Preparation of Microspheres and Monolithic Microporous Carbons from the Pyrolysis of Template-Free Hyper-Crosslinked Oligosaccharides Polymer

Carbon-based materials with different morphologies have special properties suitable for application in adsorption, catalysis, energy storage, and so on. Carbon spheres and carbon monoliths are also nanostructured materials showing promising results. However, the preparation of these materials often require the use of a template, which aggravates their costs, making the operations for their removal complex. In this work, hollow carbon microspheres and carbon monolith were successfully prepared via carbonization of hyper-crosslinked polymer based on either cyclodextrins or amylose, in a template-free way. The carbons obtained are of the microporous type, showing a surface area up to 610 m2/g, and a narrow pore distribution, typically between 5 and 15 Å

In Situ Synthesis of MIL-100(Fe) at the Surface of Fe3O4@AC as Highly Efficient Dye Adsorbing Nanocomposite

A new magnetic nanocomposite called MIL-100(Fe) @Fe3O4@AC was synthesized by the hydrothermal method as a stable adsorbent for the removal of Rhodamine B (RhB) dye from aqueous medium. In this work, in order to increase the carbon uptake capacity, magnetic carbon was first synthesized and then the Fe3O4 was used as the iron (III) supplier to synthesize MIL-100(Fe). The size of these nanocomposite is about 30–50 nm. Compared with activated charcoal (AC) and magnetic activated charcoal (Fe3O4@AC) nanoparticles, the surface area of MIL-100(Fe) @Fe3O4@AC were eminently increased while the magnetic property of this adsorbent was decreased. The surface area of AC, Fe3O4@AC, and MIL-100(Fe) @Fe3O4@AC was 121, 351, and 620 m2/g, respectively. The magnetic and thermal property, chemical structure, and morphology of the MIL-100(Fe) @Fe3O4@AC were considered by vibrating sample magnetometer (VSM), thermogravimetric analysis (TGA), zeta potential, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), Brunner-Emmet-Teller (BET), and transmission electron microscopy (TEM) analyses. The relatively high adsorption capacity was obtained at about 769.23 mg/g compared to other adsorbents to eliminate RhB dye from the aqueous solution within 40 min. Studies of adsorption kinetics and isotherms showed that RhB adsorption conformed the Langmuir isotherm model and the pseudo second-order kinetic model. Thermodynamic amounts depicted that the RhB adsorption was spontaneous and exothermic process. In addition, the obtained nanocomposite exhibited good reusability after several cycles. All experimental results showed that MIL-100(Fe) @Fe3O4@AC could be a prospective sorbent for the treatment of dye wastewater

Round Robin Test on Microplastic Counting and Identification Method

The aim of this work is to verify the quality, robustness, and accuracy of a standard analytical protocol for the determination of microplastics in aqueous textile matrices. In order to reach this objective, a round robin scale identification and quantification test program was conducted. In particular, this chapter describes the round robin test, an interlaboratory comparison test on standard microfilament suspensions initiated in November 2021 by an expression of interest open call. In total, 18 laboratories expressed their interest, and 13 participants sent their results. Each of these laboratories received a set of 10 samples, accompanied by a protocol. The 10 samples consisted of three replicates per type of three different synthetic yarns and a control sample. The data required were the number of microplastics per sample recognized as fibers or particles, microplastic fiber lengths and diameters, and identification of the polymer using vibrational spectroscopy (μ-FTIR and/or μ-Raman). The data collected were statistically elaborated. The results highlighted that the laboratories had different recovery rates directly related to their specific procedures and equipment. Although there were issues related to the correct use of the standard method and to the behavior of operators, the method proved to be valid for the determination of microplastics in aqueous matrices

Preparation and Analysis of Standard Microplastics

Over 14 million tons of microplastic have been accumulated in water resources and they are increasing yearly. About 8% of European microplastic released into the water are from synthetic textiles. This kind of microplastic is generally in the form of microfilaments. They have a higher potential to enter the food chain due to their size and shape. Although microfilaments generate great concern, no precise guidelines for their quantification and qualification are yet available. Thus, in this chapter, the origin of microfilaments is fully investigated. After that, a novel approach for identifying and counting microplastic with fiber shape is presented. An accurate method for preparing microfilament standard suspensions is described to facilitate lab tests and have a reliable methodology for monitoring microplastic pollution

Optimization of a Sustainable Protocol for the Extraction of Anthocyanins as Textile Dyes from Plant Materials

Anthocyanins are the largest group of polyphenolic pigments in the plant kingdom. These non-toxic, water-soluble compounds are responsible for the pink, red, purple, violet, and blue colors of fruits, vegetables, and flowers. Anthocyanins are widely used in the production of food, cosmetic and textile products, in the latter case to replace synthetic dyes with natural and sustainable alternatives. Here, we describe an environmentally benign method for the extraction of anthocyanins from red chicory and their characterization by HPLC-DAD and UPLC-MS. The protocol does not require hazardous solvents or chemicals and relies on a simple and scalable procedure that can be applied to red chicory waste streams for anthocyanin extraction. The extracted anthocyanins were characterized for stability over time and for their textile dyeing properties, achieving good values for washing fastness and, as expected, a pink-to-green color change that is reversible and can therefore be exploited in the fashion industry