An Analytical Investigation of Thermal Buckling Behavior of Composite Plates Reinforced by Carbon Nano Particles

The research used analytical and numerical methods to test thermal buckling activity for a composite plate structure with a range of Nano fractions. Experimental program with mechanical properties for the Nano composites were carried out and have been validated from previous work. In addition, both mechanical and thermal expansions were tested from previous work experimentally and used in numerical and analytical methods by the Nano composite. The general motion equation for thermal buckling load was derived and then, the results were compared with the numerical results. The analysis showed that the average outcome error was not greater (2.49%). Ultimately, the results showed that the thermal effect results in a buckling of Nano particle strengthening (1%) volume fraction for the adjusted structure of the plate leads to increase thermal buckling strength (63,4%). This achievement modified a high thermal buckling strength with low percentage of Nano volume fraction compared to the previous work in this field

Optimization of Friction Stir Spot Welding Parameters of Al6061T6 by Hybrid Approached

The most important way for joining the non-welding aluminum alloy is Friction stir spot welding. Three parameters effect on efficiency of welding: tool shape, rotational speed, and plunged time, are chosen to study for welding 6061T6 aluminum alloy. Each of the above parameters has three variables as: pin shapes (square, cylinder, and hexagonal), plunged time (50, 70,100) sec  and rotational speeds (710, 1120, 1800) rpm hybrid approach which is consist of the experiment run, neural network and social spider optimization is used to optimize the welding conditions by finding the maximum ultimate force. The best condition of the weldments is (square, 710rpm, 100sec) with maximum shear force 4740N. The best results obtained from hybrid optimization with experimental results; with discrepancy of 2%

Free Vibration Analysis of Composite Cylindrical Shell Reinforced with Silicon Nano-Particles: Analytical and FEM Approach

Previous research presented the effect of nanomaterials on the mechanical properties of composite materials with various volume fraction effects; in addition, their research presented the effect of nanomaterials on the same mechanical characteristics for a composite plate structure, such as vibration and thermal buckling behavior. Therefore, since the use of shell structures is for large applications, it is necessary to investigate the modification of the vibration characteristics of its design with the effect of nanomaterials and study the influence of other reinforced nanoparticle types on its features. Therefore, in this work, silicon nanoparticles were selected to investigate their effect on the vibration behavior of a shell structure. As a result, this work included studying the vibration behavior by testing the shell structure with a vibration test machine. In addition, after manufacturing the composite material shell with various silicon volume fractions, the mechanical properties were evaluated. In addition, the finite element technique with the Ansys program was used to assess and compare the vibration behavior of the shell structure using the numerical technique. The comparison of the results gave an acceptable percentage error not exceeding 10.93%. Finally, the results evaluated showed that the modification with silicon nanomaterials gave very good results since the nanomaterials improved about 65% of the shell's mechanical properties and vibration characteristics

Effect of Friction Stir Welding and Friction Stir Processing Parameters on The Efficiency of Joints

Friction Stir Welding is one of the most practical welding process at the solid state. Friction Stir Processing is used to enhance the microstructure of FSW welded zone. The present study investigates the effect of welding parameters on the tensile properties   of FSW and FSP  joining 3 mm  AA 5083 - H111 aluminum alloy by means of  stress – strain curve with a uniaxial tensile test and by comparing the efficiency between FSW , FSP and base metal .The experiments were conducted with 1000,1500 and 2000 rpm rotation speeds ,and 20,40 and 60 mm/min travel speed. The best  result of the welding joint was shown at the 20 mm/min feed speed and 1500 rpm rotational speed for FSW, and 40 mm/min feed speed and 1500 rpm rotation speed for FSP. The efficiency of ultimate tensile strength reaches to 92% for FSW and 94% for FSP

Global economic burden of unmet surgical need for appendicitis

Background There is a substantial gap in provision of adequate surgical care in many low- and middle-income countries. This study aimed to identify the economic burden of unmet surgical need for the common condition of appendicitis. Methods Data on the incidence of appendicitis from 170 countries and two different approaches were used to estimate numbers of patients who do not receive surgery: as a fixed proportion of the total unmet surgical need per country (approach 1); and based on country income status (approach 2). Indirect costs with current levels of access and local quality, and those if quality were at the standards of high-income countries, were estimated. A human capital approach was applied, focusing on the economic burden resulting from premature death and absenteeism. Results Excess mortality was 4185 per 100 000 cases of appendicitis using approach 1 and 3448 per 100 000 using approach 2. The economic burden of continuing current levels of access and local quality was US $92 492 million using approach 1 and$73 141 million using approach 2. The economic burden of not providing surgical care to the standards of high-income countries was $95 004 million using approach 1 and$75 666 million using approach 2. The largest share of these costs resulted from premature death (97.7 per cent) and lack of access (97.0 per cent) in contrast to lack of quality. Conclusion For a comparatively non-complex emergency condition such as appendicitis, increasing access to care should be prioritized. Although improving quality of care should not be neglected, increasing provision of care at current standards could reduce societal costs substantially

Global economic burden of unmet surgical need for appendicitis

Background There is a substantial gap in provision of adequate surgical care in many low- and middle-income countries. This study aimed to identify the economic burden of unmet surgical need for the common condition of appendicitis. Methods Data on the incidence of appendicitis from 170 countries and two different approaches were used to estimate numbers of patients who do not receive surgery: as a fixed proportion of the total unmet surgical need per country (approach 1); and based on country income status (approach 2). Indirect costs with current levels of access and local quality, and those if quality were at the standards of high-income countries, were estimated. A human capital approach was applied, focusing on the economic burden resulting from premature death and absenteeism. Results Excess mortality was 4185 per 100 000 cases of appendicitis using approach 1 and 3448 per 100 000 using approach 2. The economic burden of continuing current levels of access and local quality was US $92 492 million using approach 1 and$73 141 million using approach 2. The economic burden of not providing surgical care to the standards of high-income countries was $95 004 million using approach 1 and$75 666 million using approach 2. The largest share of these costs resulted from premature death (97.7 per cent) and lack of access (97.0 per cent) in contrast to lack of quality. Conclusion For a comparatively non-complex emergency condition such as appendicitis, increasing access to care should be prioritized. Although improving quality of care should not be neglected, increasing provision of care at current standards could reduce societal costs substantially