Recent trends in biodiesel production from commonly used animal fats

Changes in climate due to the enormous amount of carbon dioxide emissions have really encouraged the development of energy sources that are renewable, sustainable, and eco-friendly. The development of alternative energy sources can also be attributed to the rapid decrease in resources of fossil energy. Biodiesel has gained significant interest in recent years due to its fossil fuel–like properties and sustainable and eco-friendly characteristics. However, most biodiesels are expensive because of the high cost of feedstock largely based on edible vegetable oil sources. The use of animal fats waste as cost effective feedstock in biodiesel production has gained considerable attention in recent years. Although, most studies regarding the use of animal wastes as feedstock in biodiesel production are still in the early stages, the advantages of this type of feedstock have been highlighted in the literature. However, most studies have not focus on the recent advances in the use of animal fats waste. The studies on the use of novel approach have been reported in isolation. Therefore, this current study attempts to highlight recent developments of the most commonly used animal fats waste in the production of biodiesel. In addition, emphasis was given to the most appropriate production technique, catalyst, energy requirement, and optimum reaction conditions

Development of Solar Powered Biodiesel Reactor for Kuwait Sheep Tallow

Biodiesel is one of the more recent green fuel products in the world. It can be produced from several raw materials such as straight vegetable oils, animal fats, tallow, and waste cooking oils, and blended with diesel. Properties of biodiesel are different compared to fossil diesel in terms of production methods and emission levels released after combustion in an internal combustion engine. Kuwait consumes a huge amount of energy which is almost 8% to meet the increasing demand for electricity and water. Moreover, the use of electricity in the production of biodiesel increases energy use and cost of production. Kuwait is receiving an amount of solar irradiation ranging from 2050 kWh/m2 to 2100 kWh/m2. The present study is concerned with the evaluation of the potential to use solar energy to produce biodiesel from sheep fat waste as a raw material. An experimental test rig was set up for a single cylinder diesel engine in the laboratory, where a solar power system was used to assist the production process of biodiesel from tallow waste. The biodiesel is then blended with diesel at different volume percentages, such as graded as B20, B50, B75 and B100, respectively. The exhaust gases such as oxygen, carbon monoxide, carbon dioxide, nitric oxide and nitric dioxide where also analyzed. An optimum decrease in values of nitric oxide levels was observed at the load of 51%, 68%, 85% and 93% during the operation at blend of biodiesel B20, B50, B75 and B100, respectively. Nitric dioxide was decreased at the load of 51%, 68% and 85% during the operation using B20, B50 and B75, respectively. Optimum SFC was achieved at B20, B50 and B75 during high loads of 85% and 93%. It can be concluded that sheep tallow biodiesel shows a promising result in terms of fuel consumption and environmental emissions of greenhouse gases

Development of solar-powered biodiesel reactor for Kuwait sheep tallow

Biodiesel is one of the recent green fuel production in the world, where it can be produced from several raw materials such as straight vegetable oils, animal fats, tallow and waste cooking oils etc, and blended with diesel. Properties of biodiesel are different compared to the fossil diesel in terms of production methods and emission levels released after the combustion in internal combustion engine. Kuwait consumes a huge amount of energy which is almost 8% to meet the increasing demand for electricity and water. Also, the use of electricity in the production of biodiesel adversely increases energy use and cost of production. While Kuwait is receiving the amount of irradiation from 2050 KWh/m² to 2100 KWh/m². Besides that, to the best of our knowledge there are no previous studies applied solar powered in producing biodiesel in Kuwait. The present study is concerned with the evaluation of the potential of using solar energy to produce biodiesel from sheep fat waste as a raw material due to its less cost, more efficient and renewable method. An experimental test rig was set up for a single cylinder diesel engine in the laboratory, where the solar system was used to assist the production process of biodiesel from tallow waste. The biodiesel is then blended with diesel at different volume percentages, such as graded as B20, B50, B75 and B100 respectively. The performance of the biodiesel was also investigated on a single-cylinder four-stroke diesel engine. The exhaust gases such as oxygen, carbon monoxide, carbon dioxide, nitric oxide and nitric dioxide where also analyzed. A solar system was designed and applied effectively to power the reactor for biodiesel production system. The designed solar system was consisted of solar cells, solar panels, two sources of electricity (12-volt DC and 240-volt AC power supply), adapter and 8-batteries. An optimum decrease values of nitric oxide level was observed at the load of 51%, 68%, 85% and 93% during the operation at blend of biodiesel B20, B50, B75, B100, respectively. Nitric dioxide was decreased at the load of 51%, 68% and 85% during the operation using of B20, B50, and B75. Optimum sfc was achieved at B20, B50, B75 during high loads of 85% and 93%. It can be concluded that sheep tallow biodiesel shows a promising result in terms of fuel consumption and environmental emissions of greenhouse gases

