106 research outputs found
Rational synthesis of ternary PtIrNi nanocrystals with enhanced poisoning tolerance for electrochemical ethanol oxidation
The development of highly efficient and durable anode materials for ethanol electro-oxidation remains a challenge. Herein, we report the synthesis of Pt1−x−yIrxNiy nanocrystals via one-step procedure by ultrasonic-assisted co-reduction of the metal precursors using ascorbic acid as a mild reducing agent and pluronic F127 as a structure directing agent. The catalytic performance of this ternary catalyst towards electrochemical oxidation of ethanol was examined and compared to its mono and binary Pt counterparts (Pt, Pt1−xIrx, and Pt1−yNiy) that are synthesized by the same method. TEM analysis showed a porous nanodendritic structure for the synthesized ternary electrocatalyst with an average size of 20 ± 1 nm. The electrochemical measurements revealed an electrochemically active surface area, ECSA, of 73 m2 g−1. The as-synthesized ternary electrocatalyst showed an improved catalytic activity towards ethanol oxidation in 1 M KOH with a measured mass activity of 3.8 A mg−1 which is 1.7, 2.0, and 3.2 times higher than that of Pt1−xIrx, Pt1−yNiy, and Pt, respectively. Additionally, the Pt1−x−yIrxNiy nanocrystals expressed high poisoning tolerance (jf/jb = 4.5) and high durability compared to its mono and binary counterparts.Scopu
Synthesis and Characterization of Soluble Thiophene-Selenophene- and Tellurophene-Vinylene Copolymers
Organic electronic devices based on polymers received significant attention in the last decade, especially for organic photovoltaics (OPVs) and field-effect transistors (OFETs) despite their performances and stability clearly falling short of today's state-of-the-art crystalline silicon or copper indium germanium selenide (CIGS)-based devices. Flexibility in the manufacturing, light weight, lower fabrication cost, ease of integration into various devices, and large area coating are some of the major potential advantages of polymers over inorganic devices.
1 Among organic polymers, conjugated polymers attracted widespread attention for a wide range of applications. Thiophene-containing conjugated polymers, especially, poly(3-alkylthiophne) (P3AT) has been subjected to intensive research over last decade due to their excellent optical and electronic properties.
2 Moreover, poly(thienylenevinylene) (PTV) class of polymers displays high charge carrier mobilities in OFETs and promising performances in OPVs.
3 When a single solubilizing alkyl chain is included onto the PTV backbone, the resulting copolymer can be solution processed for optical devices. One simple strategy to manipulate the copolymer property is by changing the heteroatom of the thiophene from sulfur to other chalcogens, selenium or tellurium.
4 Theoretical calculations indicated that substitution with selenium or tellurium may reduce the optical band gap of the resulting polymer in comparison to their sulfur-containing analogues. Inclusion of larger and more polarizable selenium or tellurium also expected to have a strong influence on the charge transport properties. Notably, Heeney and co-workers showed that the band gap of P3AT can be reduced by as much as 0.3 eV by only substituting sulfur with selenium in the polymer backbone.
5 The reduction of band gap resulted from larger and more polarizable selenium facilitate better π orbital overlap with the polymer backbone and thus stabilize the polymer LUMO (lowest unoccupied molecular orbital). Low-lying LUMO levels are believe to facilitate both electron injection and transport. Recently, PBDTT-SeDPP polymer showed a high Jsc of 16.8 mA/cm2, a Voc of 0.69 V, and a FF of 62%, enabling the best PCE of 7.2%.
6 However, despite fascinating properties of selenium substituted polymers, tellurium containing polymers are less explored, may be due to challenging tellurium chemistry. Jahnke and co-workers recently reported first soluble tellurophene polymer, poly(3-alkyltellurophene) (P3ATe), prepared by both electrochemical and Kumuda coupling polymerization method.
7 Even though, preliminary PCE (1.1%) was modest, tellurium substitution resulted in red-shifted film absorption. In this contribution, we report the synthesis and characterization of vinylene copolymers containing 3-alkylthiophene, selenophene or tellurophene. This allows us systematically investigate the role of selenium or tellurium on the polymer properties. Here, we report the first synthesis of novel 2,5-dibrominated 3-alkyltellurophene monomer and its Pd[0]-catalyzed copolymerization with (E)1,2-bis(tributylstannyl)ethylene to afford poly(3-alkyltellurophenylenevinylene) (P3ATeV).
