10 research outputs found
Calibration of Thermal Dissipation Probes for Date Palm (Phoenix dactylifera L.)
The quantification of water flow through the stem is vital for date palm (Phoenix dactylifera L.) to promote a good water stress management. The thermal dissipation probe (TDP) method developed by Granier is widely used to evaluate transpiration of forest trees; however, there are contradictory reports regarding its reliability. Considerable errors in estimated sap flux density, which might be due to a lack ofspecies-specific calibrations. The TDP method uses a mathematical model that is based on an empirical equation to estimate sap flux density, which is claimed to be applicable to all tree species, independently of wood structure and anatomy. At the laboratory, we compared the rate of water uptake by cut stems with sap flux estimates derived from the TDP method to assess the validity of the method.Our calibration results were considerably different compared to the Granier’s original equation. Moreover, sap flux density was overestimated by 18.2 ± 0.5% when the original calibration parameters of Granierare employed. However, using new calibration parameters improved the accuracy of sap flow measurements. Our results indicated that it is not appropriate to use a general equation for different species. Therefore, previous estimations of date palm’s water requirement through thermal dissipation probes should be revised
Calibration of Thermal Dissipation Probes for Date Palm (Phoenix dactylifera L.)
The quantification of water flow through the stem is vital for date palm (Phoenix dactylifera L.) to promote a good water stress management. The thermal dissipation probe (TDP) method developed by Granier is widely used to evaluate transpiration of forest trees; however, there are contradictory reports regarding its reliability. Considerable errors in estimated sap flux density, which might be due to a lack ofspecies-specific calibrations. The TDP method uses a mathematical model that is based on an empirical equation to estimate sap flux density, which is claimed to be applicable to all tree species, independently of wood structure and anatomy. At the laboratory, we compared the rate of water uptake by cut stems with sap flux estimates derived from the TDP method to assess the validity of the method.Our calibration results were considerably different compared to the Granier’s original equation. Moreover, sap flux density was overestimated by 18.2 ± 0.5% when the original calibration parameters of Granierare employed. However, using new calibration parameters improved the accuracy of sap flow measurements. Our results indicated that it is not appropriate to use a general equation for different species. Therefore, previous estimations of date palm’s water requirement through thermal dissipation probes should be revised
Effect of Pb-Contaminated Water on <em>Ludwigia stolonifera</em> (Guill. & Perr.) P.H. Raven Physiology and Phytoremediation Performance
A laboratory experiment was led to examine the lead bioaccumulation capacity of Ludwigia stolonifera (Guill. & Perr.) exposed to various Pb concentrations (0, 10, 25, 50, and 100 mg/L) for 1, 3, 5, and 7 days. The lead accumulation increased as the metal concentrations in the solution increased and over time, to an extreme accretion of 6840 mg/kg DW(dry weight) at 100 mg/L of lead on the 10 days exposure. The proportion removal efficiency, translocation factor, and bioconcentration factor of the plant were assessed. The maximum bioconcentration factor values (1981.13) indicate that the plant was a Pb hyperaccumulator, and translocation factor values (1.85), which are >1, indicate fit of L. stolonifera for eliminating Pb in Pb-contaminated water. Photosynthetic pigments were decreased with increase of Pb concentration and time exposure. Total chlorophyll content and Chl a/b ratio lowered to between 46 and 62% at 100 mg/L Pb after 10 days exposure. Protein content and soluble carbohydrate indicated a similar trend, which showed the highest decrease (7.26 and 36.2 mg/g FW(fresh weight), respectively) at 100 mg/L of Pb after 10 days. The activity of the antioxidant enzymes superoxide dismutase, ascorbate, and peroxidase was increased significantly in comparison to the control. The results indicate that L. stolonifera is a newly recognized Pb hyperaccumulator (6840 mg/kg DW), but physiological status indicates that the plant is not tolerant to high Pb concentrations
