Study of the Staebler-Wronski degradation effect in a-Si:H based p-i-n solar cell

Conversion of solar energy into electricity using environmentally safe and clean photovoltaic methods to supplement the ever increasing energy needs has been a cherished goal of many scientists and engineers around the world. Photovoltaic solar cells on the other hand, have been the power source for satellites ever since their introduction in the early sixties. For widespread terrestrial applications, however, the cost of photovoltaic systems must be reduced considerably. Much progress has been made in the recent past towards developing economically viable terrestrial systems, and the future looks highly promising. Thin film solar cells offer cost reductions mainly from their low processing cost, low material cost, and choice of low cost substrates. These are also very attractive for space applications because of their high power densities (power produced per kilogram of solar cell pay load) and high radiation resistance. Amorphous silicon based solar cells are amongst the top candidates for economically viable terrestrial and space based power generation. Despite very low federal funding during the eighties, amorphous silicon solar cell efficiencies have continually been improved - from a low 3 percent to over 13 percent now. Further improvements have been made by the use of multi-junction tandem solar cells. Efficiencies close to 15 percent have been achieved in several labs. In order to be competitive with fossil fuel generated electricity, it is believed that module efficiency of 15 percent or cell efficiency of 20 percent is required. Thus, further improvements in cell performance is imperative. One major problem that was discovered almost 15 years ago in amorphous silicon devices is the well known Staebler-Wronski Effect. Efficiency of amorphous silicon solar cells was found to degrade upon exposure to sunlight. Until now their is no consensus among the scientists on the mechanism for this degradation. Efficiency may degrade anywhere from 10 percent to almost 50 percent within the first few months of operation. In order to improve solar cell efficiencies, it is clear that the cause or causes of such degradation must be found and the processing conditions altered to minimize the loss in efficiency. This project was initiated in 1987 to investigate a possible link between metallic impurities, in particular, Ag, and this degradation. Such a link was established by one of the NASA scientists for the light induced degradation of n+/p crystalline silicon solar cells

Semi-Insulating Polysilicon Hetero- and Isotype Junctions on Silicon

The effects of nitrogen trifluorideinthe gas stream during deposition of semi-insulating polysilicon (SIPOS) on the electrical characteristics of undoped (SIPSO)/p-Si, and n+-SIPOS/n-Si isotype junctions were investigated. The current-voltage characteristics of undoped SIPOS/p-Si heterojunctions exhibit a strong dependence on the oxygen content of the SIPOS film and depart from a hyperbolic sine behavior as the refractive index of the SIPOS increases.. The addition of nitrogen trifluoride decreases the current density of these undoped SIPOS/p-Si heterojunctions due presumably to the oxidation/hydrolysis of SiF species intoSiO2. The n+-SIPOS formed a rectifying isotype junction o n-Si. The forward current voltage characteristics exhibit two distinct activation energies separated by a kink in the forward semi-logarithmic characteristics; one below the cut-in voltage and one above the cut-in voltage. The two activation energies result from the presence of interface states in the structures. However, the forward current-voltage characteristics of the fluorinated SIPOS isotype junctions exhibit no kink and only a single activation energy due, presumably, to hydrogen passivating the interfacial traps during the hydrolysis process

Sputter Deposition and Thallination of Ti-Ba-Ca-Cu-O Superconducting Thin Films

Thallination techniques used for the fabrication of sputter-deposited TI2Ba2CaCu 2Ox and TI2Ba2Ca2Cu3Ox superconducting thin films were investigated. Differences in elemental composition of precursor Ba-Ca-Cu-O sputtering targets were found to yield different superconducting phases. Thallination conditions which yielded transition temperatures as high as 122 K for samples annealed in air are described. Finally, reactive ion etching of films using a mixture of chlorine and argon gases is discussed

Transport across nanogaps using semiclassically consistent boundary conditions

Charge particle transport across nanogaps is studied theoretically within the Schrodinger-Poisson mean field framework and the existence of limiting current investigated. It is shown that the choice of a first order WKB wavefunction as the transmitted wave leads to self consistent boundary conditions and gives results that are significantly different in the non-classical regime from those obtained using a plane transmitted wave. At zero injection energies, the quantum limiting current density, J_c, is found to obey the local scaling law J_c ~ (V_g)^alpha/(D)^{5-2alpha} with the gap separation D and voltage V_g. The exponent alpha > 1.1 with alpha --> 3/2 in the classical regime of small de Broglie wavelengths. These results are consistent with recent experiments using nanogaps most of which are found to be in a parameter regime where classical space charge limited scaling holds away from the emission dominated regime.Comment: 4 pages, 4 ps figure

