2,436 research outputs found
Recommended from our members
Energy and material efficiency of steel powder metallurgy
Concern about global warming motivates the reduction of greenhouse gas emissions from manufacturing but as yet the environmental impact of the whole powder metallurgy production chain has not been assessed. This paper therefore traces the flow of energy and material through the major powder metallurgy processes from liquid steel to final products and assesses the efficiency of both energy and material use. The results show that there is significant opportunity for reducing energy and material requirements in delivering products. Specific opportunities such as avoiding lasers in additive manufacturing or minimizing heat losses in powder sintering are proposed and evaluated
Laser direct writing (LDW) of magnetic structures
Laser direct writing (LDW) has been used to pattern 90nm thick permalloy (Ni 81 Fe 19 ) into 1-D and 2-D microstructures with strong shape anisotropy. Sub-nanosecond laser pulses were focused with a 0.75 NA lens to a 1.85μm diameter spot, to achieve a fluence of approximately 350 mJ.cm -2 and ablate the permalloy film. Computer-controlled sample scanning then allowed structures to be defined. Scan speeds were controlled to give 30% overlap between successive laser pulses and reduce the extent of width modulation in the final structures. Continuous magnetic wires that adjoined the rest of the film were fabricated with widths from 650 nm - 6.75μm and magneto-optical measurements showed coercivity reducing across this width range from 47 Oe to 11 Oe. Attempts to fabricate wires narrower than 650nm resulted in discontinuities in the wires and a marked decrease in coercivity. This approach is extremely rapid and was carried out in air, at room temperature and with no chemical processing. The 6-kHz laser pulse repetition rate allowed wire arrays across an area of 4 mm x 0.18 mm to be patterned in 85 s
Photovoltaic micro-cell design for distrubuted power in sensor networks
We present a new study of power over optical fiber, for use in optical fiber smart sensor networks, using silicon-based photovoltaic micro-cells. A number of parameters in the design of the micro-cell for implementation in a power converter chip have been investigated. Matching the beam profile to the active region, as well as maximizing the contact area improves the device efficiency. The effect of doping profile and junction type on the device performance, suggests silicon is a cost effective and suitable material for this application
Demanding stories: television coverage of sustainability, climate change and material demand
This paper explores the past, present and future role of broadcasting, above all via the medium of television, in shaping how societies talk, think about and act on climate change and sustainability issues. The paper explores these broad themes via a focus on the important but relatively neglected issue of material demand and opportunities for its reduction. It takes the outputs and decision-making of one of the world’s most influential broadcasters, the BBC, as its primary focus. The paper considers these themes in terms of stories, touching on some of the broader societal frames of understanding into which they can be grouped. Media decision-makers and producers from a range of genres frequently return to the centrality of ‘story’ in the development, commissioning and production of an idea. With reference to specific examples of programming, and drawing on interviews with media practitioners, the paper considers the challenges of generating broadcast stories that can inspire engagement in issues around climate change, and specifically material demand. The concluding section proposes actions and approaches that might help to establish material demand reduction as a prominent way of thinking about climate change and environmental issues more widely.
This article is part of the themed issue ‘Material demand reduction’
Revision of failed hip resurfacing to total hip arthroplasty rapidly relieves pain and improves function in the early post operative period
We reviewed the results of 25 consecutive patients who underwent revision of a hip resurfacing prosthesis to a total hip replacement. Revisions were performed for recurrent pain and effusion, infection and proximal femoral fractures. Both components were revised in 20 cases
Magnetic domain walls : Types, processes and applications
Domain walls (DWs) in magnetic nanowires are promising candidates for a
variety of applications including Boolean/unconventional logic, memories,
in-memory computing as well as magnetic sensors and biomagnetic
implementations. They show rich physical behaviour and are controllable using a
number of methods including magnetic fields, charge and spin currents and
spin-orbit torques. In this review, we detail types of domain walls in
ferromagnetic nanowires and describe processes of manipulating their state. We
look at the state of the art of DW applications and give our take on the their
current status, technological feasibility and challenges.Comment: 32 pages, 25 figures, review pape
Recommended from our members
Controls on development and diversity of Early Archean stromatolites
The ≈3,450-million-year-old Strelley Pool Formation in Western Australia contains a reef-like assembly of laminated sedimentary accretion structures (stromatolites) that have macroscale characteristics suggestive of biological influence. However, direct microscale evidence of biology—namely, organic microbial remains or biosedimentary fabrics—has to date eluded discovery in the extensively-recrystallized rocks. Recently-identified outcrops with relatively good textural preservation record microscale evidence of primary sedimentary processes, including some that indicate probable microbial mat formation. Furthermore, we find relict fabrics and organic layers that covary with stromatolite morphology, linking morphologic diversity to changes in sedimentation, seafloor mineral precipitation, and inferred microbial mat development. Thus, the most direct and compelling signatures of life in the Strelley Pool Formation are those observed at the microscopic scale. By examining spatiotemporal changes in microscale characteristics it is possible not only to recognize the presence of probable microbial mats during stromatolite development, but also to infer aspects of the biological inputs to stromatolite morphogenesis. The persistence of an inferred biological signal through changing environmental circumstances and stromatolite types indicates that benthic microbial populations adapted to shifting environmental conditions in early oceans
Higgsless electroweak symmetry breaking at the LHC
While the Higgs model is the best studied scenario of electroweak symmetry
breaking, a number strongly-coupled models exist, predicting new signatures.
Recent studies of WW and WZ final states at the ATLAS and CMS experiments are
summarized and expected sensitivities are presented within the frameworks of
the technicolor straw-man model and the electroweak chiral Lagrangian.Comment: Proceedings for the EPS HEP 2007 conference, Manchester, U.K., on
behalf of the ATLAS and CMS Collaboration
Study of diffusion weighted MRI as a predictive biomarker of response during radiotherapy for high and intermediate risk squamous cell cancer of the oropharynx: The MeRInO study
Introduction and background:
A significant proportion of patients with intermediate and high risk squamous cell cancer of the oropharynx (OPSCC) continue to relapse locally despite radical chemoradiotherapy (CRT). The toxicity of the current combination of intensified dose per fraction radiotherapy and platinum based chemotherapy limits further uniform intensification. If a predictive biomarker for outcomes from CRT can be identified during treatment then individualised and adaptive treatment strategies may be employed.
Methods/design:
The MeRInO study is a prospective observational imaging study of patients with intermediate and high risk, locally advanced OPSCC receiving radical RT or concurrent CRT Patients undergo diffusion weighted MRI prior to treatment (MRI_1) and during the third week of RT (MRI_2). Apparent diffusion coefficient (ADC) measurements will be made on each scan for previously specified target lesions (primary and lymph nodes) and change in ADC calculated. Patients will be followed up and disease status for each target lesion noted. The primary aim of the MeRInO study is to determine the threshold change in ADC from baseline to week 3 of RT that may identify the sub-group of non-responders during treatment.
Discussion:
The use of DW-MRI as a predictive biomarker during RT for SCC H&N is in its infancy but studies to date have found that response to treatment may indeed be predicted by comparison of DW-MRI carried out before and during treatment. However, previous studies have included all sub-sites and biological sub-types. Establishing ADC thresholds that predict for local failure is an essential step towards using DW-MRI to improve the therapeutic ratio in treating SCC H&N. This would be done most robustly in a specific H&N sub-site and in sub-types with similar biological behaviour. The MeRInO study will help establish these thresholds in OPSCC
- …