A double-blind randomized clinical trial on the suggestive effect of anxiety management questionnaires in dental emergencies.

OBJECTIVE Dental anxiety is widespread among both children and adults. To diagnose dental anxiety, standardized anxiety questionnaires are recommended. Based on the suggestive nature of the questionnaires, the study aimed to find out whether asking respondents about personal coping strategies before dental treatment influences their anxiety. METHODS This prospective, double-blind, randomized controlled clinical trial included a total of 158 patients of a university dental clinic on emergency service. The intervention group (n = 82) received the Coping with Anxiety Questionnaire (CAQ) and the control group (n = 76) the Hierarchical Anxiety Questionnaire (HAF). State anxiety scores were assessed by using the State-Trait Anxiety Inventory (STAI) before and after the completion of each questionnaire. RESULTS Anxiety decreased in the intervention group (CAQ) (p < 0.001) and increased in the control group (HAF) (p < 0.001). CONCLUSION Within the limitations of the current study, a diagnostic tool of a standardized questionnaire for the assessment to assess personal coping strategies decreased state anxiety in comparison to a questionnaire assessing anxiety. CLINICAL TRIAL REGISTRATION https://www.drks.de, German Trials Register (DRKS00032450)

Comparative diagnosis of the alveolar antral artery canal in the lateral maxillary sinus wall in corresponding panoramic radiography and cone-beam computed tomography

Abstract Purpose Sinus lift operations are a tried and tested means of providing adequate implant prosthetics to patients with compromised jawbones. Knowledge of the arterial supply of the maxillary sinus region is essential for surgical treatment in this area. The aim of the present comparative study was to determine whether alveolar antral artery (AAA) canal can be diagnosed both in corresponding panoramic radiography (PR) and cone-beam computed tomography (CBCT). Methods A total of 335 patients with 635 sites and corresponding maxillary sinus in both PR and CBCT were selected and examined for AAA canal visibility. Results The visibility of the AAA canal was significantly higher in CBCT than in PR. A total of 154 (46.0%) AAA canals could be identified in the maxillary sinus on the right. However, only four (1.2%) of these were also visible in PR. The detected values of the AAA canals in the maxillary sinus on the left in the PR and CBCT images were similar to those of the right. While 164 AAA canals (49%) were observed in CBCT images, only 1 (0.3%) was identifiable in PR. Conclusions The results show that CBCT can be recommended for visualising the AAA canal when surgically planning sinus augmentation procedures. Graphical Abstrac

Wear Behavior of Ceramic CAD/CAM Crowns and Natural Antagonists

Objective: Evaluation of wear behavior of computer-aided design/computer-aided manufacturing (CAD/CAM) crowns from various restorative materials and natural antagonists. Method: Full CAD/CAM crowns fabricated with nanoceramic resin (Lava Ultimate (LU)), a glass ceramic in a resin interpenetrating matrix (Vita Enamic (VE)) and a lithium silicate reinforced ceramic enriched with zirconia (Vita Suprinity (VS)) were cemented on human molars. The crown and antagonists were subjected to simulated chewing. 3D data sets, before and after the chewing simulation, were generated and matched. Occlusal surface roughness, vertical and volume loss of the crowns and antagonists were analyzed. Results: Crown roughness was significantly different between the LU and VE groups after chewing simulation. Crown vertical loss differed in all groups. The highest crown volume loss was found in the LU group, and the lowest in the VE group. Comparisons between the LU and VE groups and the LU and VS groups were significantly different. The highest antagonist volume loss was reached in the VE group, the lowest was in the LU group. Conclusion: Roughness increased after chewing simulation. LU crowns are the most natural antagonist-friendly; these were the most susceptible to vertical and volume loss. Of the tested materials, the VE crowns are the most stable regarding occlusion

Polishing of Monolithic Zirconia Crowns—Results of Different Dental Practitioner Groups

