Battery-Conscious, Economic, and Prioritization-Based Electric Vehicle Residential Scheduling

Advances in communication technologies and protocols among vehicles, charging stations, and controllers have enabled the application of scheduling techniques to prioritize EV fleet charging. From the perspective of users, residential EV charging must particularly address cost-effective solutions to use energy more efficiently and preserve the lifetime of the battery—the most expensive element of an EV. Considering this matter, this research addresses a residential EV charging scheduling model including battery degradation aspects when discharging. Due to the non-linear characteristics of charging and battery degradation, we consider a mixed integer non-linearly constrained formulation with the aim of scheduling the charging and discharging of EVs to satisfy the following goals: prioritizing charging, reducing charging costs and battery degradation, and limiting the power demand requested to the distribution transformer. The results shows that, when EVs are discharged before charging up within a specific state-of-charge range, degradation can be reduced by 5.3%. All charging requests are completed before the next-day departure time, with 16.35% cost reduction achieved by scheduling charging during lower tariff prices, in addition to prevention of overloading of the distribution transformer

Multi-objective analysis of impacts of distributed generation placement on the operational characteristics of networks for distribution system planning

Recent advances in energy technology generation and new directions in electricity regulation have made distributed generation (DG) more widespread, with consequent significant impacts on the operational characteristics of distribution networks. For this reason, new methods for identifying such impacts are needed, together with research and development of new tools and resources to maintain and facilitate continued expansion towards DG. This paper presents a study aimed at determining appropriate DG sites for distribution systems. The main considerations which determine DG sites are also presented, together with an account of the advantages gained from correct DG placement. The paper intends to define some quantitative and qualitative parameters evaluated by Digsilent (R), GARP3 (R) and DSA-GD software. A multi-objective approach based on the Bellman-Zadeh algorithm and fuzzy logic is used to determine appropriate DG sites. The study also aims to find acceptable DG locations both for distribution system feeders, as well as for nodes inside a given feeder. (C) 2010 Elsevier Ltd. All rights reserved.CEEE-DCAPE

European Association for the Development of Renewable Energies, Environment and Power Quality (EA4EPQ) International Conference on Renewable Energies and Power Quality (ICREPQ'12) Santiago de Compostela A Parallel Approach for Real-Time Power Flow in Dist

Abstract The new reality of smart distribution systems with use of generation sources of small and medium sizes brings new challenges for the operation of these systems. The complexity and the large number of nodes requires use of methods which can reduce the processing time of algorithms such as power flow, allowing its use in real time. This paper presents a known methodology for calculating the power flow in three phases using backward/forward sweep method, and also considering others network elements such as voltage regulators, shunt capacitors and sources of dispersed generation PV and PQ. After that, new elements are introduced that allow the parallelization of this algorithm and an adequate distribution of work between the available processors. The algorithm was implemented using a multi-tiered architecture which allows its use even in environments with low processing power, such as smartphones and tablets, and the processing times were measured in many network configurations and compared with the same algorithm in the serial version

Non-Hardware-Based Non-Technical Losses Detection Methods: A Review

Non-Technical Losses (NTL) represent a serious concern for electric companies. These losses are responsible for revenue losses, as well as reduced system reliability. Part of the revenue loss is charged to legal consumers, thus, causing social imbalance. NTL methods have been developed in order to reduce the impact in physical distribution systems and legal consumers. These methods can be classified as hardware-based and non-hardware-based. Hardware-based methods need an entirely new system infrastructure to be implemented, resulting in high investment and increased cost for energy companies, thus hampering implementation in poorer nations. With this in mind, this paper performs a review of non-hardware-based NTL detection methods. These methods use distribution systems and consumers’ data to detect abnormal energy consumption. They can be classified as network-based, which use network technical parameters to search for energy losses, data-based methods, which use data science and machine learning, and hybrid methods, which combine both. This paper focuses on reviewing non-hardware-based NTL detection methods, presenting a NTL detection methods overview and a literature search and analysis