228 research outputs found

    Thermodynamic stability of Fe/O solid solution at inner-core conditions

    Get PDF
    We present a new technique which allows the fully {\em ab initio} calculation of the chemical potential of a substitutional impurity in a high-temperature crystal, including harmonic and anharmonic lattice vibrations. The technique uses the combination of thermodynamic integration and reference models developed recently for the {\em ab initio} calculation of the free energy of liquids and anharmonic solids. We apply the technique to the case of the substitutional oxygen impurity in h.c.p. iron under Earth's core conditions, which earlier static {\em ab initio} calculations indicated to be thermodynamically very unstable. Our results show that entropic effects arising from the large vibrational amplitude of the oxygen impurity give a major reduction of the oxygen chemical potential, so that oxygen dissolved in h.c.p. iron may be stabilised at concentrations up a few mol % under core conditions

    First principles simulations of direct coexistence of solid and liquid aluminium

    Get PDF
    First principles calculations based on density functional theory, with generalised gradient corrections and ultrasoft pseudopotentials, have been used to simulate solid and liquid aluminium in direct coexistence at zero pressure. Simulations have been carried out on systems containing up to 1000 atoms for 15 ps. The points on the melting curve extracted from these simulations are in very good agreement with previous calculations, which employed the same electronic structure method but used an approach based on the explicit calculation of free energies [L. Vo\v{c}adlo and D. Alf\`e, Phys. Rev. B, {\bf 65}, 214105 (2002).]Comment: To appear in Phys. Rev.

    Comment on 'Molybdenum at High Pressure and Temperature: Melting from Another Solid Phase'

    Get PDF
    There has been a major controversy over the past seven years about the high-pressure melting curves of transition metals. Static compression (diamond-anvil cell: DAC) experiments up to the Mbar region give very low melting slopes dT_m/dP, but shock-wave (SW) data reveal transitions indicating much larger dT_m/dP values. Ab initio calculations support the correctness of the shock data. In a very recent letter, Belonoshko et al. propose a simple and elegant resolution of this conflict for molybdenum. Using ab initio calculations based on density functional theory (DFT), they show that the high-P/high-T phase diagram of Mo must be more complex than was hitherto thought. Their calculations give convincing evidence that there is a transition boundary between the normal bcc structure of Mo and a high-T phase, which they suggest could be fcc. They propose that this transition was misinterpreted as melting in DAC experiments. In confirmation, they note that their boundary also explains a transition seen in the SW data. We regard Belonoshko et al.'s Letter as extremely important, but we note that it raises some puzzling questions, and we believe that their proposed phase diagram cannot be completely correct. We have calculated the Helmholtz and Gibbs free energies of the bcc, fcc and hcp phases of Mo, using essentially the same quasiharmonic methods as used by Belonoshko et al.; we find that at high-P and T Mo in the hcp structure is more stable than in bcc or fcc.Comment: 1 page, 1 figure. submitted to Phys. Rev. Let

    Ab initio statistical mechanics of surface adsorption and desorption: I. H2_2O on MgO (001) at low coverage

    Full text link
    We present a general computational scheme based on molecular dynamics (m.d.) simulation for calculating the chemical potential of adsorbed molecules in thermal equilibrium on the surface of a material. The scheme is based on the calculation of the mean force in m.d. simulations in which the height of a chosen molecule above the surface is constrained, and subsequent integration of the mean force to obtain the potential of mean force and hence the chemical potential. The scheme is valid at any coverage and temperature, so that in principle it allows the calculation of the chemical potential as a function of coverage and temperature. It avoids all statistical mechanical approximations, except for the use of classical statistical mechanics for the nuclei, and assumes nothing in advance about the adsorption sites. From the chemical potential, the absolute desorption rate of the molecules can be computed, provided the equilibration rate on the surface is faster than the desorption rate. We apply the theory by {\em ab initio} m.d. simulation to the case of H2_2O on MgO (001) in the low-coverage limit, using the Perdew-Burke-Ernzerhof (PBE) form of exchange-correlation. The calculations yield an {\em ab initio} value of the Polanyi-Wigner frequency prefactor, which is more than two orders of magnitude greater than the value of 101310^{13} s1^{-1} often assumed in the past. Provisional comparison with experiment suggests that the PBE adsorption energy may be too low, but the extension of the calculations to higher coverages is needed before firm conclusions can be drawn. The possibility of including quantum nuclear effects by using path-integral simulations is noted.Comment: 11 pages + 10 figure

    The earth’s core: an approach from first principles

    Get PDF
    The Earth’s core is largely composed of iron (Fe), alloyed with less dense elements such as sulphur, silicon and/or oxygen. The phase relations and physical properties of both solid and liquid Fe-alloys are therefore of great geophysical importance. As a result, over the past fifty years the properties of Fe and its alloys have been extensively studied experimentally. However, achieving the extreme pressures (up to 360 GPa) and temperatures (~6000K) found in the core provide a major experimental challenge, and it is not surprising that there are still considerable discrepancies in the results obtained by using different experimental techniques. In the past fifteen years quantum mechanical techniques have been applied to predict the properties of Fe. Here we review the progress that has been made in the use of first principles methods to study Fe and its alloys, and as a result of these studies we conclude: (i) that pure Fe adopts an hexagonal close packed structure under core conditions and melts at ~6200 K at 360 GPa, (ii) that thermodynamic equilibrium and observed seismic data are satisfied by a liquid Fe alloy outer core with a composition of ~10 mole% S (or Si) and 8 mole% O crystallising at ~ 5500 K to give an Fe alloy inner core with ~8 mole% S (or Si) and 0.2 mole % O, and (iii) that with such concentrations of S (or Si), an Fe alloy might adopt a body centred cubic structure in all or part of the inner core. In the future the roles of Ni, C, H and K in the core need to be studied, and techniques to predict the transport and rheological properties of Fe alloys need to be developed

