Theoretical analysis of heat and mass transfer processes in an evaporative cooling system with zeolite desiccant powered by solar energy

[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Concerns about energy sources depletion and environmental pollution issues have been raised and is a top priority of the global community. Refrigeration machines have been received the major of attention because of their energy consumption and pollution. Different from traditional cooling strategies, desiccant cooling technology (DCT) has been emergent as a promising alternative giving the fact that the economic-ecological air conditioning system is not restricted to hot and dry climates only. In the current experimental study, an advancement solar assisted desiccant cooling system (SADCS) is presented. The advantage is to use only a fraction of the energy of typical compressor-based cooling systems. The advancements have taken place into the dehumidification, evaporator, and regeneration sections. The role of appropriate choosing of the desiccant material type on the adsorption process has been presented, and a Faujasite (FAU) 13X zeolite is utilized in the dehumidification stage. A novel monolayer coating method has conducted. The new coating method has insured no external water vapor condensation ruins the desiccant material during relative humidity working range (20-97) %. Moreover, the new coating method allows to increase the performance of the adsorption and desorption processes, respectively. By giving the coming air stream the ability to pass through and surround the zeolite beads, accessibility to adsorb and desorb water vapor molecules is easier as more rooms are available. That clearly has been stated as 6450 g of zeolite holds 684 g of water in full saturation status within 37 minutes and regenerates by less than 120 [degree]C air temperature within 66 minutes. In the evaporative cooling section, an effective small compact evaporative cooler (CEC) system dealing only with product flow is introduced. The new CEC is utilized direct and indirect evaporation of water mechanisms combined in cross channels to cool air. Dropping air temperature by (5-7) [degree]C has recorded without desiccant stage. Supplying the required regeneration energy from a green energy source was essential in this study. For this purpose, an innovative flat plate double-mesh air solar collector has designed and carried out. In the new collector, a double copper mesh frames were fixing within a double Plexiglas covers flat plate collector. Experimental results show a good consistent with the mathematical model. With an average 0.71 solar fraction and 80 [degree]C exit air temperature, the collector presents 0.73 as thermal efficiency. As the improvements of the desiccant air-conditioning system turns out globally recognized by the progress in different research outcomes, designs, setting up and evaluation methods, it is expected that the system will be one of the most important alternative systems for the maintenance of human's environment comfort and air quality when considering the reduced dependence on conventional energy usage. Present work and results provide a reference data sets related to real adsorption dehumidification process and show that the advancement SADCS has a great potential in the future of the evaporative cooler systems

Legitimacy of the Local Thermal Equilibrium Hypothesis in Porous Media: A Comprehensive Review

Local thermal equilibrium (LTE) is a frequently-employed hypothesis when analysing convection heat transfer in porous media. However, investigation of the non-equilibrium phenomenon exhibits that such hypothesis is typically not true for many circumstances such as rapid cooling or heating, and in industrial applications involving immediate transient thermal response, leading to a lack of local thermal equilibrium (LTE). Therefore, for the sake of appropriately conduct the technological process, it has become necessary to examine the validity of the LTE assumption before deciding which energy model should be used. Indeed, the legitimacy of the LTE hypothesis has been widely investigated in different applications and different modes of heat transfer, and many criteria have been developed. This paper summarises the studies that investigated this hypothesis in forced, free, and mixed convection, and presents the appropriate circumstances that can make the LTE hypothesis to be valid. For example, in forced convection, the literature shows that this hypothesis is valid for lower Darcy number, lower Reynolds number, lower Prandtl number, and/or lower solid phase thermal conductivity; however, it becomes invalid for higher effective fluid thermal conductivity and/or lower interstitial heat transfer coefficient

Legitimacy of the local thermal equilibrium hypothesis in porous media: A comprehensive review

Local thermal equilibrium (LTE) is a frequently-employed hypothesis when analysing convection heat transfer in porous media. However, investigation of the non-equilibrium phenomenon exhibits that such hypothesis is typically not true for many circumstances such as rapid cooling or heating, and in industrial applications involving immediate transient thermal response, leading to a lack of local thermal equilibrium (LTE). Therefore, for the sake of appropriately conduct the technological process, it has become necessary to examine the validity of the LTE assumption before deciding which energy model should be used. Indeed, the legitimacy of the LTE hypothesis has been widely investigated in different applications and different modes of heat transfer, and many criteria have been developed. This paper summarises the studies that investigated this hypothesis in forced, free, and mixed convection, and presents the appropriate circumstances that can make the LTE hypothesis to be valid. For example, in forced convection, the literature shows that this hypothesis is valid for lower Darcy number, lower Reynolds number, lower Prandtl number, and/or lower solid phase thermal conductivity; however, it becomes invalid for higher effective fluid thermal conductivity and/or lower interstitial heat transfer coefficient.</p

