18 research outputs found
Protecting High Energy Barriers: A New Equation to Regulate Boost Energy in Accelerated Molecular Dynamics Simulations
Molecular dynamics (MD) is one of the most common tools in computational chemistry. Recently, our group has employed accelerated molecular dynamics (aMD) to improve the conformational sampling over conventional molecular dynamics techniques. In the original aMD implementation, sampling is greatly improved by raising energy wells below a predefined energy level. Recently, our group presented an alternative aMD implementation where simulations are accelerated by lowering energy barriers of the potential energy surface. When coupled with thermodynamic integration simulations, this implementation showed very promising results. However, when applied to large systems, such as proteins, the simulation tends to be biased to high energy regions of the potential landscape. The reason for this behavior lies in the boost equation used since the highest energy barriers are dramatically more affected than the lower ones. To address this issue, in this work, we present a new boost equation that prevents oversampling of unfavorable high energy conformational states. The new boost potential provides not only better recovery of statistics throughout the simulation but also enhanced sampling of statistically relevant regions in explicit solvent MD simulations
On the Use of Accelerated Molecular Dynamics to Enhance Configurational Sampling in Ab Initio Simulations
We have implemented the accelerated molecular dynamics approach (Hamelberg, D.; Mongan, J.; McCammon, J. A. J. Chem. Phys. 2004, 120 (24), 11919) in the framework of ab initio MD (AIMD). Using three simple examples, we demonstrate that accelerated AIMD (A-AIMD) can be used to accelerate solvent relaxation in AIMD simulations and facilitate the detection of reaction coordinates: (i) We show, for one cyclohexane molecule in the gas phase, that the method can be used to accelerate the rate of the chair-to-chair interconversion by a factor of ∼1 × 105, while allowing for the reconstruction of the correct canonical distribution of low-energy states; (ii) We then show, for a water box of 64 H2O molecules, that A-AIMD can also be used in the condensed phase to accelerate the sampling of water conformations, without affecting the structural properties of the solvent; and (iii) The method is then used to compute the potential of mean force (PMF) for the dissociation of Na−Cl in water, accelerating the convergence by a factor of ∼3−4 compared to conventional AIMD simulations.(2) These results suggest that A-AIMD is a useful addition to existing methods for enhanced conformational and phase-space sampling in solution. While the method does not make the use of collective variables superfluous, it also does not require the user to define a set of collective variables that can capture all the low-energy minima on the potential energy surface. This property may prove very useful when dealing with highly complex multidimensional systems that require a quantum mechanical treatment
Using Selectively Applied Accelerated Molecular Dynamics to Enhance Free Energy Calculations
Accelerated molecular dynamics (aMD) has been shown to enhance conformational space sampling relative to classical molecular dynamics; however, the exponential reweighting of aMD trajectories, which is necessary for the calculation of free energies relating to the classical system, is oftentimes problematic, especially for systems larger than small poly peptides. Here, we propose a method of accelerating only the degrees of freedom most pertinent to sampling, thereby reducing the total acceleration added to the system and improving the convergence of calculated ensemble averages, which we term selective aMD. Its application is highlighted in two biomolecular cases. First, the model system alanine dipeptide is simulated with classical MD, all-dihedral aMD, and selective aMD, and these results are compared to the infinite sampling limit as calculated with metadynamics. We show that both forms of aMD enhance the convergence of the underlying free energy landscape by 5-fold relative to classical MD; however, selective aMD can produce improved statistics over all-dihedral aMD due to the improved reweighting. Then we focus on the pharmaceutically relevant case of computing the free energy of the decoupling of oseltamivir in the active site of neuraminidase. Results show that selective aMD greatly reduces the cost of this alchemical free energy transformation, whereas all-dihedral aMD produces unreliable free energy estimates
The Synthesis of Macrocyclic Polystyrene by Sequential Atom Transfer Radical Reactions
