10 research outputs found

    The effects of displaying availability sections of an automated driving function

    Get PDF
    So far, there has been little research into displaying the availability of a higher-level automated driving system. The benefits of presenting availability times while driving automatically have already been discussed, but there are no findings on giving information on all availability sections (operational design domains) independent of the current state of the automated driving system. This work aims to close this gap by conducting a driving simulator study with N = 54 participants to verify whether an overview display of all the road sections on which automated driving is possible has a positive effect on the participants’ acceptance, usability, workload, and task performances. Results showed that the presentation of this additional information had a significantly positive influence on both acceptance and task performance. The outcomes of this work indicate that the required transparency-creating information of the automated driving system should not be limited to safety-related information or the phases of automated driving itself

    Does a Confidence Level for Automated Driving Time Estimations Improve the Subjective Evaluation of an Automation HMI?

    Get PDF
    Current research in human factors and automated driving is increasingly focusing on predictable transitions instead of urgent and critical take-overs. Predictive human–machine interface (HMI) elements displaying the remaining time until the next request to intervene were identified as a user need, especially when the user is engaging in non-driving related activities (NDRA). However, these estimations are prone to errors due to changing traffic conditions and updated map-based information. Thus, we investigated a confidence display for Level 3 automated driving time estimations. Based on a preliminary study, a confidence display resembling a mobile phone connectivity symbol was developed. In a mixed-design driving simulator study with 32 participants, we assessed the impact of the confidence display concept (within factor) on usability, frustration, trust and acceptance during city and highway automated driving (between factor). During automated driving sections, participants engaged in a naturalistic visual NDRA to create a realistic scenario. Significant effects were found for the scenario: participants in the city experienced higher levels of frustration. However, the confidence display has no significant impact on the subjective evaluation and most participants preferred the baseline HMI without a confidence symbol. Document type: Articl

    Principles for External Human-Machine Interfaces

    Get PDF
    Automated vehicles will soon be integrated into our current traffic system. This development will lead to a novel mixed-traffic environment where connected and automated vehicles (CAVs) will have to interact with other road users (ORU). To enable this interaction, external human–machine interfaces (eHMIs) have been shown to have major benefits regarding the trust and acceptance of CAVs in multiple studies. However, a harmonization of eHMI signals seems to be necessary since the developed signals are extremely varied and sometimes even contradict each other. Therefore, the present paper proposes guidelines for designing eHMI signals, taking into account important factors such as how and in which situations a CAV needs to communicate with ORU. The authors propose 17 heuristics, the so-called eHMI-principles, as requirements for the safe and efficient use of eHMIs in a systematic and application-oriented manner

    From HMI to HMIs: Towards an HMI Framework for Automated Driving

    No full text
    During automated driving, there is a need for interaction between the automated vehicle (AV) and the passengers inside the vehicle and between the AV and the surrounding road users outside of the car. For this purpose, different types of human machine interfaces (HMIs) are implemented. This paper introduces an HMI framework and describes the different HMI types and the factors influencing their selection and content. The relationship between these HMI types and their influencing factors is also presented in the framework. Moreover, the interrelations of the HMI types are analyzed. Furthermore, we describe how the framework can be used in academia and industry to coordinate research and development activities. With the help of the HMI framework, we identify research gaps in the field of HMI for automated driving to be explored in the future

    Does a Confidence Level for Automated Driving Time Estimations Improve the Subjective Evaluation of an Automation HMI?

    No full text
    Current research in human factors and automated driving is increasingly focusing on predictable transitions instead of urgent and critical take-overs. Predictive human–machine interface (HMI) elements displaying the remaining time until the next request to intervene were identified as a user need, especially when the user is engaging in non-driving related activities (NDRA). However, these estimations are prone to errors due to changing traffic conditions and updated map-based information. Thus, we investigated a confidence display for Level 3 automated driving time estimations. Based on a preliminary study, a confidence display resembling a mobile phone connectivity symbol was developed. In a mixed-design driving simulator study with 32 participants, we assessed the impact of the confidence display concept (within factor) on usability, frustration, trust and acceptance during city and highway automated driving (between factor). During automated driving sections, participants engaged in a naturalistic visual NDRA to create a realistic scenario. Significant effects were found for the scenario: participants in the city experienced higher levels of frustration. However, the confidence display has no significant impact on the subjective evaluation and most participants preferred the baseline HMI without a confidence symbol

