Sub-wavelength grating mode transformers in silicon slab waveguides.

We report on several new types of sub-wavelength grating (SWG) gradient index structures for efficient mode coupling in high index contrast slab waveguides. Using a SWG, an adiabatic transition is achieved at the interface between silicon-on-insulator waveguides of different geometries. The SWG transition region minimizes both fundamental mode mismatch loss and coupling to higher order modes. By creating the gradient effective index region in the direction of propagation, we demonstrate that efficient vertical mode transformation can be achieved between slab waveguides of different core thickness. The structures which we propose can be fabricated by a single etch step. Using 3D finite-difference time-domain simulations we study the loss, polarization dependence and the higher order mode excitation for two types (triangular and triangular-transverse) of SWG transition regions between silicon-on-insulator slab waveguides of different core thicknesses. We demonstrate two solutions to reduce the polarization dependent loss of these structures. Finally, we propose an implementation of SWG structures to reduce loss and higher order mode excitation between a slab waveguide and a phase array of an array waveguide grating (AWG). Compared to a conventional AWG, the loss is reduced from -1.4 dB to < -0.2 dB at the slab-array interface

Stress induced effects for advanced polarization control in silicon photonics components

We review the use of the oxide cladding stress-induced photoelastic effect to modify the polarization dependent properties in silicon-on-insulator (SOI) waveguide components, and highlight characteristics particular to this high index contrast (HIC) systems. The birefringence in SOI waveguides has its origin in the electromagnetic boundary conditions at the waveguide boundaries, and can be further modified by the presence of stress in the waveguiding materials. With typical stress levels in SiO2 films, which are often used as the upper cladding, the waveguide effective index can be altered anisotropically up to the order of 10−3 for ridges with heights ranging from 1 μm to 5 μm. This effect can be used effectively to counter the waveguide geometrical birefringence, allowing the waveguide cross-section profiles to be optimized for design criteria other than null geometrical birefringence. Design strategies are developed for using stress engineering to achieve a variety of functions. Polarization insensitive arrayed waveguide gratings (AWGs), polarization insensitive ring resonators, and polarization splitters and filters are demonstrated using these design principles

Archimedean spiral cavity ring resonators in silicon as ultra-compact optical comb filters

We present an ultra-compact comb filter using an add-drop ring resonator with an Archimedean spiral cavity. The cavity consists of two interleaved spiral branches which are connected in the center using arcs of circle of a radius that causes minimum bend loss. We describe the design procedure and examine the physical parameters governing the resonator performance. As an example, we demonstrate experimentally a comb filter with a 25 GHz channel spacing made of silicon photonic wires and only occupies an area of 80 × 90 µm2, approximately a 70 fold size reduction compared to a racetrack resonator. The filter transmission is free of spurious reflections, attesting to the smooth transition between different sections of the resonator cavity. Over a 40 channel wavelength span, the filter exhibits a quality factor Q > 35,000, extinction ratios > 10 dB, and an excellent power uniformity with variations < 0.5 dB for both the through and drop ports

Folded cavity SOI microring sensors for high sensitivity and real time measurement of biomolecular binding.

We demonstrate folded waveguide ring resonators for biomolecular sensing. We show that extending the ring cavity length increases the resonator quality factor, and thereby enhances the sensor resolution and minimum level of detection, while at the same time relaxing the tolerance on the coupling conditions to provide stable and large resonance contrast. The folded spiral path geometry allows a 1.2 mm long ring waveguide to be enclosed in a 150 microm diameter sensor area. The spiral cavity resonator is used to monitor the streptavidin protein binding with a detection limit of approximately 3 pg/mm(2), or a total mass of approximately 5 fg. The real time measurements are used to analyze the kinetics of biotin-streptavidin binding

Real-time cancellation of temperature induced resonance shifts in SOI wire waveguide ring resonator label-free biosensor arrays.

A comprehensive investigation of real-time temperature-induced resonance shift cancellation for silicon wire based biosensor arrays is reported for the first time. A reference resonator, protected by either a SU8 or SiO(2) cladding layer, is used to track temperature changes. The temperature dependence of resonators in aqueous solutions, pertinent to biosensing applications, is measured under steady-state conditions and the operating parameters influencing these properties are discussed. Real-time measurements show that the reference resonator resonances reflect the temperature changes without noticeable time delay, enabling effective cancellation of temperature-induced shifts. Binding between complementary IgG protein pairs is monitored over 4 orders of magnitude dynamic range down to a concentration of 20 pM, demonstrating a resolvable mass of 40 attograms. Reactions are measured over time periods as long as 3 hours with high stability, showing a scatter corresponding to a fluid refractive index fluctuation of ± 4 × 10(-6) in the baseline data. Sensor arrays with a SU8 protective cladding are easy to fabricate, while oxide cladding is found to provide superior stability for measurements involving long time scales

Tilted fiber Bragg grating sensor interrogation system using a high-resolution silicon-on-insulator arrayed waveguide grating

We report a compact high-resolution arrayed waveguide grating (AWG) interrogator system designed to measure the relative wavelength spacing between two individual resonances of a tilted fiber Bragg grating (TFBG) refractometer. The TFBG refractometer benefits from an internal wavelength and power reference provided by the core mode reflection resonance that can be used to determine cladding mode perturbations with high accuracy. The AWG interrogator is a planar waveguide device fabricated on a silicon-on-insulator platform, having 50 channels with a 0.18 nm wavelength separation and a footprint of 8 mm × 8 mm. By overlaying two adjacent interference orders of the AWG we demonstrate simultaneous monitoring of two widely separated resonances in real time with high wavelength resolution. The standard deviation of the measured wavelength shifts is 1.2 pm, and it is limited by the resolution of the optical spectrum analyzer used for the interrogator calibration measurements

A wavelength demultiplexer based on waveguide broadening in silicon-on-insulator platform

We propose a modified arrayed waveguide grating (AWG) demultiplexer formed by an array of parallel ridge waveguides of equal length fabricated in silicon-on-insulator (SOI). Each waveguide contains two sections with different widths. The lenghts of the two sections are modified from a waveguide to the adjacent waveguide, resulting in a wavelength dispersive phase array. With an appropiate demultiplexer output geometry, the light is focussed in the output slab waveguide combiner. The focal position is wavelength, dependent in the transverse direction, so that the optical signal is demultiplexed into separated output channels corresponding to different spectral bands. This device does not require bending waveguide sections which are essential in a conventional AWG demultiplexer, yielding very compact devices with potentially low loss. Numerical simulations have, been carried out to evaluate the influence of waveguide parameters such as lengths and widths of different waveguide sections on demultiplexer performance