Advancements in Liquid Desiccant Technologies: A Comprehensive Review of Materials, Systems, and Applications

Desiccant agents (DAs) have drawn much interest from researchers and businesses because they offer a potential method for lowering environmental impact, increasing energy efficiency, and controlling humidity. As a result, they provide a greener option to conventional air conditioning systems. This review thoroughly analyzes current issues, obstacles, and future advancements in liquid desiccant agents (LDAs) for drying, air conditioning, and dehumidification applications. The importance of LDAs in lowering energy use and greenhouse gas emissions is highlighted, emphasizing their potential for environmentally friendly humidity control. The current review examines key parameters such as novel materials, enhancing desiccant qualities, integration with technologies, and long-term durability while examining recent developments in LDAs and investigating their applications in diverse industries. The main conclusions from the evaluated publications in this review are also highlighted, including developments in LDAs, new applications, and developing research fields. Overall, this review advances knowledge of LDAs and their potential to shift humidity control systems toward sustainability and energy efficiency

Nano-Iron Oxide-Ethylene Glycol-Water Nanofluid Based Photovoltaic Thermal (PV/T) System with Spiral Flow Absorber: An Energy and Exergy Analysis

Both electrical and thermal efficiencies combine in determining and evaluating the performance of a PV/T collector. In this study, two PV/T systems consisting of poly and monocrystalline PV panels were used, which are connected from the bottom by a heat exchanger consisting of a spiral tube through which a nanofluid circulates. In this study, a base fluid, water, and ethylene glycol were used, and iron oxide nanoparticles (nano-Fe2O3) were used as an additive. The mixing was carried out according to the highest specifications adopted by the researchers, and the thermophysical properties of the fluid were carefully examined. The prepared nanofluid properties showed a limited effect of the nanoparticles on the density and viscosity of the resulting fluid. As for the thermal conductivity, it increased by increasing the mass fraction added to reach 140% for the case of adding 2% of nano-Fe2O3. The results of the zeta voltage test showed that the supplied suspensions had high stability. When a mass fraction of 0.5% nano-Fe2O3 was added the zeta potential was 68 mV, while for the case of 2%, it reached 49 mV. Performance tests showed a significant increase in the efficiencies with increased mass flow rate. It was found when analyzing the performance of the two systems for nanofluid flow rates from 0.08 to 0.17 kg/s that there are slight differences between the monocrystalline, and polycrystalline systems operating in the spiral type of exchanger. As for the case of using monocrystalline PV the electrical, thermal, and total PV/T efficiencies with 2% added Fe2O3 ranged between 10% to 13.3%, 43–59%, and 59 to 72%, respectively, compared to a standalone PV system. In the case of using polycrystalline PV, the electrical, thermal, and total PV/T efficiencies ranged from 11% to 13.75%, 40.3% to 63%, and 55.5% to 77.65%, respectively, compared to the standalone PV system. It was found that the PV/T electrical exergy was between 45, and 64 W with thermal exergy ranged from 40 to 166 W, and total exergy from 85 to 280 W, in the case of using a monocrystalline panel. In the case of using polycrystalline, the PV/T electrical, thermal, and total exergy were between 45 and 66 W, 42–172 W, and 85–238 W, respectively. The results showed that both types of PV panels can be used in the harsh weather conditions of the city of Baghdad with acceptable, and efficient productivity

Nano-Iron Oxide-Ethylene Glycol-Water Nanofluid Based Photovoltaic Thermal (PV/T) System with Spiral Flow Absorber: An Energy and Exergy Analysis

