PENGARUH LAYANAN INFORMASI SEBAGAI TINDAKAN PREVENTIF TERHADAP BAHAYA PENYALAHGUNAAN NAPZA (NARKOTIKA, PSIKOTROPIKA, DAN OBAT TERLARANG) PADA SISWA KELAS X PERHOTELAN 1 SMK NEGERI 7 KOTA BENGKULU

Penelitian ini bertujuan untuk mendeskripsikan pengaruh layanan informasi terhadap pemahaman siswa sebagai tindakan preventif mengenai bahaya penyalahgunaan NAPZA. Metode yang digunakan dalam penelitian ini adalah eksperimen dengan desain one-group pre-test-post-test design. Sampel penelitian terdiri dari 35 siswa kelas X Perhotelan 1 SMKN 7 Kota Bengkulu yang diambil dengan metode purposive sampling, yaitu menentukan sendiri subjek yang akan diambil secara sengaja berdasarkan kriteria tertentu. Teknik pengumpulan data menggunakan angket. Teknik analisis data menggunakanuji T. Hasil penelitian menunjukkan bahwa tingkat pemahaman siswa sebagai tindakan preventif terhadap bahaya penyalahgunaan NAPZA meningkat setelah diberikan layanan informasi. Hal ini ditunjukkan dari hasil uji perbedaan pre-test dan post-test dengan nilai signifikasi 0,000 (p<0,05), sehingga hipotesis (  ditolak dan ) diterima. Artinya ada pengaruh yang signifikan layanan Informasi terhadap tingkat pemahaman bahaya penyalahgunaan NAPZA.Kata kunci : layanan informasi, tindakan preventif, bahaya penyalahgunaan NAPZ

Functionalization of Strontium Ferrite Nanoparticles with Novel Chitosan–Schiff Base Ligand for Efficient Removal of Pb(II) Ions from Aqueous Media

Lead contamination in water poses significant health risks, making its removal imperative. In this study, magnetic strontium ferrite (SrFe12O19) nanoparticles were facilely synthesized by the Pechini sol–gel method and subsequently functionalized with a novel chitosan–Schiff base ligand to obtain a novel inorganic/organic nanocomposite for removing Pb(II) ions from aqueous solutions. The chitosan–Schiff base ligand was synthesized through the reaction of chitosan with 2,4,5-trihydroxybenzaldehyde. The presence of two X-ray diffraction (XRD) peaks at 2Ɵ = 10.5° and 2Ɵ = 20.5°, alongside the characteristic SrFe12O19 peaks, confirmed the functionalization of the nanoparticles with the ligand. Additionally, a significant decrease in the saturation magnetization value from 40.29 emu/g in pure SrFe12O19 nanoparticles to 17.32 emu/g in the nanocomposite further verified the functionalization. The presence of carbon (C) and nitrogen (N) atoms in the energy-dispersive X-ray (EDX) pattern of the nanocomposite, in addition to iron (Fe), strontium (Sr), and oxygen (O), also confirmed the functionalization. The nanocomposite’s maximum adsorption capacity for Pb(II) ions was 390.63 mg/g. Moreover, the adsorption process is endothermic, spontaneous, and chemical, occurring via complexation with -C=N and -OH groups, and it fits well with the Langmuir equilibrium isotherm and the pseudo-second-order kinetic equation

Significant photocatalytic decomposition of malachite green dye in aqueous solutions utilizing facilely synthesized barium titanate nanoparticles