Effect of Organic and Inorganic Fertilizers on Soil Properties, Growth Yield, and Physiochemical Properties of Sunflower Seeds and Oils
Sunflower is the most important source of edible oil and fourth-largest oilseed crop in the world. The purpose of this study was to investigate the effect of using two organic fertilizers from various sources (compost coupled with biofertilizer (CCB), filter mud cake (FMC)) and comparing them to conventional inorganic fertilizers in their effect on the quality of sunflower seeds, sunflower oil, and soil properties. The data showed that the highest value of dry weight, plant height, disk dry weight in addition to chlorophyll content, and phenolic secondary metabolites in oil was measured after the application of inorganic fertilizer, while the use of organic fertilizer contributed to a substantial increase in the production yield of sunflower seeds, oil, and a high stalk yield compared with inorganic treatment. Oils produced from organic fertilizer (CCB and FMC) gave higher blue color values than inorganic ones and the most transparent oil was inorganic while the organic treatments produced darkest oils. The results for chemical composition of sunflower seeds showed nonsignificant differences for protein and ash among all treatments while a significant difference with regard to oil content was recorded, in which the FMC recorded the highest oil content followed by compost (CCB), and finally came the inorganic treatment. Organic fertilizers are a valuable source of organic material and nutrients essential for plants and can be safely used for soil, crops, and the environment
Effect of Organic and Inorganic Fertilizers on Soil Properties, Growth Yield, and Physiochemical Properties of Sunflower Seeds and Oils
Sunflower is the most important source of edible oil and fourth-largest oilseed crop in the world. The purpose of this study was to investigate the effect of using two organic fertilizers from various sources (compost coupled with biofertilizer (CCB), filter mud cake (FMC)) and comparing them to conventional inorganic fertilizers in their effect on the quality of sunflower seeds, sunflower oil, and soil properties. The data showed that the highest value of dry weight, plant height, disk dry weight in addition to chlorophyll content, and phenolic secondary metabolites in oil was measured after the application of inorganic fertilizer, while the use of organic fertilizer contributed to a substantial increase in the production yield of sunflower seeds, oil, and a high stalk yield compared with inorganic treatment. Oils produced from organic fertilizer (CCB and FMC) gave higher blue color values than inorganic ones and the most transparent oil was inorganic while the organic treatments produced darkest oils. The results for chemical composition of sunflower seeds showed nonsignificant differences for protein and ash among all treatments while a significant difference with regard to oil content was recorded, in which the FMC recorded the highest oil content followed by compost (CCB), and finally came the inorganic treatment. Organic fertilizers are a valuable source of organic material and nutrients essential for plants and can be safely used for soil, crops, and the environment
Calibration of Thermal Dissipation Probes for Date Palm (<i>Phoenix dactylifera</i> L.)
The quantification of water flow through the stem is vital for date palm (Phoenix dactylifera L.) to promote a good water stress management. The thermal dissipation probe (TDP) method developed by Granier is widely used to evaluate transpiration of forest trees; however, there are contradictory reports regarding its reliability. Considerable errors in estimated sap flux density, which might be due to a lack ofspecies-specific calibrations. The TDP method uses a mathematical model that is based on an empirical equation to estimate sap flux density, which is claimed to be applicable to all tree species, independently of wood structure and anatomy. At the laboratory, we compared the rate of water uptake by cut stems with sap flux estimates derived from the TDP method to assess the validity of the method.Our calibration results were considerably different compared to the Granier’s original equation. Moreover, sap flux density was overestimated by 18.2 ± 0.5% when the original calibration parameters of Granierare employed. However, using new calibration parameters improved the accuracy of sap flow measurements. Our results indicated that it is not appropriate to use a general equation for different species. Therefore, previous estimations of date palm’s water requirement through thermal dissipation probes should be revised