    Effects of Marking Automated Vehicles on Human Drivers on Highways

    No full text
    Due to the short range of the sensor technology used in automated vehicles, we assume that the implemented driving strategies may initially differ from those of human drivers. Nevertheless, automated vehicles must be able to move safely through manual road traffic. Initially, they will behave as carefully as human learners do. In the same way that driving-school vehicles tend to be marked in Germany, markings for automated vehicles could also prove advantageous. To this end, a simulation study with 40 participants was conducted. All participants experienced three different highway scenarios, each with and without a marked automated vehicle. One scenario was based around some roadworks, the next scenario was a traffic jam, and the last scenario involved a lane change. Common to all scenarios was that the automated vehicles strictly adhered to German highway regulations, and therefore moved in road traffic somewhat differently to human drivers. After each trial, we asked participants to rate how appropriate and disturbing the automated vehicle’s driving behavior was. We also measured objective data, such as the time of a lane change and the time headway. The results show no differences for the subjective and objective data regarding the marking of an automated vehicle. Reasons for this might be that the driving behavior itself is sufficiently informative for humans to recognize an automated vehicle. In addition, participants experienced the automated vehicle’s driving behavior for the first time, and it is reasonable to assume that an adjustment of the humans’ driving behavior would take place in the event of repeated encounters

    Information Needs and Visual Attention during Urban, Highly Automated Driving—An Investigation of Potential Influencing Factors

    No full text
    During highly automated driving, the passenger is allowed to conduct non-driving related activities (NDRA) and no longer has to act as a fallback at the functional limits of the driving automation system. Previous research has shown that at lower levels of automation, passengers still wish to be informed about automated vehicle behavior to a certain extent. Due to the aim of the introduction of urban automated driving, which is characterized by high complexity, we investigated the information needs and visual attention of the passenger during urban, highly automated driving. Additionally, there was an investigation into the influence of the experience of automated driving and of NDRAs on these results. Forty participants took part in a driving simulator study. As well as the information presented on the human–machine interface (system status, navigation information, speed and speed limit), participants requested information about maneuvers, reasons for maneuvers, environmental settings and additional navigation data. Visual attention was significantly affected by the NDRA, while the experience of automated driving had no effect. Experience and NDRA showed no significant effect on the need for information. Differences in information needs seem to be due to the requirements of the individual passenger, rather than the investigated factors

    Multi-Vehicle Simulation in Urban Automated Driving: Technical Implementation and Added Benefit

    No full text
    This article investigates the simultaneous interaction between an automated vehicle (AV) and its passenger, and between the same AV and a human driver of another vehicle. For this purpose, we have implemented a multi-vehicle simulation consisting of two driving simulators, one for the AV and one for the manual vehicle. The considered scenario is a road bottleneck with a double-parked vehicle either on one side of the road or on both sides of the road where an AV and a simultaneously oncoming human driver negotiate the right of way. The AV communicates to its passenger via the internal automation human–machine interface (HMI) and it concurrently displays the right of way to the human driver via an external HMI. In addition to the regular encounters, this paper analyzes the effect of an automation failure, where the AV first communicates to yield the right of way and then changes its strategy and passes through the bottleneck first despite oncoming traffic. The research questions the study aims to answer are what methods should be used for the implementation of multi-vehicle simulations with one AV, and if there is an added benefit of this multi-vehicle simulation compared to single-driver simulator studies. The results show an acceptable synchronicity for using traffic lights as basic synchronization and a distance control as the detail synchronization method. The participants had similar passing times in the multi-vehicle simulation compared to a previously conducted single-driver simulation. Moreover, there was a lower crash rate in the multi-vehicle simulation during the automation failure. Concluding the results, the proposed method seems to be an appropriate solution to implement multi-vehicle simulation with one AV. Additionally, multi-vehicle simulation offers a benefit if more than one human affects the interaction within a scenario

    Principles for External Human–Machine Interfaces

    Get PDF
    Automated vehicles will soon be integrated into our current traffic system. This development will lead to a novel mixed-traffic environment where connected and automated vehicles (CAVs) will have to interact with other road users (ORU). To enable this interaction, external human–machine interfaces (eHMIs) have been shown to have major benefits regarding the trust and acceptance of CAVs in multiple studies. However, a harmonization of eHMI signals seems to be necessary since the developed signals are extremely varied and sometimes even contradict each other. Therefore, the present paper proposes guidelines for designing eHMI signals, taking into account important factors such as how and in which situations a CAV needs to communicate with ORU. The authors propose 17 heuristics, the so-called eHMI-principles, as requirements for the safe and efficient use of eHMIs in a systematic and application-oriented manner

    How Visual Cues on Steering Wheel Improve Users’ Trust, Experience, and Acceptance in Automated Vehicles

    No full text
    With the introduction of ADAS systems and vehicle automation, an interface informing the driver of the automation state is required. This study evaluates the suitability of a visual interface comprising up to 64 LEDs on the steering wheel perimeter; it displays continuous visual feedback about the automation state—including notifications of an unscheduled hand-over due to sudden system failure. Three HMI (Human Machine Interface) designs were evaluated: two versions with visual cues on the steering wheel and one without (baseline). We implemented the designs in a driving simulator and compared the subjective responses of 38 participants to questionnaires measuring user experience, trust, and acceptance. The designs with visual cues improved the participants’ user experience, as well as their trust in, and acceptance of, automated vehicles. Moreover, both designs were well perceived by participants
    corecore