HAZARD IDENTIFICATION RISK ASSESSMENT AND DETERMINING CONTROL SEBAGAI UPAYA PENCEGAHAN KECELAKAAN KERJA DI PT. GEMALA KEMPA DAYA

Background: The use of the machine, lift-transport equipment, chemicals used may pose a risk to the workforce. The purpose of the research is to know the Hazard Identification Risk Assesment and Determining Control (HIRADC) in the area of press 4000 ton PT. Gemala Kempa Daya. Methods: A descriptive study using the method which gives an assessment of hazard identification program, and risk control efforts undertaken in the area of press 4000 ton PT. Gemala Kempa Daya. Against the potential dangers that exist. The results obtained are then compared with the OHSAS 18001: 2007 clause 4.3.1. Result: Area Press 4000 Ton there are potential dangers of noise, vibration, slip, hit by dies, wedged, stumble, fall, ergonomics and scratched. There is almost no risk in Setting/uninstall/Uninstall Setting Stopper, Dies, behind the Side Rail, and push the Buggy Side Rail, light on risks Raise Side Rail with Hoist, Hoist, Unloading the Part with the risk of being at risk, the Spacer and place weight on the production press 4000 ton. Controlling conducted include engineering control, administration and use of the APD. Conclusion: PT. Gemala Kempa Daya has implemented a Hazard Identification Risk Assesment and Determining Control, so that it can lower the risk of the occurrence of the accident in accordance with OHSAS 18001: 2007 Clause 4.3.1. The advice given is doing to the socialization of labor IBPPPR in the press 4000 ton. Key: Hazard Identification Risk Assesment and Determining Control 1. Industrial Hygiene, Occupational Health and Safety Program, Faculty of Medicine, Sebelas Maret University, Surakarta 2. Lecturer of Industrial Hygiene, Occupational Health and Safety Program, Faculty of Medicine, Sebelas Maret University, Surakart

The facial measurements in health workers at Dr. Sardjito General Hospital, Yogyakarta

The appropriate mask is based on facial anthropometric measurements that may be affected by sex, race, age, and body mass index (BMI). This study aimed to determine the difference and relationship between the bizygomatic width (BW) and nasion-menton height (NMH) with sex and BMI in health workers. This descriptive-analytical study used a cross-sectional method. The subjects were 39 health workers (nurses and doctors) at Dr. Sardjito General Hospital, Yogyakarta consisting of 15 male subjects and 24 female subjects, aged between 25-55 years old. Anthropometric measurements were performed on the subjects, including body weight, height, NW, and NMH. The data were analyzed using the Shapiro-Wilk test, independent t-test, and Pearson’s test. There was a significant difference in the BW between male and female subjects (p0.05). The Pearson’s test results showed no significant relationship between the BW with BMI in both the male subjects (r=0.351; p=0.199) and the female subjects (r=0.349; p=0.094), and between the nasion-menton height with BMI in both the male subjects (r=0.101; p=0.721) and the female subjects (r=0.390, p=0.060). In conclusion, the males’ BW was larger than the female health workers. It is necessary to consider facial anthropometric measurements in face mask manufacturing to provide comfort and good protection