Impact of Biofield Energy Treatment on Soil Fertility

Measurement of soil components such as microbial population, minerals and obviously the content of organic carbon play the important roles for the productivity of crops and plants. The present study was attempted to evaluate the impact of Mr. Trivedi’s biofield energy treatment on soil for its physical (electrical conductivity), chemical (minerals) and microbial flora (bacteria and fungi). A plot of lands was assigned for this study with some already grown plants. This plot was divided into two parts. One part was considered as control, while another part was subjected to Mr. Trivedi’s biofield energy treatment without physically touching and referred as treated. In the treated soil the total bacterial and fungal counts were increased by 546 and 617%, respectively as compared to the untreated soil. Additionally, the conductivity of soil of the treated plot was increased by 79% as compared to the soil of control plot. Apart from microbes, the content of various minerals were also changed in the biofield energy treated soil. The calcium carbonate content showed 2909 ppm in the control, while in the treated soil it was increased to 3943 ppm i.e. 36% increased. Various other minerals such as nitrogen and potassium were increased by 12% and 7%, respectively as compared to the control. Besides, the level of some minerals such as potassium, iron, and chloride were decreased by 9%, 23%, and 41%, respectively as compared to the control. Apart from chemical constituents of soil, the content of organic carbon was also reduced by 8% in the treated soil as compared to the control soil. The overall results envisaged that the biofield energy treatment on the soil showed a significant improvement in the physical, chemical, and microbial functions of soil component. Thus, improved the conductance, supportive microbes, minerals and overall productivity of crops. In conclusion, the biofield energy treatment could be used as an alternative way to increase the yield of quality crops by increasing soil fertility

Finite energy spin fluctuation as a pairing glue in systems with coexisting electron and hole bands

We study, within the fluctuation exchange approximation, the spin-fluctuation-mediated superconductivity in Hubbard-type models possessing electron and hole bands, and compare them with a model on a square lattice with a large Fermi surface. In the square lattice model, superconductivity is more enhanced for better nesting for a fixed band filling. By contrast, in the models with electron and hole bands, superconductivity is optimized when the Fermi surface nesting is degraded to some extent, where finite energy spin fluctuation around the nesting vector develops. The difference lies in the robustness of the nesting vector, namely, in models with electron and hole bands, the wave vector at which the spin susceptibility is maximized is fixed even when the nesting is degraded, whereas when the Fermi surface is large, the nesting vector varies with the deformation of the Fermi surface. We also discuss the possibility of realizing in actual materials the bilayer Hubbard model, which is a simple model with electron and hole bands, and is expected to have a very high T_c

Biofield treatment: A potential strategy for modification of physical and thermal properties of indole

Indole compounds are important class of therapeutic molecules, which have excellent pharmaceutical applications. The objective of present research was to investigate the influence of biofield treatment on physical and thermal properties of indole. The study was performed in two groups (control and treated). The control group remained as untreated, and biofield treatment was given to treated group. The control and treated samples were characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy and ultraviolet-visible (UV-Vis) spectroscopy. XRD study demonstrated the increase in crystalline nature of treated indole as compared to control. Additionally, the treated indole showed increase in crystallite size by 2.53% as compared to control. DSC analysis of treated indole (54.45oC) showed no significant change in melting temperature (Tm) in comparison with control sample (54.76oC). A significant increase in latent heat of fusion (ΔH) by 30.86% was observed in treated indole with respect to control. Derivative thermogravimetry (DTG) of treated indole showed elevation in maximum thermal decomposition temperature (Tmax) 166.49oC as compared to control (163.37oC). This was due to increase in thermal stability of indole after biofield treatment. FT-IR analysis of treated indole showed increase in frequency of N-H stretching vibrational peak by 6 cm-1 as compared to control sample. UV spectroscopy analysis showed no alteration in absorption wavelength (λmax) of treated indole with respect to control. The present study showed that biofield has substantially affected the physical and thermal nature of indole. This record was migrated from the OpenDepot repository service in June, 2017 before shutting down