    Hydrogen dissociation on the Mg(0001) surface from quantum Monte Carlo calculations

    Full text link
    We have used diffusion Monte Carlo (DMC) simulations to calculate the energy barrier for H2_2 dissociation on the Mg(0001) surface. The calculations employ pseudopotentials and systematically improvable B-spline basis sets to expand the single particle orbitals used to construct the trial wavefunctions. Extensive tests on system size, time step, and other sources of errors, performed on periodically repeated systems of up to 550 atoms, show that all these errors together can be reduced to 0.03\sim 0.03 eV. The DMC dissociation barrier is calculated to be 1.18±0.031.18 \pm 0.03 eV, and is compared to those obtained with density functional theory using various exchange-correlation functionals, with values ranging between 0.44 and 1.07 eV.Comment: 6 pages, 4 figures, to appear in Physical Review

    Ab initio melting curve of molybdenum by the phase coexistence method

    Full text link
    We report ab initio calculations of the melting curve of molybdenum for the pressure range 0-400 GPa. The calculations employ density functional theory (DFT) with the Perdew-Burke-Ernzerhof exchange-correlation functional in the projector augmented wave (PAW) implementation. We present tests showing that these techniques accurately reproduce experimental data on low-temperature b.c.c. Mo, and that PAW agrees closely with results from the full-potential linearized augmented plane-wave implementation. The work attempts to overcome the uncertainties inherent in earlier DFT calculations of the melting curve of Mo, by using the ``reference coexistence'' technique to determine the melting curve. In this technique, an empirical reference model (here, the embedded-atom model) is accurately fitted to DFT molecular dynamics data on the liquid and the high-temperature solid, the melting curve of the reference model is determined by simulations of coexisting solid and liquid, and the ab initio melting curve is obtained by applying free-energy corrections. Our calculated melting curve agrees well with experiment at ambient pressure and is consistent with shock data at high pressure, but does not agree with the high pressure melting curve deduced from static compression experiments. Calculated results for the radial distribution function show that the short-range atomic order of the liquid is very similar to that of the high-T solid, with a slight decrease of coordination number on passing from solid to liquid. The electronic densities of states in the two phases show only small differences. The results do not support a recent theory according to which very low dTm/dP values are expected for b.c.c. transition metals because of electron redistribution between s-p and d states.Comment: 27 pages, 10 figures. to be published in Journal of Chemical Physic

    Thermal and electrical conductivity of iron at Earth's core conditions

    Get PDF
    The Earth acts as a gigantic heat engine driven by decay of radiogenic isotopes and slow cooling, which gives rise to plate tectonics, volcanoes, and mountain building. Another key product is the geomagnetic field, generated in the liquid iron core by a dynamo running on heat released by cooling and freezing to grow the solid inner core, and on chemical convection due to light elements expelled from the liquid on freezing. The power supplied to the geodynamo, measured by the heat-flux across the core-mantle boundary (CMB), places constraints on Earth's evolution. Estimates of CMB heat-flux depend on properties of iron mixtures under the extreme pressure and temperature conditions in the core, most critically on the thermal and electrical conductivities. These quantities remain poorly known because of inherent difficulties in experimentation and theory. Here we use density functional theory to compute these conductivities in liquid iron mixtures at core conditions from first principles- the first directly computed values that do not rely on estimates based on extrapolations. The mixtures of Fe, O, S, and Si are taken from earlier work and fit the seismologically-determined core density and inner-core boundary density jump. We find both conductivities to be 2-3 times higher than estimates in current use. The changes are so large that core thermal histories and power requirements must be reassessed. New estimates of adiabatic heat-flux give 15-16 TW at the CMB, higher than present estimates of CMB heat-flux based on mantle convection; the top of the core must be thermally stratified and any convection in the upper core driven by chemical convection against the adverse thermal buoyancy or lateral variations in CMB heat flow. Power for the geodynamo is greatly restricted and future models of mantle evolution must incorporate a high CMB heat-flux and explain recent formation of the inner core.Comment: 11 pages including supplementary information, two figures. Scheduled to appear in Nature, April 201

    Assessing the accuracy of quantum Monte Carlo and density functional theory for energetics of small water clusters

    Full text link
    We present a detailed study of the energetics of water clusters (H2_2O)n_n with n6n \le 6, comparing diffusion Monte Carlo (DMC) and approximate density functional theory (DFT) with well converged coupled-cluster benchmarks. We use the many-body decomposition of the total energy to classify the errors of DMC and DFT into 1-body, 2-body and beyond-2-body components. Using both equilibrium cluster configurations and thermal ensembles of configurations, we find DMC to be uniformly much more accurate than DFT, partly because some of the approximate functionals give poor 1-body distortion energies. Even when these are corrected, DFT remains considerably less accurate than DMC. When both 1- and 2-body errors of DFT are corrected, some functionals compete in accuracy with DMC; however, other functionals remain worse, showing that they suffer from significant beyond-2-body errors. Combining the evidence presented here with the recently demonstrated high accuracy of DMC for ice structures, we suggest how DMC can now be used to provide benchmarks for larger clusters and for bulk liquid water.Comment: 34 pages, 6 figure
    corecore