A physical model for seismic noise generation from sediment transport in rivers

Measuring sediment flux in rivers remains a significant problem in studies of landscape evolution. Recent studies suggest that observations of seismic noise near rivers can help provide such measurements, but the lack of models linking observed seismic quantities to sediment flux has prevented the method from being used. Here, we develop a forward model to describe the seismic noise induced by the transport of sediment in rivers. The model provides an expression for the power spectral density (PSD) of the Rayleigh waves generated by impulsive impacts from saltating particles which scales linearly with the number of particles of a given size and the square of the linear momentum. After incorporating expressions for the impact velocity and rate of impacts for fluvially transported sediment, we observe that the seismic noise PSD is strongly dependent on the sediment size, such that good constraints on grain size distribution are needed for reliable estimates of sediment flux based on seismic noise observations. The model predictions for the PSD are consistent with recent measurements and, based on these data, a first attempt at inverting seismic noise for the sediment flux is provided

Verification of an ADER-DG method for complex dynamic rupture problems

We present results of thorough benchmarking of an arbitrary high-order derivative discontinuous Galerkin (ADER-DG) method on unstructured meshes for advanced earthquake dynamic rupture problems. We verify the method by comparison to well-established numerical methods in a series of verification exercises, including dipping and branching fault geometries, heterogeneous initial conditions, bimaterial interfaces and several rate-and-state friction laws. We show that the combination of meshing flexibility and high-order accuracy of the ADER-DG method makes it a competitive tool to study earthquake dynamics in geometrically complicated setups

A Method for Calibration of the Local Magnitude Scale Based on Relative Spectral Amplitudes, and Application to the San Juan Bautista, California, Area

We develop and use a spectral empirical Green’s function approach to estimate the relative source amplitudes of earthquakes near San Juan Bautista, California. We isolate the source amplitudes from path effects by comparing the recorded spectra of pairs of events with similar location and focal mechanism, without computing the path effect. With this method, we estimate the relative moments of 1600 M 1.5–4 local earthquakes, and we use these moments to recalibrate the duration magnitude scale in this region. The estimated moments of these small earthquakes increase with catalog magnitude M_D roughly proportionally to 10^(1.1M_D), slightly more slowly than a moment‐magnitude scaling of 10^(1.5M_w). This more accurate magnitude scaling can be used in analyses of the local earthquakes, such as comparisons between the seismic moments and geodetic observations

Are Rapid Population Estimates Accurate? A Field Trial of Two Different Assessment Methods.

Emergencies resulting in large-scale displacement often lead to populations resettling in areas where basic health services and sanitation are unavailable. To plan relief-related activities quickly, rapid population size estimates are needed. The currently recommended Quadrat method estimates total population by extrapolating the average population size living in square blocks of known area to the total site surface. An alternative approach, the T-Square, provides a population estimate based on analysis of the spatial distribution of housing units taken throughout a site. We field tested both methods and validated the results against a census in Esturro Bairro, Beira, Mozambique. Compared to the census (population: 9,479), the T-Square yielded a better population estimate (9,523) than the Quadrat method (7,681; 95% confidence interval: 6,160-9,201), but was more difficult for field survey teams to implement. Although applicable only to similar sites, several general conclusions can be drawn for emergency planning

Estimating the effect of Earth elasticity and variable water density on tsunami speeds

The speed of tsunami waves is typically calculated using the shallow-water approximation over a rigid-body Earth. Recent comparisons of tsunami arrival times from the 11 March 2011 tsunami suggest, however, that the standard formulation has errors around the 1% level, and it has been suggested that the elasticity of the Earth can explain the discrepancy. While previous work has indeed shown that such elastic deformation can modify tsunami speeds, the effect has been neglected partly due to the difficulty in understanding how large this elastic effect is. Here, we remedy this by providing a new derivation and expression for how to incorporate the first-order effect that solid Earth elasticity and ocean water compressibility have on tsunami speeds. This result is shown to agree approximately with previous theory and helps to explain observed timing discrepancies from the 11 March 2011 tsunami. The dispersive elastic correction and the non-dispersive compressibility correction together may account for the majority of the observed discrepancy