Evaluation of Isotopic Abundance Ratio in Biofield Energy Treated Nitrophenol Derivatives Using Gas Chromatography-Mass Spectrometry

Nitrophenols are the synthetic organic chemicals used for the preparation of synthetic intermediates, organophosphorus pesticides, and pharmaceuticals. The objective of the present study was to evaluate the effect of biofield energy treatment on the isotopic abundance ratios of PM+1/PM, and PM+2/PM in o- and m-nitrophenol using the gas chromatography-mass spectrometry. The o- and m-nitrophenol were divided into two parts - one part was control sample, and another part was considered as biofield energy treated sample, which received Mr. Trivedi's biofield energy treatment (The Trivedi Effect®). The biofield energy treated nitrophenols having analyzed at different time intervals were designated as T1, T2, T3, and T4. The GC-MS analysis of both the control and biofield treated samples indicated the presence of the parent molecular ion peak of o- and m-nitrophenol (C6H5NO3+) at m/z 139 along with major fragmentation peaks at m/z 122, 109, 93, 81, 65, and 39. The relative peak intensities of the fragmented ions in the biofield treated o- and m-nitrophenol were notably changed as compared to the control sample with respect to the time. The isotopic abundance ratio analysis using GC-MS revealed that the isotopic abundance ratio of PM+1/PM in the biofield energy treated o-nitrophenol at T2 and T3 was significantly increased by 14.48 and 86.49%, respectively as compared to the control sample. Consequently, the isotopic abundance ratio of PM+2/PM in the biofield energy treated sample at T2 and T3 was increased by 11.36, and 82.95%, respectively as compared to the control sample. Similarly, in m-nitrophenol, the isotopic abundance ratio of PM+1/PM in the biofield energy treated sample at T1, T3, and T4 was increased by 5.82, 5.09, and 6.40%, respectively as compared to the control sample. Subsequently, the isotopic abundance ratio of PM+2/PM at T1, T2, T3 and T4 in the biofield energy treated m-nitrophenol was increased by 6.33, 3.80, 16.46, and 16.46%, respectively as compared to the control sample. Overall, the isotopic abundance ratios of PM+1/PM(2H/1H or 13C/12C or 15N/14N or 17O/16O), and PM+2/PM(18O/16O) were altered in the biofield energy treated o- and m-nitrophenol as compared to the control increased in most of the cases. The biofield treated o- and m-nitrophenol that have improved isotopic abundance ratios might have altered the physicochemical properties and could be useful in pharmaceutical and chemical industries as an intermediate in the manufacturing of pharmaceuticals and other useful chemicals for the industrial application. This record was migrated from the OpenDepot repository service in June, 2017 before shutting down

Evaluation of Isotopic Abundance Ratio in Naphthalene Derivatives After Biofield Energy Treatment Using Gas Chromatography-Mass Spectrometry

Naphthalene and 2-naphthol are two naphthalene derivatives, which play important roles in the chemical and pharmaceutical industries. The aim of this study was to evaluate the impact of biofield energy treatment on the isotopic abundance of 13C/12C or 2H/1H and 18O/16O in naphthalene and 2-naphthol using gas chromatography-mass spectrometry (GC-MS). Naphthalene and 2-naphthol samples were divided into two parts: control and treated. The control group remained as untreated, while the treated group was subjected to Mr. Trivedi's biofield energy treatment. The treated samples were subdivided into four parts named as T1, T2, T3 and T4. Control and treated samples were characterized using GC-MS. The GC-MS data revealed that the isotopic abundance ratio of 13C/12C or 2H/1H, (PM+1)/PM and 18O/16O, (PM+2)/PM were increased significantly in treated naphthalene and 2-naphthol (where PM-primary molecule, (PM+1) isotopic molecule either for 13C or 2H and (PM+2) is the isotopic molecule for 18O). The isotopic abundance ratio of (PM+1)/PM in the treated T2 samples of naphthalene and 2-naphthol was increased up to 129.40% and 165.40%, respectively as compared to their respective control. However, the isotopic abundance ratio of (PM+1)/PM in the treated T1, T3 and T4 samples of naphthalene was decreased by 44.41%, 33.49% and 30.3%, respectively as compared to their respective control. While in case of 2-naphthol, the isotopic abundance ratio of (PM+1)/PM was decreased by 39.57% in T1 sample and then gradually increased up to 9.85% from T3 to T4 samples. The isotopic abundance ratio of (PM+2)/PM in treated T2 sample of 2-naphthol was increased up to 163.24%, whereas this value was decreased by 39.57% in treated T1 sample. The GC-MS data suggest that the biofield energy treatment has significantly altered the isotopic abundance of 2H, 13C in naphthalene and 2H, 13C and 18O in 2-naphthol as compared to the control. This record was migrated from the OpenDepot repository service in June, 2017 before shutting down