Abstract The release of malachite green dye into water sources has detrimental effects on the liver, kidneys, and respiratory system. Additionally, this dye can impede photosynthesis and disrupt the growth and development of plants. As a result, in this study, barium titanate nanoparticles (BaTiO3) were facilely synthesized using the Pechini sol–gel method at 600 °C (abbreviated as EA600) and 800 °C (abbreviated as EA800) for the efficient removal of malachite green dye from aqueous media. The Pechini sol–gel method plays a crucial role in the production of barium titanate nanoparticles due to its simplicity and ability to precisely control the crystallite size. The synthesized barium titanate nanoparticles were characterized by several instruments, such as X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), Fourier transform infrared spectroscopy, and a diffuse reflectance spectrophotometer. The XRD analysis confirmed that the mean crystallite size of the EA600 and EA800 samples is 14.83 and 22.27 nm, respectively. Furthermore, the HR-TEM images confirmed that the EA600 and EA800 samples exhibit irregular and polyhedral structures, with mean diameters of 45.19 and 72.83 nm, respectively. Additionally, the synthesized barium titanate nanoparticles were utilized as catalysts for the effective photocatalytic decomposition of malachite green dye in aqueous media. About 99.27 and 93.94% of 100 mL of 25 mg/L malachite green dye solution were decomposed using 0.05 g of the EA600 and EA800 nanoparticles within 80 min, respectively. The effectiveness of synthesized BaTiO3 nanoparticles as catalysts stems from their unique characteristics, including small crystallite sizes, a low rate of hole/electron recombination owing to ferroelectric properties, high chemical stability, and the ability to be regenerated and reused multiple times without any loss in efficiency

Synthesis, Molecular Docking Studies, In Vitro Antimicrobial and Antifungal Activities of Novel Dipeptide Derivatives Based on N-(2-(2-Hydrazinyl-2-oxoethylamino)-2-oxoethyl)-Nicotinamide

A series of linear dipeptide derivatives (4–10) were prepared and evaluated as antimicrobial agents via the synthesis of N-(2-(2-hydrazinyl-2-oxoethylamino)-2-oxoethyl) nicotinamide (4). Compound 4 was reacted with 4-chlorobenzaldehyde or 4-hydroxybenzaldehyde, to give the hydrazones 5 and 6, respectively. On the other hand, Compound 4 was coupled with phenylisocyanate or methylisothiocyanate to give Compounds 7 and 8, respectively. The latter compounds (7 and 8) were coupled with chloroacetic acid to give oxazolidine (9) and thiazolidine (10), respectively. The newly synthesized dipeptide compounds were confirmed by means of their spectral data. The antimicrobial activity of the newly synthesized compounds 4–10 was evaluated by agar well diffusion, and they showed good activity. Compounds 4, 5, and 9 gave the most promising activity in this study. Most of the tested compounds possessed MIC values ranging from 50 to 500 µg/mL. Furthermore, docking studies were carried out on enoyl reductase from E. coli and cytochrome P450 14 α-sterol demethylase (Cyp51) from Candida albicans active sites. The MolDock scores of the seven tested compounds ranged between −117 and −171 and between −107 and −179, respectively

Efficient Disposal of Basic Fuchsin Dye from Aqueous Media Using ZrO₂/MgMn₂O₄/Mg(Mg_0.333Mn_1.333)O₄ as a Novel and Facilely Synthesized Nanocomposite

In this work, amorphous and crystalline novel products based on Zr, Mg, and Mn were facilely fabricated through the Pechini sol–gel procedure using inexpensive chemicals and an uncomplicated apparatus. Also, these products showed high efficiency as novel adsorbents in getting rid of basic fuchsin dye from aqueous solutions. The adsorbent, which was fabricated before calcination, was abbreviated as KE. In addition, the adsorbents, which were created at 500 and 700 °C, were designated as KE500 and KE700, respectively. The created adsorbents were characterized using high-level transmission electron microscopy (HR-TEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), N2 adsorption/desorption analyzer, and field emission scanning electron microscope (FE-SEM). The XRD showed that the KE adsorbent is amorphous, whereas the KE500 and KE700 adsorbents are mixtures of ZrO2, MgMn2O4, and Mg(Mg0.333Mn1.333)O4 nanostructures. The HR-TEM exhibited that the KE adsorbent consists of very fine irregular shapes, whereas the KE500 adsorbent contains quasi-spherical particles with a mean diameter of 45.16 nm. Furthermore, the HR-TEM exhibited that the KE700 adsorbent consists of polyhedral shapes with a mean diameter of 76.28 nm. Furthermore, the BET surface area of the KE, KE500, and KE700 adsorbents is 67.85, 20.15, and 13.60 m2/g, respectively. Additionally, the elimination of basic fuchsin dye by the KE, KE500, and KE700 adsorbents is exothermic, physical in nature, and follows the pseudo-first-order as well as Langmuir equations. Further, the maximum uptake capabilities of the KE, KE500, and KE700 adsorbents toward basic fuchsin dye are 239.81, 174.83, and 93.19 mg/g, respectively

