64 research outputs found
Representation and operation of tidal energy impoundments in a coastal hydrodynamic model
A methodology associated with the simulation of tidal range projects through a coastal hydrodynamic model is discussed regarding its capabilities and limitations. Particular focus is directed towards the formulations imposed for the representation of hydraulic structures and the corresponding model boundary conditions. Details of refinements are presented that would be applicable in representing the flow (and momentum flux) expected through tidal range turbines to inform the regional modelling of tidal lagoons and barrages. A conceptual tidal lagoon along the North Wales coast, a barrage across the Severn Estuary and the Swansea Bay Lagoon proposal are used to demonstrate the effect of the refinements for projects of a different scale. The hydrodynamic model results indicate that boundary refinements, particularly in the form of accurate momentum conservation, have a noticeable influence on near-field conditions and can be critical when assessing the environmental impact arising from the schemes. Finally, it is shown that these models can be used to guide and improve tidal impoundment proposals
Contact Tank Design Impact on Process Performance
In this study three-dimensional numerical models were refined to predict reactive processes in disinfection contact tanks (CTs). The methodology departs from the traditional performance assessment of contact tanks via hydraulic efficiency indicators, as it simulates directly transport and decay of the disinfectant, inactivation of pathogens and accumulation of by-products. The method is applied to study the effects of inlet and compartment design on contact tank performance, with special emphasis on turbulent mixing and minimisation of internal recirculation and short-circuiting. In contrast to the conventional approach of maximising the length-to-width ratio, the proposed design changes are aimed at addressing and mitigating adverse hydrodynamic structures, which have historically led to poor hydraulic efficiency in many existing contact tanks. The results suggest that water treatment facilities can benefit from in-depth analyses of the flow and kinetic processes through computational fluid dynamics, resulting in up to 38 % more efficient pathogen inactivation and 14 % less disinfection by-product formation
Tidal modelling with Thetis: preliminary English Channel benchmarking
This report describes the application and benchmarking of the Thetis coastal ocean model for tidal modelling, and makes use of a test case based upon the English Channel. Comparisons are made between model predictions and tide gauge data at a number of locations across the English Channel. A preliminary investigation of the impact of mesh resolution and bathymetry data is given. A demonstration is also provided of Thetis’s ability to use adjoint technology to optimise model predictions through the assimilation of observational data. In the example presented here the bottom friction field is optimised to provide an improved match between the model results and tide gauge data. This adjoint based optimisation capability may also be used to optimise the location, size and design of tidal power generation schemes
Influence of storm surge on tidal range energy
The regular and predictable nature of the tide makes the generation of electricity with a tidal lagoon or barrage an attractive form of renewable energy, yet storm surges affect the total water-level. Here, we present the first assessment of the potential impact of storm surges on tidal-range power. Water-level data (2000–2012) at nine UK tide gauges, where tidal-range energy is suitable for development (e.g. Bristol Channel), was used to predict power. Storm surge affected annual resource estimates −5% to +3%, due to inter-annual variability, which is lower than other sources of uncertainty (e.g. lagoon design); therefore, annual resource estimation from astronomical tides alone appears sufficient. However, instantaneous power output was often significantly affected (Normalised Root Mean Squared Error: 3%–8%, Scatter Index: 15%–41%) and so a storm surge prediction system may be required for any future electricity generation scenario that includes large amounts of tidal-range generation. The storm surge influence to tidal-range power varied with the electricity generation strategy considered (flooding tide only, ebb-only or dual; both flood and ebb), but with some spatial and temporal variability. The flood-only strategy was most affected by storm surge, mostly likely because tide-surge interaction increases the chance of higher water-levels on the flooding tide
Future scenarios and power generation of marine energy deployment around Great Britain
Renewable energy from wave energy converters and tidal stream turbines could play an important role in the future power system of Great Britain. However, scenarios of future deployment are highly uncertain and rarely spatially or temporally detailed enough to be used as suitable inputs to power system models. This paper presents a new resource for power system modellers which combines published projections for wave and tidal stream installed capacities with discrete geospatial coordinates of potential deployment sites from the literature to develop 'build scenarios' of future deployment around GB. Three build scenarios (low, intermediate and high) are presented for both wave and tidal stream generation. These scenarios can be used by power system modellers to analyse the contributions of marine energy to the future power system of Great Britain.</p
Tidal Stream vs. Wind Energy: The Value of Cyclic Power When Combined with Short-Term Storage in Hybrid Systems