Comparison of High-Temperature Superconductors in Multi-Chip Module Applications

In the application of high-temperature superconductors (HTSCs) in multi-chip module (MCM) technology, it is first necessary to investigate the advantages and disadvantages of the various HTSC compounds. The standard criteria for comparing the suitability of HTSCs in electronics applications has been critical temperature (Tc )and critical current density (Jc ). It is also necessary to consider the physical properties of HTSCs in relation to the various processing techniques required in fabrication of MCMs. These techniques can be grouped into four main areas: deposition, patterning, packaging, and characterization. The four main HTSC materials, Y-Ba-Cu-O, Bi-Sr-Ca-Cu-O, Tl,Ba-Ca-Cu-O and Hg-Ba-Ca-Cu-O, will be compared to determine which is most suitable for MCM application

Locating the ‘radical’ in 'Shoot the Messenger'

This is the author's accepted manuscript. The final published article is available from the link below, copyright 2013 @ Edinburgh University Press.The 2006 BBC drama Shoot the Messenger is based on the psychological journey of a Black schoolteacher, Joe Pascale, accused of assaulting a Black male pupil. The allegation triggers Joe's mental breakdown which is articulated, through Joe's first-person narration, as a vindictive loathing of Black people. In turn, a range of common stereotypical characterisations and discourses based on a Black culture of hypocrisy, blame and entitlement is presented. The text is therefore laid wide open to a critique of its neo-conservatism and hegemonic narratives of Black Britishness. However, the drama's presentation of Black mental illness suggests that Shoot the Messenger may also be interpreted as a critique of social inequality and the destabilising effects of living with ethnicised social categories. Through an analysis of issues of representation, the article reclaims this controversial text as a radical drama and examines its implications for and within a critical cultural politics of ‘race’ and representation

Multisite Microprobes for Electrochemical Recordings in Biological Dynamics

For over 30 years, techniques have been developed that allow for the microscale (10-30 /mum) measurement of chemical signals with high temporal resolution (1-200 Hz). Such measurements, called in vivo electrochemical recordings, allow for the direct determination of neurotransmitter molecules and related compounds in biological systems. Multiple recordings, simultaneously performed at different, closely spaced, well defined locations throughout a three-dimensional tissue volume in the brain, are of interest in neuroscience. Developments in microelectronic techniques enable the fabrication of multi-electrode microprobes for recording extracellular action potentials generated by individual neurons simultaneously. A high-yield microfabrication process has been successfully developed for the fabrication of a novel semiconductor based, four-site silicon microprobe that involves a three-mask process and standard UV photolithography. A plasma process has been developed for dry etching of the gold electrodes and conducting lines. The electrochemical behavior of the microprobe is investigated by a high-speed computer-based in vitro electrochemical recording system. The electrochemical signals are measured at 5 Hz and varying gain. It is found that a selectivity of over 500:1 is achieved, and the signal to noise ratio of the recorded signal is particularly suitable for in vivo recordings

Multisite Microprobes for Electrochemical Recordings in Biological Dynamics

For over 30 years, techniques have been developed that allow for the microscale (10-30 /mum) measurement of chemical signals with high temporal resolution (1-200 Hz). Such measurements, called in vivo electrochemical recordings, allow for the direct determination of neurotransmitter molecules and related compounds in biological systems. Multiple recordings, simultaneously performed at different, closely spaced, well defined locations throughout a three-dimensional tissue volume in the brain, are of interest in neuroscience. Developments in microelectronic techniques enable the fabrication of multi-electrode microprobes for recording extracellular action potentials generated by individual neurons simultaneously. A high-yield microfabrication process has been successfully developed for the fabrication of a novel semiconductor based, four-site silicon microprobe that involves a three-mask process and standard UV photolithography. A plasma process has been developed for dry etching of the gold electrodes and conducting lines. The electrochemical behavior of the microprobe is investigated by a high-speed computer-based in vitro electrochemical recording system. The electrochemical signals are measured at 5 Hz and varying gain. It is found that a selectivity of over 500:1 is achieved, and the signal to noise ratio of the recorded signal is particularly suitable for in vivo recordings

Space-charge-limited flows in the quantum regime

This paper reviews the recent developments of space-charge-limited (SCL) flow or Child-Langmuir (CL) law in the quantum regime. According to the classical CL law for planar diodes, the current density scales as 3/23∕2’s power of gap voltage and to the inverse squared power of gap spacing. When the electron de Broglie wavelength is comparable or larger than the gap spacing, the classical SCL current density is enhanced by a large factor due to electron tunneling and exchange-correlation effects, and there is a new quantum scaling for the current density, which is proportional to the 1/21∕2’s power of gap voltage, and to the inverse fourth-power of gap spacing. It is also found that the classical concepts of the SCL flow such as bipolar flow, transit time, beam-loaded capacitance, emitted charge density, and magnetic insulation are no longer valid in quantum regime. In the quantum regime, there exists a minimum transit time of the SCL flows, in contrast to the classical solution. By including the surface properties of the emitting surface, there is a threshold voltage that is required to obtain the quantum CL law. The implications of the Fowler-Nordheim-like field emission in the presence of intense space charge over the nanometer scale is discussed.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/87757/2/056701_1.pd