Facile Synthesis of CuFe₂O₄ Nanoparticles for Efficient Removal of Acid Blue 113 and Malachite Green Dyes from Aqueous Media

This work studies the synthesis, characterization, and application of CuFe2O4 nanoparticles for the removal of acid blue 113 and malachite green dyes from aqueous media. Utilizing the combustion procedure, CuFe2O4 nanoparticles were synthesized using two different fuels: L-alanine (CFA) and L-valine (CFV). Besides, the synthesized CuFe2O4 nanoparticles were characterized through some tools, including Fourier transform infrared (FTIR), X-ray diffraction (XRD), energy-dispersive X-ray (EDX), and field emission scanning electron microscope (FE-SEM). XRD analysis verified the creation of a CuFe2O4 cubic spinel structure without any contaminants, revealing average crystallite sizes of 26.37 and 17.65 nm for the CFA and CFV samples, respectively. The FTIR spectra exhibited peaks indicative of metal-oxygen bond stretching, verifying the presence of a spinel formation. Elemental analysis via EDX confirmed the stoichiometric composition typical of copper ferrite. In addition, FE-SEM displayed that the CFA and CFV samples are composed of particles with spherical and irregular shapes, measuring average diameters of 188.35 and 132.78 nm, respectively. The maximum adsorption capabilities of the CFA and CFV samples towards acid blue 113 dyes are 281.69 and 297.62 mg/g, respectively. Also, the maximum adsorption capabilities of the CFA and CFV products towards malachite green dye are 280.11 and 294.99 mg/g, respectively. Kinetic and equilibrium studies revealed that the adsorption process of acid blue 113 and malachite green dyes onto the CFA and CFV samples followed the pseudo-second-order model and Langmuir isotherm. Thermodynamic analysis indicated that the adsorption process was physical, spontaneous, and exothermic

Facile synthesis of a novel nanocomposite for determination of mercury and copper ions in food and water samples

This paper describes the modification of sodium aluminum silicate hydrate by 3-bromo-5-chlorosalicylaldehyde to form a new composite. Furthermore, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), Transmission electron microscopy (TEM), CHN elemental analysis, Nitrogen gas sorption analyzer, and Scanning electron microscopy (SEM) tools were used for characterizing the synthesized composite. The XRD pattern of the synthesized composite shows a halo at 2Θ = 25°, confirming the destruction of the crystalline structure of the nanomaterial owing to the association with an organic substance. The synthesized composite was utilized for the removal and preconcentration of mercury and copper ions from water and food samples. The maximum adsorption capacity of the synthesized composite towards mercury and copper ions is 107.53 and 130.89 mg/g, respectively. In addition, the relative standard deviation was less than 3 %, showing excellent reproducibility. The dynamic analytical ranges are 0.8–380 μg/L and 1.00–550 μg/L for copper and mercury ions, respectively. The preconcentration factor is 10

A Novel Oxidovanadium (IV)-Orotate Complex as an Alternative Antidiabetic Agent: Synthesis, Characterization, and Biological Assessments

