Looking beyond the boundaries of acquired firms:Exploring the phenomenon of inherited alliances

While traditionally research has looked at strategic alliances and acquisitions separately, in practice we observe that an acquirer may be confronted with the alliance agreements of the acquired firm. In my dissertation, I refer to an alliance of an acquired firm that an acquirer inherits through an acquisition as inherited alliance. The core objective of this dissertation is, therefore, to provide a better understanding of the unique characteristics that make the inherited alliances different from the homegrown alliances, and their implications. To achieve this goal, I conducted three empirical studies, using practitioners’ insights as well as rich secondary data from the biotechnology industry.In the first project, I firstly explore the phenomenon of inherited alliances by conducting interviews with biotechnology executives. Relying on these insights, I test the impact of the inherited alliances in a firm’s alliance portfolio on firm financial performance. The second project focuses on the navigating role of the acquired firm in the resilience of an alliance to an alliance partner acquisition. I test four hypotheses under which the acquired firm is likely to improve the inherited alliance’s resilience to an alliance partner acquisition. In the final project, I focus on the role of the inherited alliances in the post-acquisition governance and the moderating effect of the prior alliance tie between the acquiring and acquired firm. Together, this dissertation offers important insights into inherited alliances, helping us to better understand the different alliance origins and why acquired firm’s alliances should not be ignored in the acquisition deals

Determination of Chemical Diffusion Coefficient of Lithium Ions in Ceramics Derived from Pyrolysed Poly(1,2-dimethylsilazane) and Starch

AbstractThe apparent chemical diffusion coefficient Li+ (DappLI+) in pyrolysed poly(1,2-dimethylsilazane)/starch (PSN/S) (weight ratio: 30/70) ceramic anode composite is determined by galvanostatic intermittent titration technique (GITT). The electrode material composition is C6.00N0.14H0.47O0.12Si0.13. The calculated values of DappLI+, depend on the applied potential, vary from 10-14 to 10-9 [cm2/s]. The diffusion coefficient of lithium ions calculated in this work are similar with the values reported by other authors for carbonaceous anodes

Comparison of nested, multiplex, qPCR; FISH; SeptiFast and blood culture methods in detection and identification of bacteria and fungi in blood of patients with sepsis

BACKGROUND: Microbiological diagnosis of sepsis relies primarily on blood culture data. This study compares four diagnostic methods, i.e. those developed by us: nested, multiplex, qPCR (qPCR) and FISH with commercial methods: SeptiFast (Roche) (SF) and BacT/ALERT® 3D blood culture system (bioMérieux). Blood samples were derived from adult patients with clinical symptoms of sepsis, according to SIRS criteria, hospitalized in the Intensive Care Unit. RESULTS: Using qPCR, FISH, SF, and culture, microbial presence was found in 71.8%, 29.6%, 25.3%, and 36.6% of samples, respectively. It was demonstrated that qPCR was significantly more likely to detect microorganisms than the remaining methods; qPCR confirmed the results obtained with the SF kit in all cases wherein bacteria were detected with simultaneous confirmation of Gram-typing. All data collected through the FISH method were corroborated by qPCR. CONCLUSIONS: The qPCR and FISH methods described in this study may constitute alternatives to blood culture and to the few existing commercial molecular assays since they enable the detection of the majority of microbial species, and the qPCR method allows their identification in a higher number of samples than the SF test. FISH made it possible to show the presence of microbes in a blood sample even before its culture

Antimicrobial properties of selected copper alloys on Staphylococcus aureus and Escherichia coli in different simulations of environmental conditions : with vs. without organic contamination

Background: Hospital equipment made from copper alloys can play an important role in complementing traditional methods of disinfection. Aims of the study: The aim of this study was to assess the dynamics of the antimicrobial properties of selected copper alloys in different simulations of environmental conditions (with organic contamination vs. without organic contamination), and to test alternatives to the currently used testing methods. Materials and Methods: A modification of Japanese standard JIS Z 2801 as well as Staphylococcus aureus (SA) and Escherichia coli (EC) suspended in NaCl vs. tryptic soy broth (TSB) were used in tests performed on seven commonly used copper alloys, copper, and stainless steel. Results: A much faster reduction of the bacterial suspension was observed for the inoculum prepared in NaCl than in TSB. A faster reduction for EC than for SA was observed in the inoculum prepared in NaCl. The opposite results were found for the inoculum based on TSB. A significant correlation between the copper concentration in the copper alloys and the time and degree of bacterial suspension reduction was only observed in the case of EC. Conclusions: This study confirmed the antimicrobial properties of copper alloys, and additionally showed that Staphylococcus aureus was more resistant than Escherichia coli in the variant of the experiment without organic contamination. However, even for SA, a total reduction of the bacterial inoculum’s density took no longer than 2 h. Under conditions simulating organic contamination, all of the tested alloys were shown to have bactericidal or bacteriostatic properties, which was contrary to the results from stainless steel

Validation of LC/MS/MS method for assessment of the "in vitro" activity of selected rat cytochrome P450 isoenzymes : application to early drug metabolism screening

A sensitive and specific liquid chromatography/tandem mass spectrometry (LC/MS/MS) method for simultaneous determination of seven metabolites of CYP450 model substrates (acetaminophen, 4-hydroxytolbutamide, 4'-hydroxymephenytoin, 1-hydroxybufuralol, 6-hydroxychlorzoxazone. 1'-and 4-hydroxymidazolam) in rat liver microsomes was developed. The assay used Kinetex analytical column and a gradient mobile phase consistent of acetonitrile and water with addition of 0.1\% formic acid. The analysis was performed in selected reaction monitoring (SRM) mode both in positive and negative (for 6-hydroxychlorzoxazone) mode. The method was validated over the concentration ranges of 10-2000 ng/mL for 4-hydroxymephenytoin and 4-hydroxytolbutamide, 50-2000 ng/mL for 1-hydroxybufuralol and 25-2000 ng/mL for the rest of the analytes. The intra- and inter-day precision (2-12%) and accuracy (93-119%) were within the limits set by the FDA and EMA guidelines. The developed method was successfully applied to assess the activity of selected CYP450 isoenzymes in rat liver microsomes after addition of ketoconazole