8 We compare the optoelectronic properties of P3ATeV with analogous sulfur (P3ATV) and selenium (P3ASV) containing polymers. Preliminary OFET data will also be incorporated. Scheme 1. Structures of P3AX, P3AXV copolymers.Qscienc
Microwave-Assisted Solvothermal Synthesis of Mo-Doped TiO2 with Exceptional Textural Properties and Superior Adsorption Kinetics
Assigned to their outstanding physicochemical properties, TiO2-based materials have been studied in various applications. Herein, TiO2 doped with different Mo contents (Mo-TiO2) was synthesized via a microwave-assisted solvothermal approach. This was achieved using titanium (IV) butoxide and molybdenum (III) chloride as a precursor and dodecylamine as a surface directing agent. The uniform effective heating delivered by microwave heating reduced the reaction time to less than 30 min, representing several orders of magnitude lower than conventional heating methods. The average particle size ranged between 9.7 and 27.5 nm and it decreased with increasing the Mo content. Furthermore, Mo-TiO2 revealed mesoporous architectures with a high surface area ranging between 170 and 260 m2 g−1, which is superior compared to previously reported Mo-doped TiO2. The performance of Mo-TiO2 was evaluated towards the adsorption of Rhodamine B (RhB). In contrast to TiO2, which revealed negligible adsorption for RhB, Mo-doped samples depicted rapid adsorption for RhB, with a rate that increased with the increase in Mo content. Additionally, Mo-TiO2 expressed enhanced adsorption kinetics for RhB compared to state-of-the-art adsorbents. The introduced synthesis procedure holds a grand promise for the versatile synthesis of metal-doped TiO2 nanostructures with outstanding physicochemical properties.NPRP Grant no. NPRP 12S-0304-190218 from the Qatar National Research Fund (a member of the Qatar Foundation). The statements made herein are solely the responsibility of the authors
Corrosion properties of duplex treated Ti-6Al-4V alloy in chloride media using electrochemical and positron annihilation spectroscopy techniques
Corrosion properties of duplex treated Ti-6Al-4V alloy in chloride media using electrochemical and positron annihilation spectroscopy techniques
Improved electrochemical performance of SiO2-coated Li-rich layered oxides-Li1.2Ni0.13Mn0.54Co0.13O2
Lithium-rich layered oxides (LLOs) such as Li1.2Ni0.13Mn0.54Co0.13O2 are suitable cathode materials for future lithium-ion batteries (LIBs). Despite some salient advantages, like low cost, ease of fabrication, high capacity, and higher operating voltage, these materials suffer from low cyclic stability and poor capacity retention. Several different techniques have been proposed to address the limitations associated with LLOs. Herein, we report the surface modification of Li1.2Ni0.13Mn0.54Co0.13O2 by utilizing cheap and readily available silica (SiO2) to improve its electrochemical performance. Towards this direction, Li1.2Ni0.13Mn0.54Co0.13O2 was synthesized utilizing a sol-gel process and coated with SiO2 (SiO2 = 1.0 wt%, 1.5 wt%, and 2.0 wt%) employing dry ball milling technique. XRD, SEM, TEM, elemental mapping and XPS characterization techniques confirm the formation of phase pure materials and presence of SiO2 coating layer on the surface of Li1.2Ni0.13Mn0.54Co0.13O2 particles. The electrochemical measurements indicate that the SiO2-coated Li1.2Ni0.13Mn0.54Co0.13O2 materials show improved electrochemical performance in terms of capacity retention and cyclability when compared to the uncoated material. This improvement in electrochemical performance can be related to the prevention of electrolyte decomposition when in direct contact with the surface of charged Li1.2Ni0.13Mn0.54Co0.13O2 cathode material. The SiO2 coating thus prevents the unwanted side reactions between cathode material and the electrolyte. 1.0 wt% SiO2-coated Li1.2Ni0.13Mn0.54Co0.13O2shows the best electrochemical performance in terms of rate capability and capacity retention.This publication was made possible by NPRP Grant # NPRP11S-1225-170128 from Qatar National Research Fund (a member of the Qatar Foundation). Statements made herein are solely the responsibility of the authors. FE-SEM analysis was accomplished at the Central Laboratory Unit (CLU), Qatar University, Doha, Qatar, TEM analysis was conducted at the Core Labs., QEERI, HBKU, Qatar and XPS analysis was accomplished at the Gas Processing Center (GPC), Qatar University, Doha, Qatar.Scopu
Russia and the Arab Spring: supporting the counter-revolution
Russia’s response to the Arab Spring ranged from apprehension to deep anxiety and diverged significantly from the US and the EU responses. While initially
welcoming the popular demands for political reform in North Africa, the Russian reaction rapidly became more critical as a result of Western military intervention into Libya and the threat of the spread of Islamist extremism. It was these twin fears which prompted the Russian leadership to adopt an uncompromizing stance towards Syria. While geopolitical factors certainly played a role in driving Russian strategy, domestic political factors were also more significant. As the Russian leadership felt internally threatened by the growing opposition within the country, conflict in the
Middle East highlighted the perceived flaws of the imposition of Western liberal democracy and the virtues of Russia’s own model of state-managed political order.
There was, as such, a significant ideational and ideological dimension to the Russian response to the Arab Spring
The double [3+2] photocycloaddition reaction
One of a synthetic organic chemists‟ greatest challenges is to create step-efficient routes toward compounds with high molecular complexity. Therefore, reactions such as the meta
photocycloaddition of an olefin to a benzene derivative, which provide more than one bond in a single step are of significant importance. It this remarkable reaction three new σ bonds, three new rings and up to six new stereocenters are formed simultaneously. Additional complexity can be added by tethering the two reacting partners together and this form of the reaction has found many uses in natural product synthesis.
In this work a remarkable double [3+2] photocycloaddition reaction is reported that results in the formation of a complex cis, cis, cis, trans-[5, 5, 5, 5] fenestrane derivative from a simple flat aromatic acetal with two branching alkenes. During this dramatic transformation four carboncarbon bonds, five new rings and seven new stereocenters are created in a single one-pot process using only UV light. The reaction occurs in a sequential manner from the linear meta photocycloadduct, via a secondary [3+2] addition of the alkene across the cyclopropane of the adduct. In addition, an angular meta photocycloadduct also produced in the initial addition step, undergoes an alternative fragmentation-translocation photoreaction to afford a silphinene-like angular tricyclic compound.
In this work the investigation of this newly discovered process is discussed via the synthesis and subsequent irradiation of a series of photosubstrates containing different functional groups in the arene-alkene tether. In addition, attempts toward the synthesis of alternative structures using the same double [3+2] photocycloaddition are reported
One-pot sonochemical synthesis of CdS nanoparticles: photocatalytic and electrical properties
- …