Diabetes is an increasingly common metabolic disorder with high comorbidity and societal and personal costs. Insulin replacement therapy is limited by a lack of oral bioavailability. Recent studies suggest vanadium has therapeutic potential. A newly synthesized complex between oxidovanadium (IV) and orotic acid (OAH3), [(OAH1)(VO)(NH3)2].3H2O, was characterized using spectroscopic and thermogravimetric techniques. In vivo potential was assessed in a streptozocin-induced rat model of diabetes. OAH3 acts as a bidentate ligand in the formation of the dark green, crystalline oxidovanadium (IV) complex in a square pyramidal configuration. Treatment with oxidovanadium (IV)-orotate in vivo significantly improved many biochemical parameters with minimal toxicity and restored pancreatic and hepatic histology. The results of the present work describe a safe, new compound for the treatment of diabetes

Synthesis, Characterization, and Anti-diabetic Activity of Some Novel Vanadium-Folate-Amino Acid Materials

A new six intraperitoneal injections insulin-mimetic vanadyl(IV) compounds [(VO)(FA)(AAn)] (where n = 1–6: AA1 = isoleucine, AA2 = threonine, AA3 = proline, AA4 = phenylalanine, AA5 = lysine, and AA6 = glutamine) were synthesized by the chemical reactions between folic acid (FA), VOSO4, and amino acids (AAn) with equal molar ratio 1:1:1 in neutralized media. These complexes were characterized by elemental analysis and estimation of vanadyl(IV) metal ions. The thermal stability behavior of these complexes was studied by TG-DTG-DTA analyses. The structures of these complexes were elucidated by spectroscopic methods like infrared, electron spin resonance (ESR), and solid reflectance spectroscopes. The powder X-ray diffraction (XRD) study suggested the crystalline nature of the complexes. Magnetic moments and electronic spectra revealed the square-pyramid geometrical structure of the complexes. The conductivity results refereed that all synthesized vanadyl(IV) complexes were of a non-electrolyte behavior. The infrared spectra assignments of these complexes revealed that the FAH2 and AAn chelates act as a bidentate ligation. The chelation towards vanadyl (IV) ions existed via deprotonation of one of the carboxylic groups of FAH2 drug ligand, and so amino acids act as bidentate ligands via N-amino and O-carboxylate groups. Both scanning and transmission electron microscope (SEM and TEM) techniques were used to investigate the surface morphology. The main task of this research is the aim of designing a new insulin alternative antidiabetic drug agent. The antidiabetic efficiency of these complexes was evaluated in streptozotocin-induced diabetic male albino rats. Liver and kidney functions, insulin and blood glucose levels, lipid profile, and superoxide dismutase antioxidant (SOD) are verified identifiers for the efficiency of VO(IV)/FA/AAn system compounds as antidiabetic drug agents

Electron-transfer complexation of morpholine donor molecule with some π – acceptors: Synthesis and spectroscopic characterizations

Morpholine is an interesting moiety that used widely in several organic syntheses. The intermolecular charge-transfer (CT) complexity associated between morpholine (Morp) donor with (monoiodobromide “IBr”, 2,3-dichloro-5,6-dicyano-1,4-benzoquinone “DDQ”, 2,6-dichloroquinone-4-chloroimide “DCQ” and 2,6-dibromoquinone-4-chloroimide “DBQ”) π–acceptors have been spectrophotometrically investigated in CHCl3 and/or MeOH solvents. The structures of the intermolecular charge-transfer (CT) were elucidated by spectroscopic methods like, infrared spectroscopy. Also, different analyses techniques such as UV-Vis and elemental analyses were performed to characterize the four morpholine [(Morp)(IBr)], [(Morp)(DDQ)], [(Morp)(DCQ)] and [(Morp)(DBQ)] CT-complexes which reveals that the stoichiometry of the reactions is 1:1. The modified Benesi-Hildebrand equation was utilized to determine the physical spectroscopic parameters such as association constant (K) and the molar extinction coefficient (ε)