bOptimizing atomic force microscopy for characterization of diamond-protein interfaces

Atomic force microscopy (AFM) in contact mode and tapping mode is employed for high resolution studies of soft organic molecules (fetal bovine serum proteins) on hard inorganic diamond substrates in solution and air. Various effects in morphology and phase measurements related to the cantilever spring constant, amplitude of tip oscillations, surface approach, tip shape and condition are demonstrated and discussed based on the proposed schematic models. We show that both diamond and proteins can be mechanically modified by Si AFM cantilever. We propose how to choose suitable cantilever type, optimize scanning parameters, recognize and minimize various artifacts, and obtain reliable AFM data both in solution and in air to reveal microscopic characteristics of protein-diamond interfaces. We also suggest that monocrystalline diamond is well defined substrate that can be applicable for fundamental studies of molecules on surfaces in general

HYDRATION OF PLASMA-TREATED ALUMOSILICATE BINDERS

Plasma treatment offers several applications in material science. In this research, the potential of plasma treatment is explored on the hydration of hydrophilic CNT-enriched cement and hydrophilic fly ash. The evolution of the hydration heat and the compressive strength show that a hydrophilic surface slightly accelerates the early-age hydration kinetics, while the long-term properties remain unchanged

DEPOSITION CARBON NANOSTRUCTURES BY SURFATRON GENERATED DISCHARGE

Carbon nanostructures were deposited by surface wave discharge using various Ar/CH4/ CO2 gas mixture ratios. The morphology was controlled by adjusting of gas concentration and was investigated by scanning electron microscopy (SEM). Also, the influence of the low temperature plasma treatment and process time on the wettability of the diamond films has been studied. The results indicate that for hydrogen termination of diamond surface indicate that the temperature as low as 400°C and treatment time of 15 min is sufficient to attain the p-type surface conductivity of diamond

Design and investigation of properties of nanocrystalline diamond optical planar waveguides

Diamond thin films have remarkable properties comparable with natural diamond. Because of these properties it is a very promising material for many various applications (sensors, heat sink, optical mirrors, chemical and radiation wear, cold cathodes, tissue engineering, etc.) In this paper we report about design, deposition and measurement of properties of optical planar waveguides fabricated from nanocrystalline diamond thin films. The nanocrystalline diamond planar waveguide was deposited by microwave plasma enhanced chemical vapor deposition and the structure of the deposited film was studied by scanning electron microscopy and Raman spectroscopy. The design of the presented planar waveguides was realized on the bases of modified dispersion equation and was schemed for 632.8 nm, 964 nm, 1 310 nm and 1 550 nm wavelengths. Waveguiding properties were examined by prism coupling technique and it was found that the diamond based planar optical element guided one fundamental mode for all measured wavelengths. Values of the refractive indices of our NCD thin film measured at various wavelengths were almost the same as those of natural diamond

STRUCTURING OF DIAMOND FILMS USING MICROSPHERE LITHOGRAPHY

In this study, the structuring of micro- and nanocrystalline diamond thin films is demonstrated. The structuring of the diamond films is performed using the technique of microsphere lithography followed by reactive ion etching. Specifically, this paper presents a four-step fabrication process: diamond deposition (microwave plasma assisted chemical vapor deposition), mask preparation (by the standard Langmuir-Blodgett method), mask modification and diamond etching. A self-assembled monolayer of monodisperse polystyrene (PS) microspheres with close-packed ordering is used as the primary template. Then the PS microspheres and the diamond films are processed in capacitively coupled radiofrequency plasma  using different plasma chemistries. This fabrication method illustrates the preparation of large arrays of periodic and homogeneous hillock-like structures. The surface morphology of processed diamond films is characterized by scanning electron microscopy and atomic force microscope. The potential applications of such diamond structures in various fields of nanotechnology are also briefly discussed

The Application of Nanodiamond in Biotechnology and Tissue Engineering

Diamond in the allotrope form consists of carbon atoms arranged in a cubic crystal structure covalently bonded in sp3 hybridization. Diamond has emerged as a very promising material for various biomedical applications due to its excellent mechanical properties (hardness, low friction coefficient, good adhesiveness to the underlying substrate, good interlayer cohesion), optical properties (the ability to emit intrinsic luminescence), electrical properties (good insulator in the pristine state and semiconductor after doping), chemical resistance (low chemical reactivity and resistance to wet etching) and biocompatibility (little if any toxicity and immunogenicity). For advanced biomedical applications, diamond is promising particularly in its nanostructured forms, namely nanoparticles, nanostructured diamond films and composite scaffolds in which diamond nanoparticles are dispersed in a matrix (mainly nanodiamond-loaded nanofibrous scaffolds). This chapter summarizes both our long-term experience and that of other research groups in studies focusing on the interaction of cells (particularly bone-derived cells) with nanodiamonds as nanoparticles, thin films and composites with synthetic polymers. Their potential applications in bioimaging, biosensing, drug delivery, biomaterial coating and tissue engineering are also reviewed

Nanofibrous Scaffolds as Promising Cell Carriers for Tissue Engineering

Nanofibers are promising cell carriers for tissue engineering of a variety of tissues and organs in the human organism. They have been experimentally used for reconstruction of tissues of cardiovascular, respiratory, digestive, urinary, nervous and musculoskeletal systems. Nanofibers are also promising for drug and gene delivery, construction of biosensors and biostimulators, and wound dressings. Nanofibers can be created from a wide range of natural polymers or synthetic biostable and biodegradable polymers. For hard tissue engineering, polymeric nanofibers can be reinforced with various ceramic, metal-based or carbon-based nanoparticles, or created directly from hard materials. The nanofibrous scaffolds can be loaded with various bioactive molecules, such as growth, differentiation and angiogenic factors, or funcionalized with ligands for the cell adhesion receptors. This review also includes our experience in skin tissue engineering using nanofibers fabricated from polycaprolactone and its copolymer with polylactide, cellulose acetate, and particularly from polylactide nanofibers modified by plasma activation and fibrin coating. In addition, we studied the interaction of human bone-derived cells with nanofibrous scaffolds loaded with hydroxyapatite or diamond nanoparticles. We also created novel nanofibers based on diamond deposition on a SiO2 template, and tested their effects on the adhesion, viability and growth of human vascular endothelial cells

Silicon-Vacancy Centers in Ultra-Thin Nanocrystalline Diamond Films

Color centers in diamond have shown excellent potential for applications in quantum information processing, photonics, and biology. Here we report the optoelectronic investigation of shallow silicon vacancy (SiV) color centers in ultra-thin (7–40 nm) nanocrystalline diamond (NCD) films with variable surface chemistry. We show that hydrogenated ultra-thin NCD films exhibit no or lowered SiV photoluminescence (PL) and relatively high negative surface photovoltage (SPV) which is ascribed to non-radiative electron transitions from SiV to surface-related traps. Higher SiV PL and low positive SPV of oxidized ultra-thin NCD films indicate an efficient excitation—emission PL process without significant electron escape, yet with some hole trapping in diamond surface states. Decreasing SPV magnitude and increasing SiV PL intensity with thickness, in both cases, is attributed to resonant energy transfer between shallow and bulk SiV. We also demonstrate that thermal treatments (annealing in air or in hydrogen gas), commonly applied to modify the surface chemistry of nanodiamonds, are also applicable to ultra-thin NCD films in terms of tuning their SiV PL and surface chemistry