Performances, meat quality and boar taint of castrates and entire male pigs fed a standard and a raw potato starch-enriched diet

In Europe there is increasing concern about the common practice of surgical castration of piglets without anaesthesia. One possible alternative to completely avoid castration is entire male pig production. Thus, the objective of the study was to compare the growth performance, carcass characteristics, organ weights, meat quality traits, fat score and boar taint compounds in the adipose tissue of group-penned entire male pigs and castrates. Furthermore, the effect of raw potato starch (RPS) fed for 7 days prior to slaughter was determined. Pigs (n = 36) were blocked by BW into 12 blocks (3 littermates/block) and assigned to three experimental groups: surgical castrates (C); entire males (EM); and entire males offered RPS (30 g RPS/100 g diet) for 7 days prior to slaughter (EM+). Pigs had ad libitum access to the feed from 22 to 107 kg, individual feed intake was recorded daily and BW once a week. Entire males grew slower (EM: 771, EM+: 776 v. C: 830 g/day; P 0.05) differ among experimental groups but the adipose tissue was more unsaturated in entire males than in C as indicated by the higher fat scores (EM: 69.1, EM+: 67.2 v. C: 63.6; P < 0.01). Feeding RPS reduced (P = 0.04) the skatole tissue concentrations (expressed in μg/g lipid) in EM+ (0.22) compared to EM (0.85), whereas androstenone and indole levels were not (P 0.60) affected (EM: 1.7 and 0.10, EM+: 2.0 and 0.09, respectively). Although the current results confirmed the high efficiency of entire males compared to castrates, the observed high androstenone levels represent a major challenge to implement entire males productio

Growth performance, carcass characteristics and meat quality of group-penned surgically castrated, immunocastrated (Improvac®) and entire male pigs and individually penned entire male pigs

The objective of the study was to compare growth performance, carcass characteristics, meat quality and fatty acid composition of the adipose tissue of group-penned barrows, immunocastrated boars and entire males. Furthermore, the effect of housing of entire males on the aforementioned parameters was evaluated. At 55.2 days of age, 52 Swiss Large White pigs were blocked by litter and assigned by BW to four experimental groups: barrows (C), immunocastrated boars (IC), entire males (EMG) reared in group pens and entire males (EMP) reared in individual pens. In experiment 1, the effects of the method of castration were investigated (experimental groups C, IC and EMG). In experiment 2, the effects of housing on entire male pigs were evaluated (experimental groups EMG and EMP). All pigs had ad libitum access to standard diets from weaning to 107 kg BW. The two vaccinations (Improvac®) were applied to the IC pigs at an average BW of 22.6 and 73.0 kg. In experiment 1, average daily gain (ADG) did not (P > 0.05) differ among the experimental groups. However, EMG consumed less feed and had a better feed-conversion ratio than C (P 0.05) differ between EMP and EMG. However, EMP pigs consumed more feed than EMG pigs and had a poorer feed efficiency (P < 0.01 for each). In conclusion, EMG pigs had a better feed efficiency than IC pigs and their carcasses were leaner, but the risk of boar tainted pork was elevated. Group-housing negatively affected average daily feed intake but not ADG of entire males. At the moment, immunocastration offers a good approach to avoid castration and minimize the risk of boar tain

Efecto de la inclusión de aceite esencial de orégano en la dieta de lechones destetados sobre parámetros productivos