Application of Ultrasonic Atomization on a Micro Jet Engine Using Biofuel for Improving Performance

Jet engines are commonly used in aeronautical applications, and are one of the types of gas turbine engines. The circulation of air releases heat energy to expand the volume of hot fluids and impact the turbine wheel to generate power of hot gases. The present study investigates the potential of using ultrasonic atomization technology to assist in the combustion process. An experimental rig was set up to determine the performance of jet engines using ultrasonic droplets. A gas analyzer was used to measure various greenhouse emissions of exhaust gas. The performance of the engine was tested under three load levels (high, medium, low), starting from 10 psi at a steady state, to the minimum value. A significant result was tested for a low value of nitrogen monoxide at the three levels of load, and a specific result was tested for an efficiency value of 2% at the three levels of load. Carbon dioxide was found to decrease at the low load level. The use of an ultrasonic atomization device to assist in the combustion process was useful in achieving engine efficiency of 1% and a reduction of 25% in carbon dioxide exhaust gas

Impact of plasma combustion technology on micro gas turbines using biodiesel fuels

The adoption of biorenewable alternative fuel resources from biofuels (ethanol or biodiesel) has produced promising solutions to reduce some toxic greenhouse gas (GHG) emissions from gas turbine engines (GTEs). Despite the reduced hydrocarbon associated with adopting alternative bio-renewable fuel resources, GTE operations still emit toxic gases due to inefficient engine performance. In this study, we assess the impact of the integration of plasma combustion technology on a micro-GTE using biodiesel fuel from animal fat with the aim of addressing performance, fuel consumption, and GHG emission reduction limitations. Laboratory design, fabrication, assembly, testing, and results evaluation were conducted at Kuwait’s Public Authority for Applied Education and Training. The result indicates the lowest toxic emissions of sulfur, nitrogen oxide (NO), NO2, and CO were from the biodiesel blended fuels. The improved thermal efficiency of GTE biodiesel due to the volume of hydrogen plasma injected improves the engine’s overall combustion efficiency. Hence, this increases the compressor inlet and outlet firing temperature by 13.3 °C and 6.1 °C, respectively. The Plasma technology produced a thrust increment of 0.2 kgf for the highest loading condition, which significantly impacted horsepower and GTE engine efficiency and reduced the cost of fuel consumption

Impact of Plasma Combustion Technology on Micro Gas Turbines Using Biodiesel Fuels

The adoption of biorenewable alternative fuel resources from biofuels (ethanol or biodiesel) has produced promising solutions to reduce some toxic greenhouse gas (GHG) emissions from gas turbine engines (GTEs). Despite the reduced hydrocarbon associated with adopting alternative bio-renewable fuel resources, GTE operations still emit toxic gases due to inefficient engine performance. In this study, we assess the impact of the integration of plasma combustion technology on a micro-GTE using biodiesel fuel from animal fat with the aim of addressing performance, fuel consumption, and GHG emission reduction limitations. Laboratory design, fabrication, assembly, testing, and results evaluation were conducted at Kuwait’s Public Authority for Applied Education and Training. The result indicates the lowest toxic emissions of sulfur, nitrogen oxide (NO), NO2, and CO were from the biodiesel blended fuels. The improved thermal efficiency of GTE biodiesel due to the volume of hydrogen plasma injected improves the engine’s overall combustion efficiency. Hence, this increases the compressor inlet and outlet firing temperature by 13.3 °C and 6.1 °C, respectively. The Plasma technology produced a thrust increment of 0.2 kgf for the highest loading condition, which significantly impacted horsepower and GTE engine efficiency and reduced the cost of fuel consumption