2 research outputs found
Experimental Study on the Optimization of Dielectric Barrier Discharge Reactor for NOx Treatment
In this paper, a comprehensive study of a DBD reactor is conducted to investigate the optimum operating conditions of the reactor for NOx treatment. For each parameter, the objective is to find the maximum NOx removal efficiency with the minimum consumed power. Different effective parameters of the reactor i.e. electrode length and diameter, electrode and dielectric materials as well as parameters of power generator, i.e. voltage and frequency, are investigated. The results show that for this configuration, the electrode with 20 cm length and 10 mm diameter has the best performance. Aluminum as the inside electrode material and quartz as the dielectric material are selected. Furthermore, the optimum value for the pulse frequency is 16.6 kHz. For the mentioned optimum conditions, the NOx removal efficiency achieved is equal to almost 82% at the input power of 486 W. Furthermore, the highest achieved NOx removal is almost 92% at the input power of 864 W. The results of this paper can be used to reduce the energy consumption of NTP systems to acceptable levels
Evaluation of residence time on nitrogen oxides removal in non-thermal plasma reactor
Non-thermal plasma (NTP) has been introduced over the last few years as a promising after- treatment system for nitrogen oxides and particulate matter removal from diesel exhaust. NTP technology has not been commercialised as yet, due to its high rate of energy consumption. Therefore, it is important to seek out new methods to improve NTP performance. Residence time is a crucial parameter in engine
exhaust emissions treatment. In this paper, different electrode shapes are analysed and the corresponding residence time and NOx removal efficiency are studied. An axisymmetric laminar model is used for obtaining residence time distribution numerically using FLUENT software. If the mean residence time in a NTP plasma reactor increases, there will be a corresponding increase in the reaction time and consequently the pollutant removal efficiency increases. Three different screw thread electrodes and a rod electrode are examined. The results show the advantage
of screw thread electrodes in comparison with the rod electrode. Furthermore,between the screw thread electrodes, the electrode with the thread width of 1 mm has the highest NOx removal due to higher residence time and a greater number of micro-discharges. The results show that the residence time of the screw thread electrode with a thread width of 1 mm is 21% more than for the rod electrode