Antimicrobial and Antioxidant Properties of Total Polyphenols of Anchusa italica Retz
Anchusa italica Retz has been used for a long time in phytotherapy. The aim of the present study was to determine the antioxidant and antibacterial activities of extracts from the leaves and roots of Anchusa italica Retz. We first determined the content of phenolic compounds and flavonoids using Folin–Ciocalteu reagents and aluminum chloride (AlCl3). The antioxidant activity was determined using three methods: reducing power (FRAP), 2.2-diphenyl-1-picrylhydrazyl (DPPH), total antioxidant capacity (TAC). The antimicrobial activity was investigated against four strains of Escherichia coli, two strains of Klebsiella pneumoniae and coagulase-negative Staphylococcus, and one fungal strain of Candida albicans. The results showed that the root extract was rich in polyphenols (43.29 mg GAE/g extract), while the leave extract was rich in flavonoids (28.88 mg QE/g extract). The FRAP assay showed a strong iron reduction capacity for the root extract (IC50 of 0.11 µg/mL) in comparison to ascorbic acid (IC50 of 0.121 µg/mL). The DPPH test determined an IC50 of 0.11 µg/mL for the root extract and an IC50 of 0.14 µg/mL for the leaf extract. These values are low compared to those for ascorbic acid (IC50 of 0.16 µg/mL) and BHT (IC50 0.20 µg/mL). The TAC values of the leaf and root extracts were 0.51 and 0.98 mg AAE/g extract, respectively. In vitro, the extract showed inhibitory activity against all strains studied, with diameters of zones of inhibition in the range of 11.00–16.00 mm for the root extract and 11.67–14.33 mm for the leaf extract. The minimum inhibitory concentration was recorded for the leaf extract against E. coli (ATB:57), corresponding to 5 mg/mL. Overall, this research indicates that the extracts of Anchusa italica Retz roots and leaves exert significant antioxidant and antibacterial activities, probably because of the high content of flavonoids and polyphenols
Effects of Arbuscular Mycorrhizal Inoculation by Indigenous Fungal Complexes on the Morpho-Physiological Behavior of Argania spinosa Subjected to Water Deficit Stress
Our objective is to test selected mycorrhizal complexes to verify the contribution of mycorrhizal symbiosis as a biological tool promoting the development of the argan tree under hostile conditions. In addition, this study aims to assess the impact of soil drought caused by stopping watering of young argan plants inoculated with strains of fungal complexes indigenous to the species in comparison to non-inoculated plants. Under conditions of water deficit stress, the most marked reductions in fresh and dry biomass were recorded in non-mycorrhizal plants. The most negative values of leaf water potential Ψf and Ψb were also noted in non-mycorrhizal plants. On the other hand, plants inoculated with mycorrhizal Bouyzakarne inoculum were relatively less affected by watering discontinuation compared to those inoculated with mycorrhizal Argana inoculum. Water stress caused a reduction in potassium and phosphorus content in the leaves and roots of all plants. However, mycorrhizal plants exhibited the highest P and K values compared to non-mycorrhizal ones. Therefore, mycorrhization compensates for the deficit in absorption of inorganic nutrients during drought. Sodium gradually decreased in the leaves but increased in the roots, and this delocalization of Na+ ions under water deficit stress resulted in higher concentrations in the roots than in the leaves of all plants. However, the mycorrhizal plants exhibited relatively lower values of root Na+ compared to the non-mycorrhizal controls. The water deficit reduced the content of chlorophyll a and b in the leaves and the chlorophyll a/b ratio in stressed plants. The lowest chlorophyll values were recorded in non-mycorrhizal plants. The levels of proline and soluble sugars in the leaves and roots of argan plants increased in all plants, especially with the extension of the duration of stress. However, proline accumulation was higher in mycorrhizal plants, with superiority in plants inoculated with the Bouyzakarne complex in comparison with that of Argana. In contrast, the accumulation of soluble sugars was higher in non-mycorrhizal plants than in mycorrhizal plants. We concluded that with a correct choice of the symbiotic fungi complexes, AMF inoculation biotechnology can benefit argan cultivation, especially under stressful conditions in arid regions with structural drought, where native Arbuscular mycorrhizal fungi levels are low
