Inorganic elemental analysis and identification of residual monomers released from different glass ionomer cements in cell culture medium

INTRODUCTION: Glass ionomer cements (GICs) release inorganic elements and organic residual monomers with the potential for deleterious effects on pulp cells. OBJECTIVE: To identify and quantify inorganic elements present in different GICs and released components from these materials in cell culture medium. MATERIAL AND METHOD: Samples of two resin-modified GICs for base/liner (Vitrebond and Fuji Lining LC), two resin-modified restorative GICs (Vitremer and Fuji II LC) and two conventional restorative GICs (Ketac Fil Plus and Ketac Molar Easymix) were prepared and analyzed by Energy-Dispersive X-Ray Fluorescence Spectrometry (EDXRF). Extracts of these materials were obtained by immersion of each sample in separate containers of DMEM for 24 h (total surface-liquid ratio = 45.7 mm²/mL). The extracts were analyzed by EDXRF and Gas Chromatography-Mass Spectrometry (GC-MS). RESULT: Higher percentages of strontium, silicon and aluminum were identified in Vitrebond, Vitremer, Fuji Lining LC, Fuji II LC, and Ketac Fil Plus, while zinc was detected only in Vitrebond. Ketac Molar Easymix presented a greater atomic composition of lanthanum, calcium, aluminum and silicon. Strontium was detected in the extracts from all materials except Ketac Molar Easymix; calcium was present in extracts from Ketac Fil Plus; zinc only in Vitrebond; and silicon in Fuji II LC extract. The analysis by GC-MS detected 2-hydroxyethyl-methacrylate (HEMA) in the extracts from all resin-modified GICs, and iodine benzene was detected only in the Vitrebond extract. CONCLUSION: Of the GICs sampled, Vitrebond released the highest number of components with cytotoxic potential.INTRODUÇÃO: Os cimentos de ionômero de vidro (CIVs) liberam elementos inorgânicos e monômeros orgânicos residuais que têm o potencial de causar efeitos deletérios sobre as células pulpares. OBJETIVO: Identificar e quantificar os elementos inorgânicos presentes em diferentes CIVs, bem como os componentes liberados por estes materiais em meio de cultura celular. MATERIAL E MÉTODO: Espécimes cilindricos de dois CIVs modificados por resina para base/forramento (Vitrebond e Fuji Lining LC), dois CIVs modificados por resina restauradores (Vitremer e Fuji II LC) e dois CIVs convencionais restauradores (Ketac Fil Plus e Ketac Molar Easymix) foram preparados e analisados por Espectrometria de Fluorescência de Raios X por Energia Dispersiva (EDXRF). Em seguida, extratos de 24h desses materiais foram obtidos e analisados por EDXRF e por Cromatografia Gasosa/Espectrometria de Massa (CG/EM). RESULTADO: Os elementos inorgânicos identificados em maior porcentagem nos CIVs Vitrebond, Fuji Lining LC, Vitremer, Fuji II LC e Ketac Fil Plus foram estrôncio, silício e alumínio, enquanto o zinco foi detectado apenas no Vitrebond. O Ketac Molar Easymix apresentou maior porcentagem dos elementos lantânio, cálcio, alumínio e silício. Estrôncio foi detectado nos extratos de todos os materiais, exceto no Ketac Molar Easymix; cálcio estava presente no extrato do Ketac Fil Plus; zinco apenas no Vitrebond; e silício no extrato do Fuji II LC . O HEMA foi identificado nos extratos de todos os CIVs modificados por resina, e o iodobenzeno, somente no Vitrebond. CONCLUSÃO: Entre os CIVs estudados, o Vitrebond é o que libera mais componentes com potencial citotóxico.Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq

Effects of liver S9 enzymes on somalargine and solasodine cytotoxicity and mass spectrometric fragmentation

The steroidal glycoalkaloid solamargine and its parent aglycone solasodine, isolated from Solanum palinacanthum, were studied in vitro for cytotoxicity and biotransformation by the hepatic S9 fraction as the metabolic activating system. The MTT uptake assay was used to determine viability after 24 h in RAW 264.7 mouse macrophage-like and SiHa cells exposed to various concentrations of the alkaloids in the presence and absence of the hepatic S9 microsomal fraction. The dose-response curves were established for solamargine and solasodine in the presence and absence of external metabolizing system. From these data, the cytotoxic index (CI50) was calculated with mean values of 7.2 and 13.6 μg/mL for Raw cells and 8.6 and 26.0 μg/mL for SiHa cells, respectively. Mass spectrometry was performed to compare the fragmentation patterns of the alkaloids to predict metabolism by the S9 fraction. The mass spectra demonstrated a distinct fragmentation patterns for solamargine and solasodine after the addition of the S9 fraction. In the present study, we demonstrate that the cytotoxic effect of solamargine and solasodine and their metabolites prepared in vitro by biotransformation with the S9 fraction are comparable. These findings suggest that the metabolic activation system S9 fraction may fail to suppress the cytotoxicity of these alkaloids. © 2013 Springer-Verlag Berlin Heidelberg

Inorganic elemental analysis and identification of residual monomers released from different glass ionomer cements in cell culture medium

INTRODUCTION: Glass ionomer cements (GICs) release inorganic elements and organic residual monomers with the potential for deleterious effects on pulp cells. OBJECTIVE: To identify and quantify inorganic elements present in different GICs and released components from these materials in cell culture medium. MATERIAL AND METHOD: Samples of two resin-modified GICs for base/liner (Vitrebond and Fuji Lining LC), two resin-modified restorative GICs (Vitremer and Fuji II LC) and two conventional restorative GICs (Ketac Fil Plus and Ketac Molar Easymix) were prepared and analyzed by Energy-Dispersive X-Ray Fluorescence Spectrometry (EDXRF). Extracts of these materials were obtained by immersion of each sample in separate containers of DMEM for 24 h (total surface-liquid ratio = 45.7 mm²/mL). The extracts were analyzed by EDXRF and Gas Chromatography-Mass Spectrometry (GC-MS). RESULT: Higher percentages of strontium, silicon and aluminum were identified in Vitrebond, Vitremer, Fuji Lining LC, Fuji II LC, and Ketac Fil Plus, while zinc was detected only in Vitrebond. Ketac Molar Easymix presented a greater atomic composition of lanthanum, calcium, aluminum and silicon. Strontium was detected in the extracts from all materials except Ketac Molar Easymix; calcium was present in extracts from Ketac Fil Plus; zinc only in Vitrebond; and silicon in Fuji II LC extract. The analysis by GC-MS detected 2-hydroxyethyl-methacrylate (HEMA) in the extracts from all resin-modified GICs, and iodine benzene was detected only in the Vitrebond extract. CONCLUSION: Of the GICs sampled, Vitrebond released the highest number of components with cytotoxic potential

Artigo COMPOSITION AND ANTIFUNGAL ACTIVITY OF ESSENTIAL OILS FROM Piper aduncum, Piper arboreum AND Piper tuberculatum

Recebido em 23/2/05; aceito em 16/9/05; publicado na web em 14/3/06 The composition of essential oils from leaves, stems and fruits of Piper aduncum, P. arboreum and P. tuberculatum was examined by means of GC-MS and antifungal assay. There was a predominance of monoterpenes in P. aduncum and P. tuberculatum and of sesquiterpenes in P. arboreum. P. aduncum showed the richest essential oil composition, including linalool. The essential oils from fruits of P. aduncum and P. tuberculatum showed the highest antifungal activity with the MIC of 10 µg as determined against Cladosporium cladosporioides and C. sphaerospermum, respectively. This is the first report of the composition of essential oils from P. tuberculatum