Grafted ionomer complexes and their effect on protein adsorption on silica and polysulfone surfaces

We have studied the formation and the stability of ionomer complexes from grafted copolymers (GICs) in solution and the influence of GIC coatings on the adsorption of the proteins β-lactoglobulin (β-lac), bovine serum albumin (BSA), and lysozyme (Lsz) on silica and polysulfone. The GICs consist of the grafted copolymer PAA28-co-PAPEO22 {poly(acrylic acid)-co-poly[acrylate methoxy poly(ethylene oxide)]} with negatively charged AA and neutral APEO groups, and the positively charged homopolymers: P2MVPI43 [poly(N-methyl 2-vinyl pyridinium iodide)] and PAH∙HCl160 [poly(allylamine hydrochloride)]. In solution, these aggregates are characterized by means of dynamic and static light scattering. They appear to be assemblies with hydrodynamic radii of 8 nm (GIC-PAPEO22/P2MVPI43) and 22 nm (GIC-PAPEO22/PAH∙HCl160), respectively. The GICs partly disintegrate in solution at salt concentrations above 10 mM NaCl. Adsorption of GICs and proteins has been studied with fixed angle optical reflectometry at salt concentrations ranging from 1 to 50 mM NaCl. Adsorption of GICs results in high density PEO side chains on the surface. Higher densities were obtained for GICs consisting of PAH∙HCl160 (1.6 ÷ 1.9 chains/nm2) than of P2MVPI43 (0.6 ÷ 1.5 chains/nm2). Both GIC coatings strongly suppress adsorption of all proteins on silica (>90%); however, reduction of protein adsorption on polysulfone depends on the composition of the coating and the type of protein. We observed a moderate reduction of β-lac and Lsz adsorption (>60%). Adsorption of BSA on the GIC-PAPEO22/P2MVPI43 coating is moderately reduced, but on the GIC-PAPEO22/PAH∙HCl160 coating it is enhanced

Highly Porous Paper Loading with Microfibrillated Cellulose by Spray Coating on Wet Substrates

A laboratory bench for the spray coating of aqueous slurries on wet substrates and the subsequent water removal by vacuum filtration was used to load porous papers with microfibrillated cellulose (MFC). Spray coating provided an accurate control of the coating basis weight and, when increasing the MFC load, homogeneous films progressively formed on the substrate with negligible loss of MFC. Even in the presence of porous papers, the MFC coating remained confined on the surface of the substrate, at first forming irregular pots and then, as the MFC basis weight exceeded 6 g/m2, a continuous film. The formation of a MFC film induced a drop in the air permeability and a sharp increase in the tensile properties. Also, after film formation, the further increase of the MFC coating basis weight led to a linear increase of the tensile properties that, as for laminates, were predicted by the rule of mixture

Adsorption Characteristics of Stoichiometric and Nonstoichiometric Molecular Polyelectrolyte Complexes on Silicon Oxynitride Surfaces

Adsorption properties of stoichiometric and nonstoichiometric polyelectrolyte complexes (PECs) have been investigated by means of dual polarization interferometry (DPI) and X-ray photoelectron spectroscopy (XPS). Poly(sodium styrenesulfonate) (NaPSS) of molecular weight 4300 g/mol was used as polyanion, and two bottle-brush copolymers possessing different molar ratios of the cationic segment methacryloxyethyltrimethylammonium chloride (METAC) and the nonionic segment poly(ethylene oxide) methyl ether methacrylate (PEO45MEMA) were used as polycations. They are referred to as PEO45MEMA:METAC-25 and PEO45MEMA:METAC-50, where the last digits denote the mol%of charged main-chain segments. The time evolution of the adsorbed amount, thickness, and refractive index of the PEC layers were determined in aqueous solution using DPI. We demonstrate that cationic, uncharged, and negatively charged complexes adsorb to negatively charged silicon oxynitride and that maximum adsorption is achieved when small amounts of PSS are present in the complexes. The surface composition of the adsorbed PEC layers was estimated from XPS measurements that demonstrated very low content of NaPSS. On the basis of these data, the PEC adsorption mechanism is discussed and the competition between PSS and negative surface sites for association with the cationic polyelectrolyte is identified as a key issue