Effects of Arbuscular Mycorrhizal Inoculation by Indigenous Fungal Complexes on the Morpho-Physiological Behavior of <i>Argania spinosa</i> Subjected to Water Deficit Stress
Our objective is to test selected mycorrhizal complexes to verify the contribution of mycorrhizal symbiosis as a biological tool promoting the development of the argan tree under hostile conditions. In addition, this study aims to assess the impact of soil drought caused by stopping watering of young argan plants inoculated with strains of fungal complexes indigenous to the species in comparison to non-inoculated plants. Under conditions of water deficit stress, the most marked reductions in fresh and dry biomass were recorded in non-mycorrhizal plants. The most negative values of leaf water potential Ψf and Ψb were also noted in non-mycorrhizal plants. On the other hand, plants inoculated with mycorrhizal Bouyzakarne inoculum were relatively less affected by watering discontinuation compared to those inoculated with mycorrhizal Argana inoculum. Water stress caused a reduction in potassium and phosphorus content in the leaves and roots of all plants. However, mycorrhizal plants exhibited the highest P and K values compared to non-mycorrhizal ones. Therefore, mycorrhization compensates for the deficit in absorption of inorganic nutrients during drought. Sodium gradually decreased in the leaves but increased in the roots, and this delocalization of Na+ ions under water deficit stress resulted in higher concentrations in the roots than in the leaves of all plants. However, the mycorrhizal plants exhibited relatively lower values of root Na+ compared to the non-mycorrhizal controls. The water deficit reduced the content of chlorophyll a and b in the leaves and the chlorophyll a/b ratio in stressed plants. The lowest chlorophyll values were recorded in non-mycorrhizal plants. The levels of proline and soluble sugars in the leaves and roots of argan plants increased in all plants, especially with the extension of the duration of stress. However, proline accumulation was higher in mycorrhizal plants, with superiority in plants inoculated with the Bouyzakarne complex in comparison with that of Argana. In contrast, the accumulation of soluble sugars was higher in non-mycorrhizal plants than in mycorrhizal plants. We concluded that with a correct choice of the symbiotic fungi complexes, AMF inoculation biotechnology can benefit argan cultivation, especially under stressful conditions in arid regions with structural drought, where native Arbuscular mycorrhizal fungi levels are low
Phytochemical Screening, Antioxidant and Antibacterial Activities of Pollen Extracts from Micromeria fruticosa, Achillea fragrantissima, and Phoenix dactylifera
Pollen is a male flower gametophyte located in the anthers of stamens in angiosperms and a considerable source of compounds with health protective potential. In the present work, phytochemical screening was carried out as well as analysis of the antioxidant and antibacterial properties of pollen extracts from Micromeria fruticosa, Achillea fragrantissima, and Phoenix dactylifera growing wild in Palestine. Phytochemical screening examined the total flavonol, flavone and phenolic content. The DPPH (1,2-Diphenyl-1-Picrylhydrazyl) and FRAP (ferric reducing antioxidant power) methods were used to assess antioxidant propriety, and disc diffusion, minimum inhibitory and bactericidal concentration tests were used to test the pollen extract’s antibacterial activity against multidrug-resistant (MDR) clinical isolates. The highest level of total phenolic was found in the extract of Micromeria fruticosa (56.78 ± 0.49 mg GAE (Gallic Acid Equivalent)/g). The flavone and flavonol content of samples ranged from 2.48 ± 0.05 to 8.03 ± 0.01 mg QE (Quercetin Equivalent)/g. Micromeria fruticosa pollen with IC50 values of 0.047 and 0.039 mg/mL in the DPPH and FRAP assays, respectively, showed the greatest radical scavenging action. In addition, this pollen showed a mild antibacterial action against the microorganisms studied, with MICs varying from 0.625 to 10 mg/mL and inhibition diameters ranging from 13.66 ± 1.5 to 16.33 ± 1.5 mm