This study quantifies the technical, economic and environmental performance of hybrid systems that use either a tidal stream or wind turbine, alongside short-term battery storage and back-up oil generators. The systems are designed to partially displace oil generators on the island of Alderney, located in the British Channel Islands. The tidal stream turbine provides four power generation periods per day, every day. This relatively high frequency power cycling limits the use of the oil generators to 1.6 GWh/year. In contrast, low wind resource periods can last for days, forcing the wind hybrid system to rely on the back-up oil generators over long periods, totalling 2.4 GWh/year (50% higher). For this reason the tidal hybrid system spends £0.25 million/year less on fuel by displacing a greater volume of oil, or £6.4 million over a 25 year operating life, assuming a flat cost of oil over this period. The tidal and wind hybrid systems achieve an oil displacement of 78% and 67% respectively (the same as the reduction in carbon emissions). For the wind hybrid system to displace the same amount of oil as the tidal hybrid system, two additional wind turbines are needed. The ability of the battery to store excess turbine energy during high tidal/wind resource periods relies on opportunities to regularly discharge stored energy. The tidal hybrid system achieves this during slack tides. Periods of high wind resource outlast those of high tidal resource, causing the battery to often remain fully charged and excess wind power to be curtailed. Consequently the wind hybrid system curtails 1.9 GWh/year, whilst the tidal turbine curtails 0.2 GWh/year. The ability of the tidal stream turbines to reduce curtailment, fuel costs and carbon emissions may provide a case for implementing them in hybrid systems, if these benefits outweigh their relatively high capital and operating expenditure.</jats:p
On the potential of linked-basin tidal power plants: An operational and coastal modelling assessment
Single-basin tidal range power plants have the advantage of predictable energy outputs, but feature non-generation periods in every tidal cycle. Linked-basin tidal power systems can reduce this variability and consistently generate power. However, as a concept the latter are under-studied with limited information on their performance relative to single-basin designs. In addressing this, we outline the basic principles of linked-basin power plant operation and report results from their numerical simulation. Tidal range energy operational models are applied to gauge their capabilities relative to conventional, single-basin tidal power plants. A coastal ocean model (Thetis) is then refined with linked-basin modelling capabilities. Simulations demonstrate that linked-basin systems can reduce non-generation periods at the expense of the extractable energy output relative to conventional tidal lagoons and barrages. As an example, a hypothetical case is considered for a site in the Severn Estuary, UK. The linked-basin system is seen to generate energy 80–100% of the time over a spring-neap cycle, but harnesses at best 30% of the energy of an equivalent-area single-basin design
Medium-term variability of the UK's combined tidal energy resource for a net-zero carbon grid
Drivers of Laptev Sea interannual variability in salinity and temperature
Eurasian rivers provide a quarter of total fresh water to the Arctic, maintaining a persistent fresh layer that covers the surface Arctic Ocean. This freshwater export controls Arctic Ocean stratification, circulation, and basin-wide sea ice concentration. The Lena River supplies the largest volume of runoff and plays a key role in this system, as runoff outflows into the Laptev Sea as a particularly shallow plume. Previous in situ and modelling studies suggest that local wind forcing is a driver of variability in Laptev sea surface salinity (SSS) but there is no consensus on the roles of Lena River discharge and sea ice cover in contributing to this variability or on the dominant driver of variability. Until recently, satellite SSS retrievals were insufficiently accurate for use in the Arctic. However, retreating sea ice cover and continuous progress in satellite product development have significantly improved SSS retrievals, giving satellite SSS data true potential in the Arctic. In this region, satellite-based SSS is found to agree well with in situ data (r>0.8) and provides notable improvements compared to the reanalysis product used in this study (r>0.7) in capturing patterns and variability observed in in situ data.
This study demonstrates a novel method of identifying the dominant drivers of interannual variability in Laptev Sea dynamics within reanalysis products and testing if these relationships appear to hold in satellite-based SSS, sea surface temperature (SST) data, and in situ observations. The satellite SSS data firmly establish what is suggested by reanalysis products and what has previously been subject to debate due to the limited years and locations analysed with in situ data; the zonal wind is the dominant driver of offshore or onshore Lena River plume transport. The eastward wind confines the plume to the southern Laptev Sea and drives alongshore transport into the East Siberian Sea, and westward wind drives offshore plume transport into the northern Laptev Sea. This finding is affirmed by the strong agreement in SSS pattern under eastward and westward wind regimes in all reanalyses and satellite products used in this study, as well as with in situ data. The pattern of SST also varies with the zonal wind component and drives spatial variability in sea ice concentration
- …