Effect of Biofield Treatment on the Physical and Thermal Characteristics of Aluminium Powders

In the present investigation, Aluminium powders were exposed to non-contact Biofield treatment. Both the exposed and unexposed powders were later characterized by various techniques. The average particle size, after a slight initial decrease was found to increase after 80 days of treatment substantially, which suggested the operation of competing mechanisms fracture and sintering (micro welding). The BET surface area monotonically decreased which was consistent with increase in particle size. SEM photographs showed that samples exposed to Biofield after 38 days showed growth in particle size and particles joined at inter and intra particle boundaries. X-ray diffraction of the powder samples indicated both increase and decrease in crystallite size, unit cell volume, change in nuclear charge per unit volume of atom and atomic weight of samples exposed to Biofield even after 106 days. This record was migrated from the OpenDepot repository service in June, 2017 before shutting down

Influence of Biofield Energy Treatment on Isotopic Abundance Ratio in Aniline Derivatives

The aim of this study was to evaluate the impact of biofield energy treatment on the isotopic abundance of 13C/12C or 2H/1H or 15N/14N ≡ (PM+1)/PM in aniline; and (PM+1)/PM and 81Br/79Br ≡ (PM+2)/PM in 4-bromoaniline using Gas Chromatography-Mass Spectrometry (GC-MS). Aniline and 4-bromoaniline samples were divided into two parts: control and treated. The control part remained as untreated, while the treated part was subjected to Mr. Trivedi's biofield energy treatment. The treated samples were subdivided in three parts named as T1, T2, and T3 for aniline and four parts named as T1, T2, T3, and T4 for 4-bromoaniline. The GC-MS data revealed that the isotopic abundance ratio of (PM+1)/PM in aniline was increased from -40.82%, 30.17% and 73.12% in T1, T2 and T3 samples respectively. However in treated samples of 4-bromoaniline the isotopic abundance ratio of PM+1/PM was increased exponentially from -4.36 % (T1) to 368.3% (T4) as compared to the control. A slight decreasing trend of the isotopic ratio of (PM+2)/ PM in 4-bromoaniline was observed after biofield energy treatment. The GC-MS data suggests that the biofield energy treatment has significantly increased the isotopic abundance of 2H, 13C and 15N in the treated aniline and 4-bromoaniline, while slight decreased the isotopic abundance of 81Br in treated 4-bromoaniline as compared to their respective control. This record was migrated from the OpenDepot repository service in June, 2017 before shutting down

Biofield Energy Treatment: A Potential Strategy for Modulating Physical, Thermal and Spectral Properties of 3-Chloro-4-fluoroaniline

