71 research outputs found
A Combined Compton and Coded-aperture Telescope for Medium-energy Gamma-ray Astrophysics
A future mission in medium-energy gamma-ray astrophysics would allow for many
scientific advancements, e.g. a possible explanation for the excess positron
emission from the Galactic Center, a better understanding of nucleosynthesis
and explosion mechanisms in Type Ia supernovae, and a look at the physical
forces at play in compact objects such as black holes and neutron stars.
Additionally, further observation in this energy regime would significantly
extend the search parameter space for low-mass dark matter. In order to achieve
these objectives, an instrument with good energy resolution, good angular
resolution, and high sensitivity is required. In this paper we present the
design and simulation of a Compton telescope consisting of cubic-centimeter
Cadmium Zinc Telluride (CdZnTe) detectors as absorbers behind a silicon tracker
with the addition of a passive coded mask. The goal of the design was to create
a very sensitive instrument that is capable of high angular resolution. The
simulated telescope showed achievable energy resolutions of 1.68 FWHM at
511 keV and 1.11 at 1809 keV, on-axis angular resolutions in Compton mode
of 2.63 FWHM at 511 keV and 1.30 FWHM at 1809 keV, and is
capable of resolving sources to at least 0.2 at lower energies with
the use of the coded mask. An initial assessment of the instrument in Compton
imaging mode yields an effective area of 183 cm at 511 keV and an
anticipated all-sky sensitivity of 3.6 x 10 photons cm s
for a broadened 511 keV source over a 2-year observation time. Additionally,
combining a coded mask with a Compton imager to improve point source
localization for positron detection has been demonstrated
Recommended from our members
Three-Dimensional Position-Sensitive Germanium Detectors
Critical to the DOE effort to deactivate and decommission the weapons complex facilities is the characterization of contaminated equipment and building structures. This characterization includes the isotopic identification of radioactive contaminants and the spatial mapping of these deposits. The penetrating nature of the gamma rays emitted by the radioactive contaminants provides a means to accomplish this task in a passive, non-destructive and non-intrusive manner. Through conventional gamma-ray spectroscopy, the radioactive isotopes in the contaminants can be identified by their characteristic gamma-ray signatures and the amount of each isotope by the intensity of the signature emission. With the addition of gamma ray imaging, the spatial distributions of the isotopes can simultaneously be obtained. The ability to image radioactive contaminants can reduce waste as well as help ensure the adequate protection of workers and the environment. For example, if equipment and building materials have been subjected to radionuclide contamination, the entire structure must be treated as radioactive waste during demolition. However, only partial removal may be necessary if the contamination can be accurately located and identified. Hand-held survey instrumentation operated in the near vicinity of the contaminated objects is a common method to accomplish this task. This method necessitates long data acquisition times, direct close access, and considerable worker exposure, as well as leads to imprecise information. In contrast, imaging devices operated at a distance from the contaminated objects can accurately acquire the spatially dependent gamma-ray emission information in a single measurement. Consequently, the devices can more efficiently discriminate between contaminated and non-contaminated areas of heterogeneous objects while at the same time reducing worker exposure
Recommended from our members
Three-Dimensional Position-Sensitive Geranium Detectors
A critical component of the DOE decontamination and decommissioning effort is the characterization of radioactively contaminated equipment and structures. Gamma-ray spectroscopy and imaging with germanium (Ge) based detectors are powerful techniques that allow for the quick and accurate in-situ identification, spatial mapping, and quantification of radioactive contaminants. However, the image resolution obtained with a Ge detector can be limited by the accuracy to which the gamma-ray interaction events are spatially detected within the detector itself. Our primary objective is to develop the technologies necessary to produce Ge gamma-ray detectors with enhanced accuracy in locating gamma-ray interaction events thereby resulting in improved image resolution. Our approach is to locate the gamma ray interaction events within the detector in all three dimensions rather than just two. Additionally, we will base the detectors on known and tested LBNL fabrication technologies and utilize the simplest possible detector geometries and signal-readout electrode structures in order to reduce the system complexity and difficulties in fabrication. The technologies developed as a result of this research will form the basis for the design and construction of future high-performance gamma-ray imaging systems. These instruments will greatly facilitate DOE's radioactive materials characterization process
Recommended from our members
Germanium-Based Detectors for Gamma-Ray Imaging andSpectroscopy
Germanium-based detectors are the standard technology usedfor gamma-ray spectroscopy when high efficiency and excellent energyresolution are desired. By dividing the electrical contacts on thesedetectors into segments, the locations of the gamma-ray interactionevents within the detectors can be determined as well as the depositedenergies. This enables simultaneous gamma-ray imaging and spectroscopyand leads to applications in the areas of astronomy, nuclear physics,environmental remediation, nuclear nonproliferation, and homelandsecurity. Producing the fine-pitched electrode segmentation oftenrequired for imaging has been problematic in the past. To address thisissue, we have developed an amorphous-semiconductor contact technology.Using this technology, fully passivated detectors with closely spacedcontacts can be produced using a simple fabrication process. The currentstate of the amorphous-semiconductor contact technology and thechallenges that remain will be given in this paper
Recommended from our members
Comparative genomics of Czech vaccine strains of Bordetella pertussis.
Bordetella pertussis is a strictly human pathogen causing the respiratory infectious disease called whooping cough or pertussis. B. pertussis adaptation to acellular pertussis vaccine pressure has been repeatedly highlighted, but recent data indicate that adaptation of circulating strains started already in the era of the whole cell pertussis vaccine (wP) use. We sequenced the genomes of five B. pertussis wP vaccine strains isolated in the former Czechoslovakia in the pre-wP (1954-1957) and early wP (1958-1965) eras, when only limited population travel into and out of the country was possible. Four isolates exhibit a similar genome organization and form a distinct phylogenetic cluster with a geographic signature. The fifth strain is rather distinct, both in genome organization and SNP-based phylogeny. Surprisingly, despite isolation of this strain before 1966, its closest sequenced relative appears to be a recent isolate from the US. On the genome content level, the five vaccine strains contained both new and already described regions of difference. One of the new regions contains duplicated genes potentially associated with transport across the membrane. The prevalence of this region in recent isolates indicates that its spread might be associated with selective advantage leading to increased strain fitness
Microscopic theory of single-electron tunneling through molecular-assembled metallic nanoparticles
We present a microscopic theory of single-electron tunneling through metallic
nanoparticles connected to the electrodes through molecular bridges. It
combines the theory of electron transport through molecular junctions with the
description of the charging dynamics on the nanoparticles. We apply the theory
to study single-electron tunneling through a gold nanoparticle connected to the
gold electrodes through two representative benzene-based molecules. We
calculate the background charge on the nanoparticle induced by the charge
transfer between the nanoparticle and linker molecules, the capacitance and
resistance of molecular junction using a first-principles based Non-Equilibrium
Green's Function theory. We demonstrate the variety of transport
characteristics that can be achieved through ``engineering'' of the
metal-molecule interaction.Comment: To appear in Phys. Rev.
- …