76 research outputs found
Carbon sequestration via enhanced weathering of peridotites and basalts in seawater
Enhanced weathering of mafic and ultramafic rocks has been suggested as a carbon sequestration strategy for the mitigation of climate change. This study was designed to assess the potential drawdown of CO 2 directly from the atmosphere by the enhanced weathering of peridotites and basalts in seawater. Pulverized, and ball milled dunite, harzburgite and olivine basalt were reacted in artificial seawater in batch reactor systems open to the atmosphere for two months. The results demonstrate that the ball-milled dunite and harzburgite changed dramatically the chemical composition of the seawater within a few hours, inducing CO 2 drawdown directly from the atmosphere and ultimately the precipitation of aragonite. In contrast, pulverized but unmilled rocks, and the ball-milled basalt, did not yield any significant changes in seawater composition during the two-month experiments. As much as 10 wt percent aragonite was precipitated during the experiment containing the finest-grained dunite. These results demonstrate that ball milling can substantially enhance the weathering rate of peridotites in marine environments, promoting the permanent storage of CO 2 as environmentally benign carbonate minerals through enhanced weathering. The precipitation of Mg-silicate clay minerals, however, could reduce the efficiency of this carbon sequestration approach over longer timescales
Low-temperature H2-SCR of NO on a novel Pt/MgO-CeO2 catalyst
The selective catalytic reduction of NO by H2 under strongly oxidizing conditions (H2-SCR) in the low-temperature range of 100–200 °C has been studied over Pt supported on a series of metal oxides (e.g., La2O3, MgO, Y2O3, CaO, CeO2, TiO2, SiO2 and MgO-CeO2). The Pt/MgO and Pt/CeO2 solids showed the best catalytic behavior with respect to N2 yield and the widest temperature window of operation compared with the other single metal oxide-supported Pt solids. An optimum 50 wt% MgO-50wt% CeO2 support composition and 0.3 wt% Pt loading (in the 0.1–2.0 wt% range) were found in terms of specific reaction rate of N2 production (mols N2/gcat s). High NO conversions (70–95%) and N2 selectivities (80–85%) were also obtained in the 100–200 °C range at a GHSV of 80,000 h−1 with the lowest 0.1 wt% Pt loading and using a feed stream of 0.25 vol% NO, 1 vol% H2, 5 vol% O2 and He as balance gas. Addition of 5 vol% H2O in the latter feed stream had a positive influence on the catalytic performance and practically no effect on the stability of the 0.1 wt% Pt/MgO-CeO2 during 24 h on reaction stream. Moreover, the latter catalytic system exhibited a high stability in the presence of 25–40 ppm SO2 in the feed stream following a given support pretreatment. N2 selectivity values in the 80–85% range were obtained over the 0.1 wt% Pt/MgO-CeO2 catalyst in the 100–200 °C range in the presence of water and SO2 in the feed stream. The above-mentioned results led to the obtainment of patents for the commercial exploitation of Pt/MgO-CeO2 catalyst towards a new NOx control technology in the low-temperature range of 100–200 °C using H2 as reducing agent. Temperature-programmed desorption (TPD) of NO, and transient titration of the adsorbed surface intermediate NOx species with H2 experiments, following reaction, have revealed important information towards the understanding of basic mechanistic issues of the present catalytic system (e.g., surface coverage, number and location of active NOx intermediate species, NOx spillover)
The Mechanism of Catalytic Reduction of NO with H2 in the Presence of O2 (Lean de-NOx) Over Supported-Pt Catalysts: The Effect of Support Chemical Composition and Pt Particle Size
Study of the NO/H2/O2 (lean-deNOx) Reaction on supported Pt catalysts, with practical applications
A Highly Active, Selective and Stable Pt/Mg-Ce-O Catalyst for the NO/H2/O2 (Lean de-NOx) Reaction
- …