3-Chloro-4-fluoroaniline (CFA) is used as an intermediate for the synthesis of pharmaceutical compounds. The objective of this study was to investigate the influence of biofield energy treatment on the physical, thermal and spectral properties of CFA. The study was performed in two groups (control and treated). The control group remained as untreated, and the treated group received Mr. Trivedi's biofield energy treatment. The control and treated CFA samples were further characterized by x-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), fourier transform infrared (FT-IR) spectroscopy, and ultra violet-visible spectroscopy (UV-vis) analysis. The XRD analysis of treated CFA showed significant changes in the intensity of peaks as compared to the control. However, the average crystallite size (G) was significantly decreased by 22.08% in the treated CFA with respect to the control. The DSC analysis showed slight decrease in the melting temperature of treated CFA (47.56°C) as compared to the control (48.05°C). However, the latent heat of fusion in the treated sample was considerably changed by 4.28% with respect to the control. TGA analysis showed increase in maximum thermal decomposition temperature (Tmax) of the treated sample (163.34°C) as compared to the control sample (159.97°C). Moreover the onset temperature of treated CFA (148 °C) was also increased as compared to the control sample (140°C). Additionally, the weight loss of the treated sample was reduced (42.22%) with respect to the control (56.04%) that may be associated with an increase in thermal stability. The FT-IR spectroscopic evaluation showed emergence of one new peak at 3639 cm-1 and alteration of the N-H (stretching and bending) peak in the treated sample as compared to the control. Overall, the result demonstrated that Mr. Trivedi's biofield energy treatment has a paramount influence on the physical, thermal and spectral properties of CFA. This record was migrated from the OpenDepot repository service in June, 2017 before shutting down

Potential Impact of BioField Treatment on Atomic and Physical Characteristics of Magnesium

Magnesium (Mg), present in every cell of all living organisms, is an essential nutrient and primarily responsible for catalytic reaction of over 300 enzymes. The aim of present study was to evaluate the effect of biofield treatment on atomic and physical properties of magnesium powder. Magnesium powder was divided into two parts denoted as control and treatment. Control part was remained as untreated and treatment part received biofield treatment. Both control and treated magnesium samples were characterized using X-ray diffraction (XRD), surface area and particle size analyzer. XRD data showed that biofield treatment has altered the lattice parameter, unit cell volume, density, atomic weight, and nuclear charge per unit volume of treated magnesium powder, as compared to control. In addition, the crystallite size of treated magnesium was significantly reduced up to 16.70, 16.70, and 28.59% on day 7, 41 and 63 respectively as compared to control. Besides this, the surface area of treated magnesium powder was increased by 36.5 and 10.72% on day 6 and 72 respectively, whereas it was reduced by 32.77% on day 92 as compared to control. In addition, biofield treatment has also altered the particle sizes d10, d50, and d99 (size, below which 10, 50, and 99% particles were present, respectively) as compared to control. Overall, data suggest that biofield treatment has substantially altered the atomic and physical properties of treated magnesium powder. This record was migrated from the OpenDepot repository service in June, 2017 before shutting down

Analysis of Genetic Diversity Using Simple Sequence Repeat (SSR) Markers and Growth Regulator Response in Biofield Treated Cotton (Gossypium hirsutum L.)

Cotton is the most important crop for the production of fiber that plays a key role in economic and social affairs. The aim of the study was to evaluate the impact of biofield energy treatment on cotton seeds regarding its growth, germination of seedling, glutathione (GSH) concentration, indole acetic acid (IAA) content and DNA fingerprinting using simple sequence repeat (SSR) markers for polymorphism analysis. The seeds of cotton cv. Stoneville-2 (Gossypium hirsutum L.) was obtained from DNA Land Marks Inc., Canada and divided into two groups. One group was remained as untreated, while the other was subjected to Mr. Trivedi biofield energy and referred as treated sample. The growth-germination of cotton seedling data showed higher germination (82%) in biofield treated seeds as compared to the control (68%). The alterations in length of shoot and root of cotton seedling was reported in the treated sample with respect to untreated seeds. However, the endogenous level of GSH in the leaves of treated cotton was increased by 27.68% as compared to the untreated sample, which may suggest an improved immunity of cotton plant. Further, the plant growth regulatory constituent i.e. IAA concentration was increased by 7.39%, as compared with the control. Besides, the DNA fingerprinting data, showed polymorphism (4%) between treated and untreated samples of cotton. The overall results suggest that the biofield energy treatment on cotton seeds, results in improved overall growth of plant, increase germination rate, GSH and IAA concentration were increased. The study assumed that biofield energy treatment on cotton seeds would be more useful for the production of cotton fiber