Both electrical and thermal efficiencies combine in determining and evaluating the performance of a PV/T collector. In this study, two PV/T systems consisting of poly and monocrystalline PV panels were used, which are connected from the bottom by a heat exchanger consisting of a spiral tube through which a nanofluid circulates. In this study, a base fluid, water, and ethylene glycol were used, and iron oxide nanoparticles (nano-Fe2O3) were used as an additive. The mixing was carried out according to the highest specifications adopted by the researchers, and the thermophysical properties of the fluid were carefully examined. The prepared nanofluid properties showed a limited effect of the nanoparticles on the density and viscosity of the resulting fluid. As for the thermal conductivity, it increased by increasing the mass fraction added to reach 140% for the case of adding 2% of nano-Fe2O3. The results of the zeta voltage test showed that the supplied suspensions had high stability. When a mass fraction of 0.5% nano-Fe2O3 was added the zeta potential was 68 mV, while for the case of 2%, it reached 49 mV. Performance tests showed a significant increase in the efficiencies with increased mass flow rate. It was found when analyzing the performance of the two systems for nanofluid flow rates from 0.08 to 0.17 kg/s that there are slight differences between the monocrystalline, and polycrystalline systems operating in the spiral type of exchanger. As for the case of using monocrystalline PV the electrical, thermal, and total PV/T efficiencies with 2% added Fe2O3 ranged between 10% to 13.3%, 43&ndash;59%, and 59 to 72%, respectively, compared to a standalone PV system. In the case of using polycrystalline PV, the electrical, thermal, and total PV/T efficiencies ranged from 11% to 13.75%, 40.3% to 63%, and 55.5% to 77.65%, respectively, compared to the standalone PV system. It was found that the PV/T electrical exergy was between 45, and 64 W with thermal exergy ranged from 40 to 166 W, and total exergy from 85 to 280 W, in the case of using a monocrystalline panel. In the case of using polycrystalline, the PV/T electrical, thermal, and total exergy were between 45 and 66 W, 42&ndash;172 W, and 85&ndash;238 W, respectively. The results showed that both types of PV panels can be used in the harsh weather conditions of the city of Baghdad with acceptable, and efficient productivity

Parameters Affecting the Efficiency of Solar Stills&mdash;Recent Review

Although water is the second most important fluid, after air, found on the Earth, there is a vital problem in the availability of water for many organisms, and this problem faces the whole world. As a result, scientists have developed many methods of purifying the saline/brackish water to be suitable for different uses in addition to the purpose of drinking. Fortunately, solar distillation is very rewarding in terms of operating costs and costs for a liter of freshwater distillated with using clean and environmentally friendly energy. Solar distiller is one of the solar distillation systems devices, which is simple in construction, cheap, and easy to use but it has the drawback of low productivity. This article aims to provide a summary of the different ideas and works on solar stills through different variables that affect the performance of distillers. In contrast to the review papers dealing with this topic, this paper contains comprehensive and complete details and careful reviews of all the variables that affect the performance of distillers. Therefore, it is like a ladder in front of the authors until they reach the recent of what has been studied on the distillers in a simplified way to save time and effort, which will help them to come up with different ideas that were not easily studied. Thus, this paper introduces an overview on the detailed parameters affecting the performance of solar stills. These parameters are climatic, design, and operating factors. Climatic factors consist of solar radiation, ambient temperature, air speed, and dusty and cloudy weather. While the design factors include the evaporative and exposure surface areas, glazing cover material, inclination, and thickness, distiller material, and of insulating material and thickness. Whist, the operating parameters consist of the water temperature, feed water temperature, applying vacuum, temperature difference between water and glass cover, and hybrid systems. From the extensive literature, it is concluded that the climatic, design, and operating factors significantly affect the performance of the solar still. Finally, some points are proposed for further investigation

Parameters Affecting the Efficiency of Solar Stills—Recent Review

Although water is the second most important fluid, after air, found on the Earth, there is a vital problem in the availability of water for many organisms, and this problem faces the whole world. As a result, scientists have developed many methods of purifying the saline/brackish water to be suitable for different uses in addition to the purpose of drinking. Fortunately, solar distillation is very rewarding in terms of operating costs and costs for a liter of freshwater distillated with using clean and environmentally friendly energy. Solar distiller is one of the solar distillation systems devices, which is simple in construction, cheap, and easy to use but it has the drawback of low productivity. This article aims to provide a summary of the different ideas and works on solar stills through different variables that affect the performance of distillers. In contrast to the review papers dealing with this topic, this paper contains comprehensive and complete details and careful reviews of all the variables that affect the performance of distillers. Therefore, it is like a ladder in front of the authors until they reach the recent of what has been studied on the distillers in a simplified way to save time and effort, which will help them to come up with different ideas that were not easily studied. Thus, this paper introduces an overview on the detailed parameters affecting the performance of solar stills. These parameters are climatic, design, and operating factors. Climatic factors consist of solar radiation, ambient temperature, air speed, and dusty and cloudy weather. While the design factors include the evaporative and exposure surface areas, glazing cover material, inclination, and thickness, distiller material, and of insulating material and thickness. Whist, the operating parameters consist of the water temperature, feed water temperature, applying vacuum, temperature difference between water and glass cover, and hybrid systems. From the extensive literature, it is concluded that the climatic, design, and operating factors significantly affect the performance of the solar still. Finally, some points are proposed for further investigation