The aim of this study was to evaluate the effect of the supplementation of essential oil of oregano on the productive parameters in weaned piglets. The study was carried out in a commercial pig farm in Ventanilla, Callao, Peru. The supplementation was for 12 days. One hundred and twenty piglets randomly allocated in 8 pens of 15 animals were distributed in two treatments: T1, control, with a pre-start diet with 18% protein, 600 ppm amoxicillin and 55 ppm carbadox; T2, diet as in T1 plus supplementation with 500 ppm of oregano essential oil (Origanum vulgare). The weight gain, feed consumption and feed conversion ratio were evaluated. A lower feed intake was found in T2 (1.58 kg) compared to T1 (1.84 kg) (p &lt;0.05). The weight gain and the feed conversion index were not affected by the treatments.El estudio tuvo como objetivo evaluar el efecto de la suplementación de aceite esencial de orégano sobre los parámetros productivos en el posdestete de lechones. El trabajo se realizó en una granja comercial porcina en Ventanilla, Callao, Perú. La suplementación fue por 12 días. Se utilizaron 120 lechones distribuidos de manera aleatoria en 8 corrales de 15 animales. Los tratamientos fueron: T1, control, con una dieta de pre-inicio con 18% de proteína, 600 ppm de amoxicilina y 55 ppm de carbadox; T2, dieta como en T1 más suplementación con 500 ppm de aceite esencial de orégano (Origanum vulgare). Se evaluó la ganancia de peso, consumo de alimento e índice de conversión alimenticia. Se halló un menor consumo de alimento en T2 (1.58 kg) respecto a T1 (1.84 kg) (p&lt;0.05). La ganancia de peso y el índice de conversión alimenticia no se vieron afectados por los tratamientos

A phase coherence approach to identifying co-located earthquakes and tremor

We present and use a phase coherence approach to identify seismic signals that have similar path effects but different source time functions: co-located earthquakes and tremor. The method used is a phase coherence-based implementation of empirical matched field processing, modified to suit tremor analysis. It works by comparing the frequency-domain phases of waveforms generated by two sources recorded at multiple stations. We first cross-correlate the records of the two sources at a single station. If the sources are co-located, this cross-correlation eliminates the phases of the Green’s function. It leaves the relative phases of the source time functions, which should be the same across all stations so long as the spatial extent of the sources are small compared with the seismic wavelength. We therefore search for cross-correlation phases that are consistent across stations as an indication of co-located sources. We also introduce a method to obtain relative locations between the two sources, based on back-projection of interstation phase coherence. We apply this technique to analyse two tremor-like signals that are thought to be composed of a number of earthquakes. First, we analyse a 20 s long seismic precursor to a M 3.9 earthquake in central Alaska. The analysis locates the precursor to within 2 km of the mainshock, and it identifies several bursts of energy—potentially foreshocks or groups of foreshocks—within the precursor. Second, we examine several minutes of volcanic tremor prior to an eruption at Redoubt Volcano. We confirm that the tremor source is located close to repeating earthquakes identified earlier in the tremor sequence. The amplitude of the tremor diminishes about 30 s before the eruption, but the phase coherence results suggest that the tremor may persist at some level through this final interval

On the initiation of sustained slip-weakening ruptures by localized stresses

Numerical simulations of dynamic earthquake rupture require an artificial initiation procedure, if they are not integrated in long-term earthquake cycle simulations. A widely applied procedure involves an ‘overstressed asperity’, a localized region stressed beyond the static frictional strength. The physical properties of the asperity (size, shape and overstress) may significantly impact rupture propagation. In particular, to induce a sustained rupture the asperity size needs to exceed a critical value. Although criteria for estimating the critical nucleation size under linear slip-weakening friction have been proposed for 2-D and 3-D problems based on simplifying assumptions, they do not provide general rules for designing 3-D numerical simulations. We conduct a parametric study to estimate parameters of the asperity that minimize numerical artefacts (e.g. changes of rupture shape and speed, artificial supershear transition, higher slip-rate amplitudes). We examine the critical size of square, circular and elliptical asperities as a function of asperity overstress and background (off-asperity) stress. For a given overstress, we find that asperity area controls rupture initiation while asperity shape is of lesser importance. The critical area obtained from our numerical results contrasts with published theoretical estimates when background stress is low. Therefore, we derive two new theoretical estimates of the critical size under low background stress while also accounting for overstress. Our numerical results suggest that setting the asperity overstress and area close to their critical values eliminates strong numerical artefacts even when the overstress is large. We also find that properly chosen asperity size or overstress may significantly shorten the duration of the initiation. Overall, our results provide guidelines for determining the size of the asperity and overstress to minimize the effects of the forced initiation on the subsequent spontaneous rupture propagation