are therefore responsible for defining the eco-efficiency of cities for decades to come. They need clear guidelines on how to reduce greenhouse gas emissions from the building stock in a specific area. The use of sustainably sourced wood in construction plays an increasingly vital part in the transition towards eco-cities. Drawing on an exemplary development site in Munich, this paper describes how the sale of building plots can be connected to an agreement to build with wood. Based on an actual research project, site-specific target values regarding greenhouse gas emissions and the amount of renewable material for specific building plots were developed by studying life cycle assessments for different buildings. Wood is introduced as a building material to achieve a minimal environmental footprint. The focus is set on linking the sale of building plots to an agreement to build primarily with wood. Target values for the buildings were developed in close cooperation with the city and were linked to the tendering of the plots. The proceedings and its implementation are shown in this paper
Release of choline in the isolated heart, an indicator of ischemic phospholipid degradation and its protection by ischemic preconditioning: No evidence for a role of phospholipase D
The release of choline as a water-soluble product of phospholipid hydrolysis was measured in the perfusate of rat hearts to monitor ischemic membrane degradation and its protection by ischemic preconditioning (IPC). Hearts were subjected to global ischemia (GI; 30 min of no-flow) followed by 60 min of reperfusion. To induce IPC, GI was preceded by four no-flow episodes of 5 min each. Deleterious consequences of GI and reperfusion, namely coronary flow reduction, incidence of arrhythmias and release of cardiac troponin T, were significantly attenuated by IPC. The release of choline increased during reperfusion in a biphasic manner: a first phase peaked immediately after GI and was followed by a second, delayed phase indicating choline release caused during reperfusion. Only the second phase was blocked by both IPC and by AACOCF3 (5 microM), an inhibitor of cytosolic phospholipase A2. The activity of phospholipase D (PLD) was unchanged after GI or IPC or GI plus IPC. In conclusion, choline release into heart perfusate was found to be a useful real-time indicator of phospholipid degradation caused by GI and by reperfusion and its protection by IPC. The results supplement previous observations on the accumulation of fatty acids in the phospholipid pool. There was no evidence for PLD activation by GI or IPC
Creating a Resource Cadaster—A Case Study of a District in the Rhine-Ruhr Metropolitan Area
Today, both resource efficiency in general and the efficient use of natural resources specifically in the building sector are major political issues. Recent studies on resource efficiency have found the “anthropogenic stock” of the building sector to outweigh natural resource stocks. To make the anthropogenic stock accessible, material quantities with their individual composition need to be estimated and extrapolated to regional level. A geographical information system (GIS) is used as tool to handle the building specific data and combine them on regional level to calculate the anthropogenic stock. The resulting resource cadaster reflects the material quantities, divided into sixteen material fractions, of a specific residential district in the Rhine-Ruhr metropolitan area—a typical urban area in Germany. The case study area was weighted in total between 103.5 kt and 93 kt, depending on the dataset. This paper offers a step-by-step description of this approach, whereby a consistent dataset was created throughout the process of data collection and validation. In order to demonstrate the broader application of the resource cadaster, the results were extrapolated to the residential building sector of the entire federal state of North Rhine-Westphalia. In highly concentrated areas, like the Rhine-Ruhr Metropolitan area, both area-wide classification of material quantities and their regional localization are necessary to make the anthropogenic stock accessible. Information about toxic substances, however, also needs to be included in the process of data collection. This method of mapping could thus provide the foundation for future (re)uses of this stock. This study offers some concrete steps in the direction of achieving a circular economy
Urban Site Development as Temporal Carbon Storage—A Case Study in Germany
Increasing the use of sustainably sourced wood in construction for temporal carbon storage could be one vital part in the transition towards reaching the sustainable development goals for climate action and sustainable cities and communities. This paper explains the detailed steps from the planning to the realization process and shows how building with wood could be linked to the entire process from the sales of building plots to the realization of projects. Additionally, based on EN 15978, life cycle assessment (LCA) results of the constructed buildings were conducted to calculate the realistic carbon storage and the global warming potential for all new erected buildings on the site. The case study area and living lab is a building site in Munich with 566 flats, which will be finished in 2020 and will be the largest urban timber neighborhood in Germany by then. All development activities are summarized under the concept of building an eco-city with low carbon emissions and a high standard for living for all groups of inhabitants. Eight buildings with different material selections ranging from wood-constructions to wood-concrete hybrid constructions and concrete constructions with different energy standards are environmentally assessed. Results show that about 12.5 million kg of CO2 are stored in the wooden structures over the estimated life cycle of 50 years within this neighborhood. This clearly demonstrates the potential that building with wood has for achieving climate targets. Further results show that heating energy demand and material choices have a significant influence on LCA results