This pilot study evaluates the surface roughness of monolithic zirconia crowns after chairside polishing by different dental practitioner groups. Four practitioner groups (group I: dental clinical students (n = 6); group II: dentists &lt; 2 years post-qualification experience (n = 6); group III: dentists &gt; 2 years post-qualification experience (n = 6) and group IV: dental technicians (n = 6)) were asked to polish two CAD/CAM-fabricated full-contour zirconia crowns (48 in total). A two-step zirconia polishing kit was used in both trials. The first trial (T1) was conducted without a time limitation. In the second trial (T2), the polish was restricted to 15 seconds for each polisher. Two blinded investigators (I1 and I2) analyzed the surface roughness (Ra) before and after polishing (Alicona measuring system). No statistically significant difference in surface roughness was found between the polishing results of the dental practitioner groups. Major difference in surface finish was achieved by dental technicians, with a median value of 25.4 nm (interquartile range 10.15–35.26 nm) for I1 in T1. The lowest difference was achieved by dental students, with a median value of Ra = 6.72 nm (interquartile range 4.7–17.9 nm) in T1. In T2, experienced dentists showed the highest difference in surface finish, with a median value of 41.35 nm (interquartile range 7.77–54.11). No significant correlation was found between polishing time and polishing results. The polishing of monolithic zirconium dioxide crowns can be performed with the present polishing set directly chairside after occlusal adjustment, regardless of the practitioner’s experience level

Survival of Fiber-Reinforced Composite Resin Post-Restored vs. Cast Post-and-Core-Restored Teeth: A Retrospective Clinical Study

Objective: The question of whether classic cast post-and-core (CPC) or fiber-reinforced composite resin posts (FRCP) are the best clinical decision has still not been fully solved. Materials and Methods: One hundred and sixty-two teeth were restored with FRCP, and 162 CPC restored teeth were included in this study with a matched-pair design. In a primary analysis, the survival rates after one year (primary endpoint) were compared. The additional analysis included an evaluation of tooth- and construction-specific variables and an illustration of the survival up to 60 months via Kaplan-Meier curves. Results: FRCP showed lower failure risk considering the definitive prosthetic restoration and tooth type compared to CPC restored teeth. In total, 17 failures were observed in the FRCP group and 35 failures in the CPC group. A 60-month survival rate of 79.3% for FRCP and 64.5% for CPC was observed. Teeth serving as abutments for telescopic dentures were more likely to be affected by failure compared to teeth restored with single crowns. Conclusion: Within the limitations of this study, the FRCP showed a lower failure risk compared to the CPC, considering the definitive prosthetic restoration and tooth type within the observation period

Microleakage of Different Self-Adhesive Materials for Lithium Disilicate CAD/CAM Crowns

Objectives: To evaluate the microleakage and marginal gap of various luting materials after cementing ceramic crowns. Methods: Cervical margins of human molars were designed as circular chamfers. Cementation of full-contour ceramic crowns was conducted with zinc-phosphate cement (Harvard cement), resin cement (Panavia F 2.0) and self-adhesive resin cements (RelyX Unicem, BifixSE, MaxCem Elite, PermaCem2.0, G-Cem). Aging of specimens was performed in artificial saliva, at 37 °C for four weeks and thermocycling. The marginal gap was measured with a scanning electron microscope and silver precipitation within the microleakage. All data were compared statistically. Results: Independent of the margin preparation, the highest median value for microleakage was 320.2 μm (Harvard cement), and the lowest was 0 μm (Panavia F 2.0). The median value for enamel was 0 µm and for dentin 270.9 μm (p &lt; 0.001), which was independent of the luting material. The marginal and absolute marginal gaps were not significantly different between the tested materials. There was no correlation between microleakage and the marginal gaps. Conclusion: Significant differences in microleakage were found between the tested luting materials (p &lt; 0.05). Independent from the luting materials, the microleakage in dentin showed significantly higher values than in enamel

Influence of Luting Materials on the Retention of Cemented Implant-Supported Crowns: An In Vitro Study