A method for the production of macrocyclic polystyrene via ring closing of a linear !, -dibrominated polystyrene by an Atom Transfer Radical Coupling (ATRC) reaction is described. The dibrominated polystyrene chain was produced from two simultaneous atom transfer radical polymerizations (ATRPs) originating from a dibrominated benzal bromide initiator. To ensure the retention of the halogen end groups polymerization was allowed to proceed to less than 50% conversion. Using this precursor in an intramolecular ATRC (ring closing) reaction was found to yield in excess of 90% cyclic product based on refractive index-gel permeation chromatography (GPC) analysis. The cyclic architecture of the polymer was verified by GPC, Nuclear Magnetic Resonance (NMR), and mass spectrometry analysis. The utility of this method has been expanded by the addition of 2-methyl-2-nitrosopropane to the coupling reaction, which allows for the coupling to proceed at a faster rate and to yield macrocycles with incorporated alkoxyamine functionality. The alkoxyamine functionality allows for degradation of the cycles at high temperatures (\u3e125° C) and we hypothesize that it may allow the macrocycles to act as a macroinitiator for a ring expansion polymerization in future studies
Synthesis of Macrocyclic Polymers Formed via Intramolecular Radical Trap-Assisted Atom Transfer Radical Coupling
The synthesis of cyclic polystyrene (Pst) with an alkoxyamine functionality has been accomplished by intramolecular radical coupling in the presence of a nitroso radical trap Linear alpha,omega-dibrominated polystyrene, produced by the atom transfer radical polymerization (ATRP) of styrene using a dibrominated initiator, was subjected to chain-end activation via the atom transfer radical coupling (ATRC) process under pseudodilute conditions in the presence of 2-methyl-2-nitrosopropane (MNP). This radical trap-assisted, intramolecular ATRC (RTA-ATRC) produced cyclic polymers in greater than 90% yields possessing \u3c G \u3e values in the 0.8-0.9 range as determined by gel permeation chromatography (GPC). Thermal-induced opening of the cycles, made possible by the incorporated alkoxyamine, resulted in a return to the original apparent molecular weight, further supporting the formation of cyclic polymers in the RTA-ATRC reaction. Liquid chromatography-mass spectrometry (LC-MS) provided direct confirmation of the cyclic architecture and the incorporation of the nitroso group into the macrocycle RTA-ATRC cyclizations carried out with faster rates of polymer addition into the redox active solution and/or in the presence of a much larger excess of MNP (up to a 250:1 ratio of MNP:C-Br chain end) still yielded cyclic polymers that contained alkoxyamine functionality
Synthesis of Macrocyclic Polymers Formed via Intramolecular Radical Trap-Assisted Atom Transfer Radical Coupling
The synthesis of cyclic polystyrene (PSt) with an alkoxyamine
functionality
has been accomplished by intramolecular radical coupling in the presence
of a nitroso radical trap. Linear α,ω-dibrominated polystyrene,
produced by the atom transfer radical polymerization (ATRP) of styrene
using a dibrominated initiator, was subjected to chain-end activation
via the atom transfer radical coupling (ATRC) process under pseudodilute
conditions in the presence of 2-methyl-2-nitrosopropane (MNP). This
radical trap-assisted, intramolecular ATRC (RTA-ATRC) produced cyclic
polymers in greater than 90% yields, possessing ⟨<i>G</i>⟩ values in the 0.8–0.9 range as determined by gel
permeation chromatography (GPC). Thermal-induced opening of the cycles,
made possible by the incorporated alkoxyamine, resulted in a return
to the original apparent molecular weight, further supporting the
formation of cyclic polymers in the RTA-ATRC reaction. Liquid chromatography–mass
spectrometry (LC-MS) provided direct confirmation of the cyclic architecture
and the incorporation of the nitroso group into the macrocycle. RTA-ATRC
cyclizations carried out with faster rates of polymer addition into
the redox active solution and/or in the presence of a much larger
excess of MNP (up to a 250:1 ratio of MNP:C–Br chain end) still
yielded cyclic polymers that contained alkoxyamine functionality
Image acquisition and interpretation of 18F-DCFPyL (piflufolastat F 18) PET/CT: How we do it
Prostate-specific membrane antigen (PSMA)-targeted positron emission tomography (PET) is rapidly becoming widely accepted as the standard-of-care for imaging of men with prostate cancer. Labeled indications for regulatoryapproved agents include primary staging and recurrent disease in men at risk of metastases. The first commercial PSMA PET agent to become available was 18F-DCFPyL (piflufolastat F 18), a radiofluorinated small molecule with high-affinity for PSMA. The regulatory approval of 18F-DCFPyL hinged upon two key, multi-center, registration trials, OSPREY (patient population: highrisk primary staging) and CONDOR (patient population: biochemical recurrence). In this manuscript, we will (1) review key findings from the OSPREY and CONDOR trials, (2) discuss the clinical acquisition protocol we use for 18F-DCFPyL PET scanning, (3) present information on important pearls and pitfalls, (4) provide an overview of the PSMA reporting and data system (PSMA-RADS) interpretive framework, and (5) posit important future directions for research in PSMA PET. Our overall goal is to provide a brief introduction for practices and academic groups that are adopting 18F-DCFPyL PET scans for use in their patients with prostate cancer