Validation of LC/MS/MS method for assessment of the "in vitro" activity of the selected rat cytochrome P450 isoenzymes : application to early drug metabolism screening

A sensitive and specific liquid chromatography/tandem mass spectrometry (LC/MS/MS) method for simultaneous determination of seven metabolites of CYP450 model substrates (acetaminophen, 4-hydroxytolbutamide, 4í-hydroxymephenytoin, 1-hydroxybufuralol, 6-hydroxychlorzoxazone, 1í- and 4í-hydroxymidazolam) in rat liver microsomes was developed. The assay used Kinetex analytical column and a gradient mobile phase consistent of acetonitrile and water with addition of 0.1% formic acid. The analysis was performed in selected reaction monitoring (SRM) mode both in positive and negative (for 6-hydroxychlorzoxazone) mode. The method was validated over the concentration ranges of 10-2000 ng/mL for 4í-hydroxymephenytoin and 4-hydroxytolbutamide, 50-2000 ng/mL for 1-hydroxybufuralol and 25-2000 ng/mL for the rest of the analytes. The intra- and inter-day precision (2-12%) and accuracy (93-119%) were within the limits set by the FDA and EMA guidelines. The developed method was successfully applied to assess the activity of selected CYP450 isoenzymes in rat liver microsomes after addition of ketoconazole

Anomalous origin of culprit coronary arteries in acute coronary syndromes

Background: The aim of the study was to describe a series of acute coronary syndrome (ACS) patients in whom anomalous origin of culprit coronary artery (AOCCA) was diagnosed. Percutaneous coronary interventions (PCI) in AOCCA are performed very infrequently. Methods: Electronic databases from three high-volume tertiary cardiac centers were retrospectively searched for the presence of AOCCA in ACS. Results: Different types of AOCCA in ACS were identified in 20 patients. The most frequent AOCCA was left circumflex coronary artery (LCx) originating from right coronary artery (RCA) or directly from the right coronary sinus (RCS), n = 13, followed by high/atypical RCA, n = 3, left coronary artery (LCA) originating from RCS (n = 3) with either RCA-AOCCA (n = 1) or left anterior descending coronary artery (LAD)-AOCCA (n = 1) or RCA originating from left sinus of Valsalva, (n = 1), LAD originating from RCA (n = 1). In 1 ST-segment elevation myocardial infarction (STEMI)-patient RCA-AOCCA cannulation was unsuccessful, in 1 non-STEMI-patient AOCCA was missed, 1 ACS- -patient was treated surgically and 1 ACS-patient was treated conservatively (both patients with non- STEMI). In the remaining patients PCI was successfully performed. Conclusions: The most frequently encountered AOCCA is LCx branching-off from RCA. AOCCA may either be difficult to cannulate and PCI aborted even in STEMI, or missed, especially when the intermediate branch from LCA is mimicking proper LCx

High-density lipoprotein cholesterol, triglycerides, and characteristics of coronary atherosclerosis in patients with significant coronary artery disease newly diagnosed by computed tomography coronary angiography

Background: The Current European Society of Cardiology guidelines indicate specific target low-density lipoprotein cholesterol (LDL-C) levels for different cardiovascular risk categories in terms of prevention. However, the target for high-density lipoprotein cholesterol (HDL-C) and triglycerides has not been established.Aim: The study aims to investigate the associations between HDL-C, triglycerides, and coronary plaque characteristics.Methods: This was a prospective single-center study with enrolled consecutive patients with newly diagnosed significant (≥1 stenosis ≥50%) CAD on computed tomography coronary angiography (CTCA). Patients had lipids and CTCA analysis, including high-risk plaque (HRP) features: low-attenuation plaque (LAP), napkin-ring sign (NRS), positive remodeling (PR), and spotty calcium (SC), type of the plaque (calcified, noncalcified, mixed), and their composition (calcified, fibrous, fibro-fatty, necrotic core).Results: The study included 300 patients (191 men, 66 [8] years). Sixty-six percent of them had lipid-lowering therapy. HRP was found in 208 patients. There was no association between LDL-C, plaque composition, and HRP presence. There was a negative correlation between HDL-C, fibro-fatty and necrotic core plaque components (P = 0.0002, P = 0.0009). There was a positive correlation between triglycerides and necrotic core (P = 0.038). There were differences in HDL-C and triglycerides in patients with and without NRS (47 vs. 53 mg/dl, P = 0.0002 and 128 vs. 109 mg/dl, P = 0.02). In logistic regression, HDL-C (odds ratio [OR], 0.95; 95% confidence interval [CI], 0.93–0.98; P <0.001), triglycerides (OR, 1.00; 95% CI, 1.00–1.01; P = 0.02), and male sex (OR, 3.04; 95% CI, 1.41–6.52; P = 0.004) were NRS predictors. In multivariable regression, only HDL-C (OR, 0.96; 95% CI, 0.93–0.99; P = 0.02) was an independent predictor of NRS.Conclusion: Lower HDL-C and higher triglycerides were associated with NRS presence and more necrotic core plaque components in coronary plaques in patients with newly diagnosed CAD