The retention force of cemented crowns on implant abutments with various luting materials was evaluated. Cobalt&ndash;chromium crowns were cemented onto tapered titanium abutments (Camlog) with eugenol-free temporary cement (RelyX TempBond NE), composite-based temporary cement (Bifix Temp), zinc phosphate cement (Harvard Cement), glass-ionomer cements (Meron, Fuji I), and resin-modified glass-ionomer cements (Fuji II, Fuji Plus, Ketac Cem Plus). Specimen aging via hydrostress was performed in artificial saliva at 37 &deg;C for 14 days (S1), followed by hydrothermal stress with thermocycling (S2). The crowns were removed, and the force was recorded (T1). Subsequently, the crowns were recemented, aged, and removed, and the force was recorded (T2, T3). The retention forces differences were statistically significant according to the storage conditions at T1 (p = 0.002) and T3 (p = 0.0002). After aging (S1), Ketac Cem Plus had the highest retention force median value difference (T3 versus T1) (&minus;773 N), whereas RelyX TempBond NE had the lowest (&minus;146 N). After aging (S2), Meron had the highest retention force median value difference (&minus;783 N), whereas RelyX TempBond NE had the lowest (&minus;168 N). Recementation decreased the retention force of the implant-supported cobalt&ndash;chromium crowns cemented and recemented with the same luting materials. Luting materials (at T1) and aging conditions significantly impacted the retention force

Cold Atmospheric Plasma Improves Shear Bond Strength of Veneering Composite to Zirconia

Chipping of veneering is the most common clinical complication for zirconia restorations. Veneering composite could be a promising alternative to renew restorations. Zirconia discs (3-YSZ) were prepared with varying surface treatments and bonded to indirect composite as follows: air abrasion and Scotchbond Universal (A/SU); air abrasion and Clearfil Ceramic Primer (A/C); air abrasion and MKZ Primer (A/M); air abrasion and Monobond Plus (A/MP); silica-coating and Scotchbond Universal (S/SU); air abrasion (AP/SU), additional cold atmospheric plasma treatment, and Scotchbond Universal. An indirect composite material was then applied to the zirconia specimens. Specimens were divided into subgroups for short-term (14 days storage at 37 °C and 5000 thermal cycles) and long-term (250 days storage and 37,500 thermal cycles) artificial aging. Shear bond strength measurement (SBS) was performed, and data were analyzed by Kruskal–Wallis-test and multiple comparison testing with Dunn’s correction (p ≤ 0.05). The median SBS values (MPa) of short- and long-term artificial aging were: 3.09/1.36 (A/SU); 0.77/1.43 (S/SU); 2.82/2.15 (AP/SU); 1.97/1.80 (A/C); 2.01/1.58 (A/M); and 1.70/1.68 (A/MP). For short-term artificial aging A/SU showed the highest median SBS values, whereas in the long-term trial, AP/SU showed the highest values and the difference was significant. A prolonged artificial aging decreased SBS in all groups, except S/SU. In summary, treatment with CAP can improve SBS in the long-term

Table_1_A double-blind randomized clinical trial on the suggestive effect of anxiety management questionnaires in dental emergencies.DOC

ObjectiveDental anxiety is widespread among both children and adults. To diagnose dental anxiety, standardized anxiety questionnaires are recommended. Based on the suggestive nature of the questionnaires, the study aimed to find out whether asking respondents about personal coping strategies before dental treatment influences their anxiety.MethodsThis prospective, double-blind, randomized controlled clinical trial included a total of 158 patients of a university dental clinic on emergency service. The intervention group (n = 82) received the Coping with Anxiety Questionnaire (CAQ) and the control group (n = 76) the Hierarchical Anxiety Questionnaire (HAF). State anxiety scores were assessed by using the State–Trait Anxiety Inventory (STAI) before and after the completion of each questionnaire.ResultsAnxiety decreased in the intervention group (CAQ) (p ConclusionWithin the limitations of the current study, a diagnostic tool of a standardized questionnaire for the assessment to assess personal coping strategies decreased state anxiety in comparison to a questionnaire assessing anxiety.Clinical trial registrationhttps://www.drks.de, German Trials Register (DRKS00032450).</p